A robust hybrid multilevel rectifier with adjustable output voltage and variable load

In order to obtain synergic benefits by using two different semiconductors such as thyristors and IGBTs, hybrid multilevel converters have been studied recently in the literature. In a grid connected application, unity power factor (PF) control and load voltage control should be achieved. The proposed hybrid multilevel rectifier consists of a main neutral point clamped (NPC) and cell cascaded H-bridges (CHB). Each CHB has a floating capacitor. Therefore, in order to reduce costs, the system regulates the floating capacitor voltages without using independent DC power sources. Additionally, a control strategy concerning the voltage unbalance problem on the main NPC is also considered. Under load resistance changes, the hybrid multilevel rectifier accomplishes unity PF and load voltage control as well as the regulation of CHB capacitor voltages. Experimental results combining all mentioned technologies show verification of the robust hybrid multilevel rectifier in a grid connected application.

[1]  Mehdi Ferdowsi,et al.  Fault recovery strategy for hybrid cascaded H-bridge multi-level inverters , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[2]  Pericle Zanchetta,et al.  Predictive Current Control for Multilevel Active Rectifiers With Reduced Switching Frequency , 2008, IEEE Transactions on Industrial Electronics.

[3]  Jean-Claude Vannier,et al.  Flying capacitor multilevel inverters and DTC motor drive applications , 2002, IEEE Trans. Ind. Electron..

[4]  Pablo Lezana,et al.  Implementation and Control of a Hybrid Multilevel Converter With Floating DC Links for Current Waveform Improvement , 2011, IEEE Transactions on Industrial Electronics.

[5]  S. Mariethoz,et al.  Systematic Design of High-Performance Hybrid Cascaded Multilevel Inverters With Active Voltage Balance and Minimum Switching Losses , 2013, IEEE Transactions on Power Electronics.

[6]  Saad Mekhilef,et al.  Voltage Vector Approximation Control of Multistage—Multilevel Inverter Using Simplified Logic Implementation , 2011, IEEE Transactions on Industrial Informatics.

[7]  Jinjun Liu,et al.  A Novel DC Voltage Control Method for STATCOM Based on Hybrid Multilevel H-Bridge Converter , 2013, IEEE Transactions on Power Electronics.

[8]  S. Fukuda,et al.  Control Strategies of a Hybrid Multilevel Converter for Expanding Adjustable Output Voltage Range , 2007, 2007 7th International Conference on Power Electronics and Drive Systems.

[9]  Alex Q. Huang,et al.  Current Sensorless Power Balance Strategy for DC/DC Converters in a Cascaded Multilevel Converter Based Solid State Transformer , 2014, IEEE Transactions on Power Electronics.

[10]  Juan Dixon,et al.  Cascaded Multilevel Converters: Optimal Asymmetries and Floating Capacitor Control , 2013, IEEE Transactions on Industrial Electronics.

[11]  Thomas A. Lipo,et al.  A hybrid multilevel inverter topology for drive applications , 1998, APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition.

[12]  Fang Zheng Peng,et al.  Cascade multilevel inverters for utility applications , 1997, Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066).

[13]  Hirofumi Akagi,et al.  A New Neutral-Point-Clamped PWM Inverter , 1981, IEEE Transactions on Industry Applications.

[14]  C. Rech,et al.  Impact of Hybrid Multilevel Modulation Strategies on Input and Output Harmonic Performances , 2007, IEEE Transactions on Power Electronics.

[15]  A Ghosh,et al.  A Hybrid Cascade Converter Topology With Series-Connected Symmetrical and Asymmetrical Diode-Clamped H-Bridge Cells , 2009, IEEE Transactions on Power Electronics.

[16]  Mehdi Ferdowsi,et al.  Capacitor Voltage Regulation in Single-DC-Source Cascaded H-Bridge Multilevel Converters Using Phase-Shift Modulation , 2013, IEEE Transactions on Industrial Electronics.

[17]  Ji-Yoon Yoo,et al.  Practical Implementation of PWM Synchronization and Phase-Shift Method for Cascaded H-Bridge Multilevel Inverters Based on a Standard Serial Communication Protocol , 2008, IEEE Transactions on Industry Applications.

[18]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[19]  T. Lipo,et al.  Hybrid multilevel power conversion system: a competitive solution for high power applications , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[20]  Ghias Farivar,et al.  A voltage balancing strategy with extended operating region for cascaded H-bridge converters , 2014, IEEE Transactions on Power Electronics.

[21]  Fang Zheng Peng,et al.  Multilevel inverters: a survey of topologies, controls, and applications , 2002, IEEE Trans. Ind. Electron..