The spur planetary gear torsional stiffness and its crack sensitivity under quasi-static conditions

Abstract The sun–planet and ring–planet tooth mesh stiffness variations and the resulting transmission errors are the main internal vibration generation mechanisms for planetary gear systems. This paper presents the results of torsional stiffness analysis of involute spur planetary gear systems in mesh using finite element methods. A planetary gear model with three planet gears and fixed ring gear and its subsystem models have been developed to study the subsystem and overall torsional stiffnesses. Based on the analysis of torsional mesh stiffness, predictive models for single branch sun–planet–ring and overall planetary gear torsional stiffnesses have been proposed. A crack coefficient was introduced to the sun–planet and ring–planet meshes to predict the effect and sensitivity of changes to the overall torsional mesh stiffness. The resulting mesh stiffness crack sensitivity of the overall gear system was analysed under quasi-static conditions. It was found that the carrier arm stiffness has great influence on the crack sensitivity while the overall stiffness was most sensitive to the crack on the sun–planet mesh.

[1]  Wennian Yu,et al.  The effects of spur gear tooth spatial crack propagation on gear mesh stiffness , 2015 .

[2]  Ian Howard,et al.  Calculation of the Combined Torsional Mesh Stiffness of Spur Gears with Two- and Three-Dimensional Parametrical FE Models , 2011 .

[3]  Yimin Shao,et al.  Dynamic simulation of planetary gear with tooth root crack in ring gear , 2013 .

[4]  W. F. Riley,et al.  Engineering Mechanics: Statics , 1993 .

[5]  Anindo Banerjee.  A Model to Predict Sun Gear Radial Orbit of a Planetary Gear Set having Manufacturing Errors , 2012 .

[6]  John F. Hall,et al.  Dynamic Optimization of Drivetrain Gear Ratio to Maximize Wind Turbine Power Generation—Part 1: System Model and Control Framework , 2013 .

[7]  Robert G. Parker,et al.  Nonlinear Dynamics of Planetary Gears Using Analytical and Finite Element Models , 2007 .

[8]  R. Subburaj Ramasamy,et al.  Calculation of the Combined Torsional Mesh Stiffness of Spur Gears with Two- and Three- Dimensional Parametrical FE Models , 2012 .

[9]  Ian Howard,et al.  Error Analysis on Finite Element Modeling of Involute Spur Gears , 2006 .

[10]  Hui Ma,et al.  Review on dynamics of cracked gear systems , 2015 .

[11]  Hui Ma,et al.  Fault features analysis of cracked gear considering the effects of the extended tooth contact , 2015 .

[12]  Robert G. Parker,et al.  Mesh Phasing Relationships in Planetary and Epicyclic Gears , 2003 .

[13]  Jiande Wang,et al.  Numerical and Experimental Analysis of Spur Gears in Mesh , 2003 .

[14]  Ian Howard,et al.  The torsional stiffness of involute spur gears , 2004 .

[15]  Donald R. Houser,et al.  Mathematical models used in gear dynamics—A review , 1988 .

[16]  Zaigang Chen,et al.  Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack , 2013 .

[17]  Jinchen Ji,et al.  Nonlinear torsional vibrations of a wind turbine gearbox , 2015 .

[18]  Robert G. Parker,et al.  PLANETARY GEAR PARAMETRIC INSTABILITY CAUSED BY MESH STIFFNESS VARIATION , 2002 .

[19]  Ahmet Kahraman,et al.  Planetary gear train dynamics , 1994 .

[20]  J. L. Meriam.  Engineering Mechanics: Statics, 7/E SI Version , 2016 .

[21]  Anand Parey,et al.  Simulation of crack propagation in spur gear tooth for different gear parameter and its influence on mesh stiffness , 2013 .

[22]  Anand Parey,et al.  Effect of shaft misalignment and friction force on time varying mesh stiffness of spur gear pair , 2015 .

[23]  Ahmet Kahraman,et al.  Natural Modes of Planetary Gear Trains , 1994 .

[24]  Ahmet Kahraman,et al.  A theoretical and experimental investigation of modulation sidebands of planetary gear sets , 2009 .

[25]  Yimin Shao,et al.  Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth , 2011 .

[26]  Anand Parey,et al.  Failure path based modified gear mesh stiffness for spur gear pair with tooth root crack , 2013 .

[27]  Chang-Wan Kim,et al.  Dynamic modeling and analysis of a wind turbine drivetrain using the torsional dynamic model , 2013 .

[28]  Shuting Li.  Finite element analyses for contact strength and bending strength of a pair of spur gears with machining errors, assembly errors and tooth modifications , 2007 .

[29]  Robert G. Parker,et al.  Analytical Characterization of the Unique Properties of Planetary Gear Free Vibration , 1999 .

[30]  I. M. Howard.  An Investigation of Vibration Signal Averaging of Individual Components in an Epicyclic Gearbox , 1991 .

[31]  Avinash Singh,et al.  Load sharing behavior in epicyclic gears: Physical explanation and generalized formulation , 2010 .

[32]  Omar D. Mohammed,et al.  Improving mesh stiffness calculation of cracked gears for the purpose of vibration-based fault analysis , 2013 .

[33]  S. Sheng,et al.  Integrated Approach Using Condition Monitoring and Modeling to Investigate Wind Turbine Gearbox Design: Preprint , 2015 .

[34]  Biswajit Basu,et al.  Passive control of floating offshore wind turbine nacelle and spar vibrations by multiple tuned mass dampers , 2015 .

[35]  Hui Ma,et al.  Time-varying mesh stiffness calculation of cracked spur gears , 2014 .

[36]  Rui Ma,et al.  Research on the dynamic mechanism of the gear system with local crack and spalling failure , 2012 .