Power maximization control of variable-speed wind generation system using permanent magnet synchronous generator

This paper proposes sensorless output power maximization control of a wind generation system. A permanent magnet synchronous generator (PMSG) is used as a variable speed generator in the proposed system. The generator torque is suitably controlled according to the generator speed and thus the power from a wind turbine settles down on the maximum power point by the proposed MPPT control method, where the information on wind velocity is not required. Moreover, the maximum available generated power is obtained by the optimum current vector control. The current vector of PMSG is optimally controlled according to the generator speed and the required torque in order to minimize the losses of PMSG considering the voltage and current constraints. The proposed wind power generation system can be achieved without mechanical sensors such as wind velocity detector and a position sensor. Several experimental results show the effectiveness of the proposed control method. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 11–19, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/eej.20043