Thermal regimes of high burn-up nuclear fuel rod

[1]  K. Une,et al.  Microstructural change and its influence on fission gas release in high burnup UO2 fuel , 1992 .

[2]  H. Matzke,et al.  On the rim effect in high burnup UO2LWR fuels , 1992 .

[3]  C. Walker,et al.  Concerning the microstructure changes that occur at the surface of UO2 pellets on irradiation to high burnup , 1992 .

[4]  Kazuhiro Nogita,et al.  Formation and growth of intragranular fission gas bubbles in UO2 fuels with burnup of 6–83 GWd/t , 1993 .

[5]  K. Une,et al.  Irradiation-induced recrystallization in high burnup UO2 fuel , 1995 .

[6]  K. Lassmann,et al.  Modelling the High Burnup UO2 Structure in LWR Fuel , 1995 .

[7]  M. Coquerelle,et al.  Detailed characterisation of the rim microstructure in PWR fuels in the burn-up range 40–67 GWd/tM , 1996 .

[8]  M. Kinoshita.  Towards the mathematical model of rim structure formation , 1997 .

[9]  H. Matzke,et al.  Formation of the rim structure in high burnup fuel , 1997 .

[10]  H. Matzke,et al.  Temperature and fission rate effects on the rim structure formation in a UO2 fuel with a burnup of 7.9% FIMA , 1998 .

[11]  Clive T. Walker,et al.  Assessment of the radial extent and completion of recrystallisation in high burn-up UO2 nuclear fuel by EPMA , 1999 .

[12]  K. Une,et al.  Heat capacity measurements on unirradiated and irradiated fuel pellets , 2001 .

[13]  K. Une,et al.  Thermal conductivities of irradiated UO2 and (U,Gd)O2 , 2001 .

[14]  Yang-Hyun Koo,et al.  Rim Characteristics and Their Effects on the Thermal Conductivity in High Burnup UO2 Fuel , 2001 .

[15]  H. Yapici,et al.  Investigation of the performance parameters and temperature distribution in fuel rod dependent on operation periods and first wall loads in fusion-fission reactor system fueled with ThO2 , 2003 .

[16]  Moustafa S El-Koliel,et al.  Modeling of WWER-440 fuel pin behavior at extended burn-up , 2004 .

[17]  C. Ronchi,et al.  Effect of burn-up on the thermal conductivity of uranium dioxide up to 100.000 MWd t−1 , 2004 .

[18]  G. Espinosa-Paredes,et al.  Simplified distributed parameters BWR dynamic model for transient and stability analysis , 2006 .

[19]  J. Park,et al.  Application of the finite volume method to the radial conduction model of the CATHENA code , 2006 .

[20]  A. Romano,et al.  Evolution of porosity in the high-burnup fuel structure , 2007 .

[21]  Renato M. Cotta,et al.  Improved lumped model for thermal analysis of high burn-up nuclear fuel rods , 2008 .

[22]  Masato Kato,et al.  Thermal conductivities of hypostoichiometric (U, Pu, Am)O2−x oxide , 2008 .

[23]  Application of the orthogonal collocation method to determination of temperature distribution in cylindrical conductors , 2008 .

[24]  G. Espinosa-Paredes,et al.  Fuel rod model based on Non-Fourier heat conduction equation , 2009 .

[25]  Nikolai A. Kudryashov,et al.  On "new travelling wave solutions" of the KdV and the KdV-Burgers equations , 2009 .

[26]  Nikolai A. Kudryashov,et al.  Be careful with the Exp-function method , 2009, 1011.4265.

[27]  Nikolai A. Kudryashov,et al.  Seven common errors in finding exact solutions of nonlinear differential equations , 2009, 1011.4268.