Correlation between Ni_3Sn_4 intermetallics and Ni_3P due to solder reaction-assisted crystallization of electroless Ni–P metallization in advanced packages

Ni 3 Sn 4 intermetallic was formed by the depletion of Ni from electroless Ni‐P, and a Ni 3 P layer was formed simultaneously due to solder reaction-assisted crystallization during solder reflow. Both Ni 3 Sn 4 and Ni 3 P grew rapidly due to the solder reaction-assisted crystallization and their growth was diffusion controlled during the first 15 min of annealing at 220 °C. After that, the growth rate of Ni 3 Sn 4 was greatly reduced and the crystallization of electroless Ni‐P to Ni3P was no longer induced. Based on kinetic data and scanning electron microscope morphology observations, underlying mechanisms causing this specific phenomenon are proposed. This finding is indeed very crucial since we may control the growth of Ni‐Sn intermetallics by monitoring the solder reaction-assisted crystallization of electroless Ni‐P.

[1]  Lin Kwang-Lung,et al.  WETTING BEHAVIOR BETWEEN SOLDER AND ELECTROLESS NICKEL DEPOSITS , 1994 .

[2]  Wolfgang Riedel,et al.  ELECTROLESS NICKEL PLATING , 2007 .

[3]  R. Allen,et al.  The structure of electroless NiP films as a function of composition , 1982 .

[4]  John Crank,et al.  The Mathematics Of Diffusion , 1956 .

[5]  P. Engel,et al.  Principles of electronic packaging , 1989 .

[6]  Y. C. Chan,et al.  Growth kinetic studies of Cu–Sn intermetallic compound and its effect on shear strength of LCCC SMT solder joints , 1998 .

[7]  D. R. Frear,et al.  Solder reaction-assisted crystallization of electroless Ni-P under bump metallization in low cost flip chip technology , 1999 .

[8]  M. R. Pinnel,et al.  Relative rates of nickel diffusion and copper diffusion through gold , 1977 .

[9]  Chin-An Chang,et al.  Interactions between Au and Cu across a Ni barrier layer , 1986 .

[10]  E. J. Rymaszewski,et al.  Microelectronics Packaging Handbook , 1988 .

[11]  C. MacKay,et al.  The growth of intermetallic compounds on common basis materials coated with tin and tin-lead alloys , 1976 .

[12]  King-Ning Tu,et al.  Three‐dimensional morphology of a very rough interface formed in the soldering reaction between eutectic SnPb and Cu , 1995 .

[13]  K. Tu,et al.  Direct correlation between mechanical failure and metallurgical reaction in flip chip solder joints , 1999 .

[14]  Hexing Li,et al.  Study on the crystallization process of Ni-P amorphous alloy , 1998 .

[15]  King-Ning Tu,et al.  Rate of consumption of Cu in soldering accompanied by ripening , 1995 .