High power output from body heat harvesting based on flexible thermoelectric system with low thermal contact resistance

This paper reports body heat harvesting and refrigeration effects based on a flexible thermoelectric (TE) system made of rigid inorganic bulk materials. The TE device itself is integrated with small segments that consist of Bakelite holders containing the inorganic bulk TE elements. These holders are connected by wires passing through holes at each side of the holders. Owing to its structural design, the wearable TE system shows enough flexibility to be used on curved or nonflat surfaces such as human skin. Powered by a portable battery, it performs refrigeration on human skin and is embedded in an arm band. It refrigerates human skin at approximately 4.4 K, which is cold enough for humans, based on a theoretical analysis. A wearable TE system was also attached to human skin for power generation. It produces 138.67 μW of power with an 8.8 mV voltage output. Considering the size of the system, 55 mm by 45 mm, it records a 5.6 μW cm−2 power density based on body heat harvesting. From the theoretical analysis based on human thermoregulatory modeling, the refrigeration and power generation performance can be further enhanced by reducing the thermal contact resistance. The TE system shows potential for use as a body heat harvester or human body refrigerator.

[1]  Toan Nguyen Van,et al.  Flexible thermoelectric power generator with Y-type structure using electrochemical deposition process , 2018 .

[2]  Bill J. Van Heyst,et al.  Thermal energy harvesting from the human body using flexible thermoelectric generator (FTEG) fabricated by a dispenser printing technique , 2016 .

[3]  G. J. Snyder,et al.  Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics , 2015, Science.

[4]  Jin Young Oh,et al.  Chemically exfoliated transition metal dichalcogenide nanosheet-based wearable thermoelectric generators , 2016 .

[5]  M. Kanatzidis,et al.  Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals , 2014, Nature.

[6]  Tong Lin,et al.  Thermoelectric Fabrics: Toward Power Generating Clothing , 2015, Scientific Reports.

[7]  Bill J. Van Heyst,et al.  A review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges , 2017 .

[8]  Zichen Chen,et al.  Wearable thermoelectric generator for harvesting heat on the curved human wrist , 2017 .

[9]  Hwanjoo Park,et al.  Mat-like flexible thermoelectric system based on rigid inorganic bulk materials , 2017 .

[10]  Kevin C. See,et al.  Water-processable polymer-nanocrystal hybrids for thermoelectrics. , 2010, Nano letters.

[11]  H. Anno,et al.  Thermoelectric Properties and Thermal Stability of PEDOT:PSS Films on a Polyimide Substrate and Application in Flexible Energy Conversion Devices , 2014, Journal of Electronic Materials.

[12]  C. Van Hoof,et al.  Thermoelectric Converters of Human Warmth for Self-Powered Wireless Sensor Nodes , 2007, IEEE Sensors Journal.

[13]  Joseph Richardson,et al.  High-performance and flexible thermoelectric films by screen printing solution-processed nanoplate crystals , 2016, Scientific Reports.

[14]  Vladimir Leonov,et al.  Thermoelectric Energy Harvesting of Human Body Heat for Wearable Sensors , 2013, IEEE Sensors Journal.

[15]  Hyeung-Sik Choi,et al.  Development of a temperature-controlled car-seat system utilizing thermoelectric device , 2007 .

[16]  W. Xu,et al.  Organic Thermoelectric Materials: Emerging Green Energy Materials Converting Heat to Electricity Directly and Efficiently , 2014, Advanced materials.

[17]  H. H. Pennes.  Analysis of tissue and arterial blood temperatures in the resting human forearm. , 1948, Journal of applied physiology.

[18]  N. Ghaddar,et al.  A new transient bioheat model of the human body and its integration to clothing models , 2007 .

[19]  William J. Potscavage,et al.  Processing and doping of thick polymer active layers for flexible organic thermoelectric modules , 2016 .

[20]  Chris Van Hoof,et al.  Realization of a wearable miniaturized thermoelectric generator for human body applications , 2009 .

