Investigation of changes in compressed moso bamboo (Phyllostachys pubescens) after hot-press molding

[1]  Yafang Yin,et al.  Effects of thermo-hygro-mechanical (THM) treatment on the viscoelasticity of in-situ lignin , 2017 .

[2]  Youke Zhao.  Studies on pre-treatment by compression for wood drying III: the reduction of moisture content, the recovery rate, and mechanical properties of wood compressed at different moisture content conditions , 2017, Journal of Wood Science.

[3]  R. Starke,et al.  Thermal modification of African alpine bamboo , 2016, European Journal of Wood and Wood Products.

[4]  W. Shangguan,et al.  Effects of heat treatment on the properties of bamboo scrimber , 2016, Journal of Wood Science.

[5]  H. Ren,et al.  Effects of Temperature on the Compressive Strength Parallel to the Grain of Bamboo Scrimbe , 2016, Materials.

[6]  Wenji Yu,et al.  Surface chemical composition analysis of heat-treated bamboo , 2016 .

[7]  G. D. Smith,et al.  Comparison of the flexural behavior of natural and thermo-hydro-mechanically densified Moso bamboo , 2016, European Journal of Wood and Wood Products.

[8]  E. Obataya,et al.  Effects of heating humidity on the physical properties of hydrothermally treated spruce wood , 2016, Wood Science and Technology.

[9]  C. Ota,et al.  Permanent Fixation of Bending Deformation inWood by Heat Treatment , 2016 .

[10]  M. K. Kuzman,et al.  Influence of temperature of thermal treatment on surface densification of spruce , 2016, European Journal of Wood and Wood Products.

[11]  K. Pant,et al.  Characterization of commercially important Asian bamboo species , 2015, European Journal of Wood and Wood Products.

[12]  Dick Sandberg,et al.  Thermo-hydro and thermo-hydro-mechanical wood processing: An opportunity for future environmentally friendly wood products , 2013 .

[13]  Yan Yu,et al.  Dynamic mechanical thermal analysis of moso bamboo (Phyllostachys heterocycla) at different moisture content. , 2012 .

[14]  M. Hughes,et al.  Reducing the set-recovery of surface densified solid Scots pine wood by hydrothermal post-treatment , 2012, European Journal of Wood and Wood Products.

[15]  Ya Mei Zhang,et al.  Effect of thermal treatment on the physical and mechanical properties of phyllostachys pubescen bamboo , 2012, European Journal of Wood and Wood Products.

[16]  F. Kamke,et al.  Influence of temperature and steam environment on set recovery of compressive deformation of wood , 2012, Wood Science and Technology.

[17]  Ahmed Koubaa,et al.  Densification of wood veneers by compression combined with heat and steam , 2011, European Journal of Wood and Wood Products.

[18]  H. Yokochi,et al.  The pliability of wood and its application to molding , 2009 .

[19]  S. Das,et al.  Dynamic mechanical analysis of dry wood: Linear viscoelastic response region and effects of minor moisture changes , 2007 .

[20]  Walter Liese,et al.  On the anatomy of Asian bamboos, with special reference to their vascular bundles , 1971, Wood Science and Technology.

[21]  Y. Shinoda,et al.  Compressive-Molding of Wood by High-Pressure Steam-Treatment: Part 2. Mechanism of Permanent Fixation , 1998 .

[22]  M. Inoue,et al.  PERMANENT FIXATION OF BENDING DEFORMATION OF WOOD BY STEAM TREATMENT , 1997 .

[23]  Shigeyasu Amada,et al.  Fiber texture and mechanical graded structure of bamboo , 1997 .

[24]  Timothy G. Rials,et al.  Relaxation behaviour of the amorphous components of wood , 1987 .