论文信息 - Realization of current mode all-pass networks using a current conveyor

Realization of current mode all-pass networks using a current conveyor

Two novel networks are proposed for realizing a current-mode all-pass filter with high output impedance, using a single current conveyor (CC II) and four passive elements. The networks can be used in cascade without requiring an impedance-matching device. Even with a nonideal CC II, the networks can realize all-pass networks with slightly altered values of the gain and the center frequency. >

M. Higashimura | Y. Fukui | M. Higashimura | Y. Fukui

[1] Yutaka Fukui,et al. Research note Realization of all-pass networks using a current conveyor , 1988 .

[2] R. I. Salawu. Realization of an all-pass transfer function using the second generation current conveyor , 1980 .

[3] P. Aronhime,et al. Transfer-function synthesis using a current conveyor , 1974 .

[4] Tejmal S. Rathore. Active complementary networks , 1980 .

[5] T. S. Rathore,et al. Current-conveyor realisation of transfer function , 1975 .

[6] Brett Wilson,et al. Current mode signal processing circuits , 1988, 1988., IEEE International Symposium on Circuits and Systems.

[7] Ahmed M. Soliman. Inductorless realization of an all-pass transfer function using the current conveyor , 1973 .

[8] Yutaka Fukui,et al. Realization of all-pass and notch filters using a single current conveyor , 1988 .

[9] K. Smith,et al. A second-generation current conveyor and its applications , 1970, IEEE Transactions on Circuit Theory.