Trans-scale relationship analysis between the pore structure and macro parameters of backfill and slurry

The characteristics of the porous structure of backfill are directly related to the macro parameters of the flowability of the filling slurry and the mechanical features of the backfill, which are fundamental to the study of multiscale mechanics of backfill. Based on the geometry and fractal theory, scanning electron microscopy images of backfill were analysed by image analysis methods such as OTSU and box counting. The fractal dimension of the pore structure was calculated. By quantitatively characterizing the pore structure, the trans-scale relationships between the fractal dimension of the pore structure and the macro parameters of the filling slurry were established in terms of equilibrium shear stress (ESS) and equilibrium apparent viscosity (EAV). In addition, the correlations between the fractal dimension and macro parameters of backfill were obtained in terms of uniaxial compressive strength (UCS), water content (WC) and porosity. The influence of the microstructure on the macro parameters was discussed. The results show the following: (i) the fractal dimension of the backfill pore structure can characterize the complexity of the structure; (ii) the fractal dimension of the pore structure is negatively correlated with the ESS and EAV of the filling slurry. The UCS of the backfill is positively correlated with the flowability parameter; (iii) the fractal dimension of the pore structure has a certain correlation with some macro parameters of the backfill, i.e. the fractal dimension is negatively correlated with the UCS and positively correlated with the WC and (iv) the linear correlations between the pore fractal dimension and UCS and WC are established. The correlation coefficient between the fractal dimension and UCS has an R2 value of −0.638, while the corresponding value of the fractal dimension and WC is 0.604. UCS and WC can be predicted by the fractal dimension of pores.

[1]  B. Mandelbrot.  How Long Is the Coast of Britain? Statistical Self-Similarity and Fractional Dimension , 1967, Science.

[2]  J. Raper,et al.  On techniques for the measurement of the mass fractal dimension of aggregates. , 2002, Advances in colloid and interface science.

[3]  G. Saoût,et al.  Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash , 2011 .

[4]  R. Siddique.  Properties of concrete made with volcanic ash , 2012 .

[5]  M. Johns,et al.  Pore structure in a gold mine cemented paste backfill , 2013 .

[6]  Ashish Kumar Bhandari,et al.  Modified artificial bee colony based computationally efficient multilevel thresholding for satellite image segmentation using Kapur's, Otsu and Tsallis functions , 2015, Expert Syst. Appl..

[7]  P. K. Mehta,et al.  Mechanical properties, durability, and life-cycle assessment of self-consolidating concrete mixtures made with blended portland cements containing fly ash and limestone powder , 2015 .

[8]  M. M. Aliyu,et al.  Porosity increment and strength degradation of low-porosity sedimentary rocks under different loading conditions , 2015 .

[9]  Sun Yinsen,et al.  Qualitative and Quantitative Characterization of Shale Microscopic Pore Characteristics Based on Image Analysis Technology , 2016 .

[10]  Ahmed Koubaa,et al.  Experimental investigation of mechanical and microstructural properties of cemented paste backfill containing maple-wood filler , 2016 .

[11]  J. Gregory,et al.  Fractal dimension of large aggregates under different flocculation conditions. , 2017, The Science of the total environment.

[12]  K. Zhou,et al.  Particle Flow Characteristics and Transportation Optimization of Superfine Unclassified Backfilling , 2017 .

[13]  Qingyong Zhu,et al.  STUDY ON THE PERMEABILITY OF RED SANDSTONE VIA IMAGE ENHANCEMENT , 2017 .

[14]  M. Rahman,et al.  Influence of early water exposure on modified cementitious coating , 2017 .

[15]  M. Raspanti,et al.  Scanning Electron Microscope (SEM) Evaluation of the Interface between a Nanostructured Calcium-Incorporated Dental Implant Surface and the Human Bone , 2017, Materials.

[16]  Bo Zhou,et al.  Three-dimensional sphericity, roundness and fractal dimension of sand particles , 2018 .

[17]  M. Rahman,et al.  A novel approach of introducing crystalline protection material and curing agent in fresh concrete for enhancing hydrophobicity , 2018 .

[18]  Soon-Jae Lee,et al.  Investigation of Rheological Properties of Blended Cement Pastes Using Rotational Viscometer and Dynamic Shear Rheometer , 2018 .

[19]  O. Büyüköztürk,et al.  Use of silica fume and natural volcanic ash as a replacement to Portland cement: Micro and pore structural investigation using NMR, XRD, FTIR and X-ray microtomography , 2018 .

[20]  R. Gao,et al.  Strength Characteristics and the Reaction Mechanism of Stone Powder Cement Tailings Backfill , 2018, Advances in Materials Science and Engineering.

[21]  Seongcheol Choi,et al.  Fractal Characteristics of Pore Structures in GGBFS-based Cement Pastes , 2018 .

[22]  Mazen J. Al‐Kheetan,et al.  Development of hydrophobic concrete by adding dual‐crystalline admixture at mixing stage , 2018 .

[23]  Ang Li,et al.  Investigation of the pore structures and fractal characteristics of marine shale reservoirs using NMR experiments and image analyses: A case study of the Lower Cambrian Niutitang Formation in northern Guizhou Province, South China , 2018, Marine and Petroleum Geology.

[24]  Spark testing to measure carbon content in carbon steels based on fractal box counting , 2019, Measurement.