Optimizing the structure of layered cathode material for higher electrochemical performance by elucidating structural evolution during heat processing
暂无分享,去创建一个
F. Pan | Wenguang Zhao | M. Avdeev | Zhongyuan Huang | W. Kan | Yinguo Xiao | Mihai Chu | Rui Wang | Chaoqi Wang | Weiming Zhu | Lunhua He | Jie Chen | S. Deng | Yanjun Zhang | Longwei Mei
[1] Tongchao Liu,et al. Tuning Li-enrichment in high-Ni layered oxide cathodes to optimize electrochemical performance for Li-ion battery , 2019, Nano Energy.
[2] L. Zan,et al. Enhanced electrochemical performances of Li2MnO3 cathode materials via adjusting oxygen vacancies content for lithium-ion batteries , 2019, Applied Surface Science.
[3] Tongchao Liu,et al. Ni/Li Disordering in Layered Transition Metal Oxide: Electrochemical Impact, Origin, and Control. , 2019, Accounts of chemical research.
[4] Xin Liu,et al. In-situ thermal annealing Pt/Ti interphase layers for epitaxial growth of improved Li(Ni0.5Mn0.3Co0.2)O2 solid thin-film cathodes , 2019, Nano Energy.
[5] Xiao‐Qing Yang,et al. Review of Recent Development of In Situ/Operando Characterization Techniques for Lithium Battery Research , 2019, Advanced materials.
[6] F. Pan,et al. Insights into the structural evolution and Li/O loss in high-Ni layered oxide cathodes , 2019, Nano Energy.
[7] Hongyuan Zhao,et al. Dual functions of gradient phosphate polyanion doping on improving the electrochemical performance of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode at high cut-off voltage and high temperature , 2019, Electrochimica Acta.
[8] Zonghai Chen,et al. Intrinsic Role of Cationic Substitution in Tuning Li/Ni Mixing in High-Ni Layered Oxides , 2019, Chemistry of Materials.
[9] Qiaobao Zhang,et al. Enhanced Electrochemical Performance of Li-Rich Layered Cathode Materials by Combined Cr Doping and LiAlO2 Coating , 2019, ACS Sustainable Chemistry & Engineering.
[10] Luyi Yang,et al. Insights into Li/Ni ordering and surface reconstruction during synthesis of Ni-rich layered oxides , 2019, Journal of Materials Chemistry A.
[11] Ji‐Guang Zhang,et al. Effect of calcination temperature on the electrochemical properties of nickel-rich LiNi0.76Mn0.14Co0.10O2 cathodes for lithium-ion batteries , 2018, Nano Energy.
[12] Tongchao Liu,et al. Insight into the origin of lithium/nickel ions exchange in layered Li(NixMnyCoz)O2 cathode materials , 2018, Nano Energy.
[13] Ya‐Xia Yin,et al. High‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries , 2018, Advanced materials.
[14] Jie Chen,et al. The general purpose powder diffractometer at CSNS , 2017, Physica B: Condensed Matter.
[15] L. Arnberg,et al. In operando neutron diffraction study of a commercial graphite/(Ni, Mn, Co) oxide-based multi-component lithium ion battery , 2016 .
[16] J. Dahn,et al. A study of methyl phenyl carbonate and diphenyl carbonate as electrolyte additives for high voltage LiNi 0.8 Mn 0.1 Co 0.1 O 2 /graphite pouch cells , 2016 .
[17] Seung‐Taek Myung,et al. Re-heating effect of Ni-rich cathode material on structure and electrochemical properties , 2016 .
[18] A. Manthiram,et al. Exploration of a Metastable Normal Spinel Phase Diagram for the Quaternary Li–Ni–Mn–Co–O System , 2016 .
[19] A. Manthiram,et al. Low-Temperature Synthesis, Structural Characterization, and Electrochemistry of Ni-Rich Spinel-like LiNi2–yMnyO4 (0.4 ≤ y ≤ 1) , 2015 .
[20] Xiqian Yu,et al. Structural changes and thermal stability of charged LiNixMnyCozO₂ cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy. , 2014, ACS applied materials & interfaces.
[21] Xiao‐Qing Yang,et al. In situ soft XAS study on nickel-based layered cathode material at elevated temperatures: A novel approach to study thermal stability , 2014, Scientific Reports.
[22] Zonghai Chen,et al. Probing thermally induced decomposition of delithiated Li(1.2-x)Ni(0.15)Mn(0.55)Co(0.1)O2 by in situ high-energy X-ray diffraction. , 2014, ACS applied materials & interfaces.
[23] M. Yoshikawa,et al. Evaluation of thermal stability in Li0.2NixMn(1−x)/2Co(1−x)/2O2 (x = 1/3, 0.6, and 0.8) through X-ray absorption fine structure , 2014 .
[24] Xiqian Yu,et al. Oxygen-Release-Related Thermal Stability and Decomposition Pathways of LixNi0.5Mn1.5O4 Cathode Materials , 2014 .
[25] Yun Jung Lee,et al. Cobalt-free nickel rich layered oxide cathodes for lithium-ion batteries. , 2013, ACS applied materials & interfaces.
[26] Lijun Wu,et al. Combining In Situ Synchrotron X‐Ray Diffraction and Absorption Techniques with Transmission Electron Microscopy to Study the Origin of Thermal Instability in Overcharged Cathode Materials for Lithium‐Ion Batteries , 2013 .
[27] John B Goodenough,et al. The Li-ion rechargeable battery: a perspective. , 2013, Journal of the American Chemical Society.
[28] Doron Aurbach,et al. Challenges in the development of advanced Li-ion batteries: a review , 2011 .
[29] M. Yoshikawa,et al. Thermal stability of Li1−yNixMn(1−x)/2Co(1−x)/2O2 layer-structured cathode materials used in Li-Ion batteries , 2011 .
[30] D. Kil,et al. Crystallinity enhancement of flame-made LiCo0.25Ni0.75O2 nanoparticles by heat-treatment , 2011 .
[31] S. Lee,et al. Thermal studies of charged cathode material (LixCoO2) with temperature-programmed decomposition–mass spectrometry , 2010 .
[32] J. Goodenough,et al. Challenges for Rechargeable Li Batteries , 2010 .
[33] Xuejie Huang,et al. Research on Advanced Materials for Li‐ion Batteries , 2009 .
[34] Y. Shao-horn,et al. Thermal Instability of Cycled Li x Ni 0.5 Mn 0.5 O 2 Electrodes: An in Situ Synchrotron X-ray Powder Diffraction Study , 2008 .
[35] M. Armand,et al. Building better batteries , 2008, Nature.
[36] Hailei Zhao,et al. Synthesis and electrochemical characterization of layered Li(Ni1/3Co1/3Mn1/3)O2 cathode materials by low-temperature solid-state reaction , 2008 .
[37] Xiao‐Qing Yang,et al. Time-Resolved XRD Study on the Thermal Decomposition of Li[sub 1−x]Ni[sub 0.8]Co[sub 0.15]Al[sub 0.05]O[sub 2] Cathode Materials for Li-Ion Batteries , 2005 .
[38] Juan Rodríguez-Carvajal,et al. Recent advances in magnetic structure determination by neutron powder diffraction , 1993 .
[39] Mengyun Nie,et al. The Impact of Electrolyte Additives and Upper Cut-off Voltage on the Formation of a Rocksalt Surface Layer in LiNi0.8Mn0.1Co0.1O2 Electrodes , 2017 .