On the tribo-dynamic behaviors during start-up of water lubricated bearing considering imperfect journal

[1]  Wei-dong Zhu,et al.  Theoretical and experimental exploration on the micro asperity contact load ratios and lubrication regimes transition for water-lubricated stern tube bearing , 2021 .

[2]  Jiaxu Wang,et al.  Dynamic Mixed Lubrication Investigation of Water-Lubricated Bearing With Unbalanced Rotor During Start-Up , 2021 .

[3]  Georg Jacobs,et al.  Numerical prediction of the frictional losses in sliding bearings during start-stop operation , 2020, Friction.

[4]  Guo Xiang,et al.  Study on the tribo-dynamic performances of water-lubricated microgroove bearings during start-up , 2020 .

[5]  T. He,et al.  Transient tribo-dynamic model for journal bearings during start-up considering 3D thermal characteristic , 2020 .

[6]  Ming Li,et al.  Effects on lubrication characteristics of water-lubricated rubber bearings with journal tilting and surface roughness , 2020, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

[7]  Zhenzhong Su,et al.  Effects of Shaft Shape Errors on the Dynamic Characteristics of a Rotor-Bearing System , 2019, Journal of Tribology.

[8]  Jiaxu Wang,et al.  Coupling transient mixed lubrication and wear for journal bearing modeling , 2019, Tribology International.

[9]  V. Lavrinenko,et al.  The Influence of Circumferential Waviness of the Diamond Wheel Working Surface on the Machined Surface Roughness , 2019, Journal of Superhard Materials.

[10]  C. Papadopoulos,et al.  Effect of manufacturing errors of the pad sliding surface on the performance of the hydrodynamic thrust bearing , 2019, Tribology International.

[11]  Liqin Wang,et al.  The effects of surface roughness on the transient characteristics of hydrodynamic cylindrical bearings during startup , 2018, Tribology International.

[12]  D. Sander,et al.  Starting and stopping behavior of worn journal bearings , 2018, Tribology International.

[13]  Liqin Wang,et al.  Numerical analysis on the dynamic contact behavior of hydrodynamic journal bearings during start-up , 2018 .

[14]  M. Fillon,et al.  Transient Pressure and Temperature Field Measurements in a Lightly Loaded Circumferential Groove Journal Bearing from Startup to Steady-State Thermal Stabilization , 2017 .

[15]  Satish C. Sharma,et al.  Effect of geometrical irregularities on the performance of a misaligned hybrid journal bearing compensated with membrane restrictor , 2017 .

[16]  Wei Wang,et al.  Effects of manufacturing errors on the static characteristics of aerostatic journal bearings with porous restrictor , 2017 .

[17]  Minseok Song,et al.  Effect of shape errors on the stability of externally pressurized air journal bearings using semi-implicit scheme , 2017 .

[18]  Zhike Peng,et al.  Effects of journal rotation and surface waviness on the dynamic performance of aerostatic journal bearings , 2017 .

[19]  Miroslav Byrtus,et al.  Investigation of bearing clearance effects in dynamics of turbochargers , 2017 .

[20]  N. Merah,et al.  UHMWPE Hybrid Nanocomposites for Improved Tribological Performance Under Dry and Water-Lubricated Sliding Conditions , 2017, Tribology Letters.

[21]  Zhike Peng,et al.  Effect of surface waviness on the static performance of aerostatic journal bearings , 2016 .

[22]  Satish C. Sharma,et al.  Combined influence of geometric imperfections and misalignment of journal on the performance of four pocket hybrid journal bearing , 2016 .

[23]  Yinbiao Guo,et al.  Investigation of waviness error in surface grinding of large axisymmetric aspheric lenses , 2016 .

[24]  M. Khonsari,et al.  An engineering approach for the prediction of wear in mixed lubricated contacts , 2013 .

[25]  Yang Hyup Ha,et al.  A Study on the Influence of Waviness Error to a Hydrostatic Bearing for a Crankshaft Pin Turner , 2013 .

[26]  Sergei Glavatskih,et al.  A comparative linear and nonlinear dynamic analysis of compliant cylindrical journal bearings , 2013 .

[27]  Satish C. Sharma,et al.  Effect of geometric imperfections of journal on the performance of micropolar lubricated 4-pocket hybrid journal bearing , 2013 .

[28]  Michel Fillon,et al.  Experimental measurement of the friction torque on hydrodynamic plain journal bearings during start-up , 2011 .

[29]  P. Nikolakopoulos,et al.  Elastohydrodynamic analysis and Pareto optimization of intact, worn and misaligned journal bearings , 2011 .

[30]  Harish Hirani,et al.  Tribological study of elastomeric bearings for marine propeller shaft system , 2009 .

[31]  C. A. Papadopoulos,et al.  A study of friction in worn misaligned journal bearings under severe hydrodynamic lubrication , 2008 .

[32]  Michel Fillon,et al.  On the Significance of Thermal and Deformation Effects on a Plain Journal Bearing Subjected to Severe Operating Conditions , 2004 .

[33]  Izhak Etsion,et al.  A Finite Element Based Elastic-Plastic Model for the Contact of Rough Surfaces , 2003 .

[34]  Michel Fillon,et al.  An Experimental Analysis of Misalignment Effects on Hydrodynamic Plain Journal Bearing Performances , 2002 .

[35]  Michel Fillon,et al.  Transient Thermoelastohydrodynamic Analysis for Safe Operating Conditions of a Tilting-pad Journal Bearing During Start-up , 2000 .

[36]  W. Woodward,et al.  Contact stresses for closely conforming bodies--application to cylinders and spheres , 1976 .

[37]  M. M. Khonsari,et al.  Proper film thickness key to bearing survival , 2006 .

[38]  S. K. Guha,et al.  Analysis of steady-state characteristics of misaligned hydrodynamic journal bearings with isotropic roughness effect , 2000 .

[39]  H. Cheng,et al.  An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication , 1978 .