[21]  Elena Nicolescu Veety,et al.  Wearable thermoelectric generators for human body heat harvesting , 2016 .

[22]  J. Bahk,et al.  Flexible thermoelectric materials and device optimization for wearable energy harvesting , 2015 .

[23]  D. Astrain,et al.  Increase of COP in the thermoelectric refrigeration by the optimization of heat dissipation , 2003 .

[24]  Dimuthu Wijethunge,et al.  Simplified human thermoregulatory model for designing wearable thermoelectric devices , 2018 .

[25]  Sean Li,et al.  A solution-processed TiS2/organic hybrid superlattice film towards flexible thermoelectric devices , 2017 .

[26]  Ali Shakouri,et al.  Cost-efficiency trade-off and the design of thermoelectric power generators. , 2011, Environmental science & technology.

[27]  B. Cho,et al.  A wearable thermoelectric generator fabricated on a glass fabric , 2014 .

[28]  Luca Benini,et al.  Human body heat for powering wearable devices: From thermal energy to application , 2017 .

[29]  Max Shtein,et al.  Fiber-based flexible thermoelectric power generator , 2008 .

[30]  L. M. Woods,et al.  A synthetic approach for enhanced thermoelectric properties of PEDOT:PSS bulk composites , 2015 .

[31]  Jingkun Xu,et al.  Use of organic solvent-assisted exfoliated MoS2 for optimizing the thermoelectric performance of flexible PEDOT:PSS thin films , 2016 .

[32]  Choongho Yu,et al.  Improved thermoelectric behavior of nanotube-filled polymer composites with poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate). , 2010, ACS nano.

[33]  F. Ren,et al.  Development of Thermoelectric Fibers for Miniature Thermoelectric Devices , 2016, Journal of Electronic Materials.

[34]  Luca Francioso,et al.  Flexible thermoelectric generator for ambient assisted living wearable biometric sensors , 2011 .

[35]  M. Naftaly,et al.  Metrology Issues and Solutions in THz Time-Domain Spectroscopy: Noise, Errors, Calibration , 2013, IEEE Sensors Journal.

[36]  Gao Min,et al.  Experimental evaluation of prototype thermoelectric domestic-refrigerators , 2006 .

[37]  X. Crispin,et al.  Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene). , 2011, Nature materials.

[38]  Lianjun Wang,et al.  Preparation of bulk AgNWs/PEDOT:PSS composites: a new model towards high-performance bulk organic thermoelectric materials , 2015 .

[39]  Byung Jin Cho,et al.  Structural design of a flexible thermoelectric power generator for wearable applications , 2018 .

[40]  Saffa Riffat,et al.  Comparative investigation of thermoelectric air-conditioners versus vapour compression and absorption air-conditioners , 2004 .

[41]  R. Vullers,et al.  Wearable Thermoelectric Generators for Body-Powered Devices , 2009 .

[42]  F. S. Kim,et al.  Effects of one- and two-dimensional carbon hybridization of PEDOT:PSS on the power factor of polymer thermoelectric energy conversion devices , 2015 .

[43]  Byung Jin Cho,et al.  Hybrid composite of screen-printed inorganic thermoelectric film and organic conducting polymer for flexible thermoelectric power generator , 2014 .

[44]  C. Huizenga,et al.  Thermal sensation and comfort in transient non-uniform thermal environments , 2004, European Journal of Applied Physiology.

[45]  Takeshi Saito,et al.  From materials to device design of a thermoelectric fabric for wearable energy harvesters , 2017 .

[46]  Alic Chen,et al.  Printed Se-Doped MA n-Type Bi2Te3 Thick-Film Thermoelectric Generators , 2012, Journal of Electronic Materials.

[47]  Mario Leclerc,et al.  Conducting polymers: Efficient thermoelectric materials , 2011 .

[48]  Lingai Luo,et al.  An experimental and numerical study of a thermoelectric air-cooling and air-heating system , 2008 .