Effects of cathode flow fields on direct methanol fuel cell-simulation study

Flow-field design of direct methanol fuel cell (DMFCs) plays an important role affecting the cell performance. Previous studies suggest that the combination of anode parallel flow field and cathode serpentine flow-field present the best and stable performance. Among these, cathode flow-field holds higher influence than that of anode. However, more detailed experiments needed to be done to find out the reasons. In this study, CFDRC half-cell models are adopted to simulate the flow phenomena within serpentine, parallel and grid flow field. We find that gas is well distributed within serpentine flow field while barren region are observed within parallel flow field. These factors contribute to the cell performance greatly. In addition, the durability test of DMFCs using parallel flow field is improved when the flow rate is increased or the current is uphold at inferior, so the barren region maintained at an acceptable level.

[1]  Chao-Yang Wang,et al.  Mathematical Modeling of Liquid-Feed Direct Methanol Fuel Cells , 2003 .

[2]  Kai Sundmacher,et al.  Limiting current behaviour of the direct methanol fuel cell , 1999 .

[3]  C. Pu,et al.  Carbon supported and unsupported Pt–Ru anodes for liquid feed direct methanol fuel cells , 1998 .

[4]  Xianguo Li,et al.  Modelling of polymer electrolyte membrane fuel cells with variable degrees of water flooding , 2000 .

[5]  K. Kreuer.  On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells , 2001 .

[6]  Antonino S. Aricò,et al.  Influence of flow field design on the performance of a direct methanol fuel cell , 2000 .

[7]  Tianshou Zhao,et al.  Effect of anode flow field design on the performance of liquid feed direct methanol fuel cells , 2005 .

[8]  Shimshon Gottesfeld,et al.  Electro-osmotic Drag of Water in Poly(perfluorosulfonic acid) Membranes , 2001 .

[9]  Trung Van Nguyen,et al.  A Gas Distributor Design for Proton‐Exchange‐Membrane Fuel Cells , 1996 .

[10]  W. Vielstich,et al.  Investigation of methanol crossover and single electrode performance during PEMDMFC operation: A study using a solid polymer electrolyte membrane fuel cell system , 1998 .

[11]  Karl V. Kordesch,et al.  Fuel cells and their applications , 1996 .

[12]  Qiang Ye,et al.  In situ visualization study of CO2 gas bubble behavior in DMFC anode flow fields , 2005 .

[13]  Angelika Heinzel,et al.  A review of the state-of-the-art of the methanol crossover in direct methanol fuel cells , 1999 .

[14]  Keith Scott,et al.  Carbon dioxide evolution patterns in direct methanol fuel cells , 1999 .

[15]  T. Nguyen,et al.  Multicomponent transport in porous electrodes of proton exchange membrane fuel cells using the interdigitated gas distributors , 1999 .

[16]  Christopher Hebling,et al.  A polymer electrolyte membrane fuel cell system for powering portable computers , 2003 .

[17]  K. Friedrich,et al.  Transport properties of ionomer composite membranes for direct methanol fuel cells , 2002 .

[18]  T. Nguyen,et al.  Effect of direct liquid water injection and interdigitated flow field on the performance of proton exchange membrane fuel cells , 1998 .

[19]  Keith Scott,et al.  Electrochemical and gas evolution characteristics of direct methanol fuel cells with stainless steel mesh flow beds , 2001 .

[20]  Frano Barbir,et al.  An Analytical Solution of a Half‐Cell Model for PEM Fuel Cells , 2000 .

[21]  Falin Chen,et al.  Effects of porosity change of gas diffuser on performance of proton exchange membrane fuel cell , 2003 .

[22]  Keith Scott,et al.  Engineering aspects of the direct methanol fuel cell system , 1999 .

[23]  C. Hebling,et al.  Visualization of water buildup in the cathode of a transparent PEM fuel cell , 2003 .

[24]  M. S. Hegde,et al.  An XPS study on binary and ternary alloys of transition metals with platinized carbon and its bearing upon oxygen electroreduction in direct methanol fuel cells , 2001 .

[25]  Keith Scott,et al.  The degree and effect of methanol crossover in the direct methanol fuel cell , 1998 .