Heat, vapor, and CO2 transportation caused by airflow in high-rise residential buildings

Abstract Vertical and horizontal airflow occurs in high-rise buildings caused by wind pressure and temperature differences (thermal buoyancy), and heat, water vapor, and contaminants are transported along the air movement in high-rise buildings. To characterize transportation of the heat, water vapor, and contaminants with the airflow in a high-rise building, long-term measurements were taken in a high-rise residential building in Seoul, Korea, during the winter season. The analyzed building has 31 floors above ground and 5 floors underground and the height is approximately 110 m. The temperature, water vapor, and CO2 levels were measured at the elevator hall of the 7th floor, 13th floor, and 29th floor of the analyzed building. The measurement results indicated that the concentrations of heat, humidity, and contaminants (CO2) on the upper floors were all high compared to the lower floors because the outdoor air flows into the lower floors, moves upward through vertical shafts, such as the elevator core and staircases, and flows into the upper floors. This is due to the movement of heat, water vapor, and contaminants along the vertical air movement in high-rise buildings. In addition, the concentrations of heat, humidity, and CO2 in the high-rise residential building were the highest at the neutral pressure level (NPL, 13th floor) of the analyzed building. This is attributed to the poor ventilation performance at the NPL in high-rise buildings. As a result, the people who live on upper floors could be exposed to higher temperatures, humidity, and contaminants compared to those living on the lower floors in high-rise residential buildings.

[1]  Hiroshi Yoshino,et al.  The effect of the wind speed velocity on the stack pressure in medium-rise buildings in cold region of China , 2007 .

[2]  Myoung-Souk Yeo,et al.  Characteristics of pressure distribution and solution to the problems caused by stack effect in high-rise residential buildings , 2007 .

[3]  Jinkyun Cho,et al.  The predictions of infection risk of indoor airborne transmission of diseases in high-rise hospitals: Tracer gas simulation , 2010 .

[4]  Steven J. Emmerich,et al.  Multizone airflow models for calculating infiltration rates in commercial reference buildings , 2013 .

[5]  Stefano Cammelli,et al.  Stack Effect in High-Rise Buildings: A Review , 2016 .

[6]  Hyunwoo Lim,et al.  Application of the mechanical ventilation in elevator shaft space to mitigate stack effect under operation stage in high-rise buildings , 2014 .

[7]  S J Emmerich,et al.  Modeled infiltration rate distributions for U.S. housing. , 2010, Indoor air.

[8]  S. Lee,et al.  Indoor and outdoor air quality investigation at six residential buildings in Hong Kong , 1999 .

[9]  Doosam Song,et al.  Quantitative Reduction Method of Draft in High-Rise Buildings, Using Revolving Doors , 2012 .

[10]  W. Z. Black,et al.  Smoke movement in elevator shafts during a high-rise structural fire , 2009 .

[11]  H Ck Hung,et al.  Industrial experience and research into the causes of SARS virus transmission in a high-rise residential housing estate in Hong Kong , 2006 .

[12]  Andrew K. Persily,et al.  Energy Impacts of Infiltration and Ventilation in U.S. Office Buildings Using Multizone Airflow Simulation | NIST , 1999 .

[13]  Doosam Song,et al.  A study on the development and application of the E/V shaft cooling system to reduce stack effect in high-rise buildings , 2010 .

[14]  R. Diamond,et al.  Air flow distribution in a high-rise residential building , 1998 .

[15]  Doosam Song,et al.  A calibration method for whole-building airflow simulation in high-rise residential buildings , 2015 .

[16]  J. P. Holman,et al.  Experimental methods for engineers , 1971 .

[17]  G. T. Tamura,et al.  Studies on exterior wall air tightness and air infiltration of tall buildings , 1976 .

[18]  Y. Li,et al.  Multi-zone modeling of probable SARS virus transmission by airflow between flats in Block E, Amoy Gardens. , 2005, Indoor air.

[19]  Sungmin Yoon,et al.  Stack-driven infiltration and heating load differences by floor in high-rise residential buildings , 2019, Building and Environment.

[20]  Tao Lu,et al.  A novel methodology for estimating space air change rates and occupant CO2 generation rates from measurements in mechanically-ventilated buildings , 2010 .

[21]  George T. Tamura,et al.  Smoke movement and control in high-rise buildings , 1994 .

[22]  M. Sherman.  Estimation of Infiltration from Leakage and Climate Indicators. , 1987 .

[23]  Wenwen Yang,et al.  The transport of gaseous pollutants due to stack and wind effect in high-rise residential buildings , 2015 .