Exact Constraint Design of a Two-Degree of Freedom Flexure-Based Mechanism

We present the exact constraint design of a two degrees of freedom cross-flexure-based stage that combines a large workspace to footprint ratio with high vibration mode frequencies. To maximize unwanted vibration mode frequencies the mechanism is an assembly of optimized parts. To ensure a deterministic behavior the assembled mechanism is made exactly constrained. We analyze the kinematics of the mechanism using three methods; Grublers criterion, opening the kinematic loops, and with a multibody singular value decomposition method. Nine release-flexures are implemented to obtain an exact constraint design. Measurements of the actuation force and natural frequency show no bifurcation, and load stiffening is minimized, even though there are various errors causing nonlinearity. Misalignment of the exact constraint designs does not lead to large stress, it does however decrease the support stiffness significantly. We conclude that designing an assembled mechanism in an exactly constrained manner leads to predictable stiffnesses and modal frequencies

[1]  Ronald G.K.M. Aarts,et al.  Large stroke performance optimization of spatial flexure hinges , 2012 .

[2]  Kee S. Moon,et al.  Optimal design of a flexure hinge based XYφ wafer stage , 1997 .

[3]  L. Rubin,et al.  Instruments and Experiences: Papers on Measurement and Instrument Design , 1988 .

[4]  John A. Nelder,et al.  A Simplex Method for Function Minimization , 1965, Comput. J..

[5]  Ronald G.K.M. Aarts,et al.  Flexible multibody modelling for exact constraint design of compliant mechanisms , 2012 .

[6]  Simon Henein,et al.  FLEXURE PIVOT FOR AEROSPACE MECHANISMS , 2007 .

[7]  J. Maxwell,et al.  The Scientific Papers of James Clerk Maxwell: On the Calculation of the Equilibrium and Stiffness of Frames , 1864 .

[8]  Dannis Michel Brouwer,et al.  Analytical and experimental investigation of a parallel leaf spring guidance , 2009 .

[9]  Martin L. Culpepper,et al.  Design of a low-cost nano-manipulator which utilizes a monolithic, spatial compliant mechanism , 2004 .

[10]  J. Angeles,et al.  DETERMINATION DU DEGRE DE LIBERTE DES CHAINES CINEMATIQUE , 1988 .

[11]  M Maarten Steinbuch,et al.  Design of a long stroke translation stage for AFM , 2010 .

[12]  Saša Zelenika,et al.  Analytical and experimental characterisation of high-precision flexural pivots subjected to lateral loads , 2002 .

[13]  J. A. Haringx.  The cross-spring pivot as a constructional element , 1949 .

[14]  Ronald G.K.M. Aarts,et al.  Modal measurements and model corrections of a large stroke compliant mechanism , 2013 .

[15]  R V Jones.  LABORATORY AND WORKSHOP NOTES: A parallel-spring cross-movement for an optical bench , 1956 .

[16]  J. M. Paros,et al.  Flexure Pivots to Replace Knife Edge and Ball Bearing , 1965 .

[17]  Dannis Michel Brouwer,et al.  Large deflection stiffness analysis of parallel prismatic leaf-spring flexures taking into account shearing, constrained warping and anticlastic curving effects , 2013 .

[18]  Layton Carter Hale,et al.  Principles and Techniques for Designing Precision Machines , 2013 .

[19]  S. Pellegrino,et al.  Matrix analysis of statically and kinematically indeterminate frameworks , 1986 .

[20]  Herman Soemers,et al.  Design principles for precision mechanisms , 2011 .

[21]  Stuart T. Smith,et al.  Flexures: Elements of Elastic Mechanisms , 2000 .

[22]  Jonathan B. Hopkins,et al.  Corrigendum to Synthesis of multi-degree of freedom, parallel flexure system concepts via Freedom and Constraint Topology (FACT)—Part I: Principles , 2010 .

[23]  Placid Mathew Ferreira,et al.  Design analysis, fabrication and testing of a parallel-kinematic micropositioning XY stage , 2007 .

[24]  Shorya Awtar,et al.  Elastic Averaging in Flexure Mechanisms: A Three-Beam Parallelogram Flexure Case Study , 2006 .

[25]  Dannis Michel Brouwer,et al.  A 2-DOF Large Stroke Flexure Based Positioning Mechanism , 2012 .

[26]  Gijs J M Krijnen,et al.  Design and Fabrication of a Planar Three-DOFs MEMS-Based Manipulator , 2010, Journal of Microelectromechanical Systems.

[27]  J. Paros.  How to design flexure hinges , 1965 .

[28]  W. T. Koiter,et al.  Trends in solid mechanics 1979 : proceedings of the symposium dedicated to the 65th birthday of W.T. Koiter, Delft University of Technology, June 13-15, 1979 , 1979 .

[29]  Ronald G.K.M. Aarts,et al.  Multibody modelling and optimization of a curved hinge flexure , 2010 .

[30]  Ronald G.K.M. Aarts,et al.  Optimization of release locations for small self-stress large stiffness flexure mechanisms , 2013 .

[31]  Jonathan B. Hopkins,et al.  Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT). Part II: Practice , 2010 .

[32]  J. Van Eijk,et al.  On the design of plate-spring mechanisms , 1985 .

[33]  Shorya Awtar,et al.  Constraint-based design of parallel kinematic XY flexure mechanisms , 2007 .