Micromachined High-Aspect-Ratio Parylene Spring and Its Application to Low-Frequency Accelerometers

A new microfabrication technology for high-aspect- ratio parylene structure has been developed for soft spring applications. Free-standing parylene beams with widths of 10–40$mu m$and aspect ratios of 10–20 have been successfully fabricated. Since parylene has a small Young's modulus, a high-aspect-ratio beam with a spring constant of the order of$1,times, 10 ^-3~ N/ m$has been realized. The large yield strain of parylene enables a test structure to have a large-amplitude oscillation of 600$mu m _ pmathchar"702D p$, without any failure of the high-aspect-ratio springs. An early prototype of in-plane capacitive accelerometer was also developed. It was found that its resonant frequency is as low as 37 Hz, and the noise spectral density is 64$mu g/( Hz)^0.5$.1606

[1]  F. Ayazi,et al.  High aspect-ratio combined poly and single-crystal silicon (HARPSS) MEMS technology , 2000, Journal of Microelectromechanical Systems.

[2]  Bernhard E. Boser,et al.  An integrated Surface micromachined capacitive lateral accelerometer with 2 uG/rt-Hz resolution , 2002 .

[3]  L.P. Lee,et al.  Polymer MEMS-based microgripper for single cell manipulation , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[4]  Jonathan J. Bernstein,et al.  Low-noise MEMS vibration sensor for geophysical applications , 1999 .

[5]  Jun Xie,et al.  Surface micromachined electrostatically actuated micro peristaltic pump. , 2004, Lab on a chip.

[6]  K. Najafi,et al.  An in-plane high-sensitivity, low-noise micro-g silicon accelerometer with CMOS readout circuitry , 2004 .

[7]  Chang Liu,et al.  Parylene surface-micromachined membranes for sensor applications , 2004, Journal of Microelectromechanical Systems.

[8]  Hongsik Park,et al.  Fabrication of Atomic Force Microscope Probe with Low Spring Constant Using SU-8 Photoresist , 2003 .

[9]  J. McDonald,et al.  Stress in thermally annealed parylene films , 1992 .

[10]  Chih-Ming Ho,et al.  Micromachined membrane particle filters , 1999, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[11]  T. Kenny,et al.  A high-performance planar piezoresistive accelerometer , 2000, Journal of Microelectromechanical Systems.

[12]  H. Guckel,et al.  High-aspect-ratio micromachining via deep X-ray lithography , 1998, Proc. IEEE.

[13]  N. Kasagi,et al.  Seismic Power Generator Using High-Performance Polymer Electret , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[14]  Meng-Nian Niu,et al.  Piezoelectric bimorph microphone built on micromachined parylene diaphragm , 2003 .

[15]  T.C. Green,et al.  Architectures for vibration-driven micropower generators , 2004, Journal of Microelectromechanical Systems.

[16]  N. D. Rooij,et al.  All-photoplastic, soft cantilever cassette probe for scanning force microscopy , 2000 .

[17]  M. Schmidt,et al.  Characterization of a Time Multiplexed Inductively Coupled Plasma Etcher , 1999 .

[18]  Y. Tai,et al.  BrF3 dry release technology for large freestanding parylene microstructures and electrostatic actuators , 2002 .

[19]  Sylvain Ballandras,et al.  Fabrication of a new highly-symmetrical, in-plane accelerometer structure by anisotropic etching of (100) silicon , 1997 .

[20]  K. Najafi,et al.  Design and fabrication of submicrometer, single crystal Si accelerometer , 2001 .

[21]  T. Lu,et al.  A Model for the Chemical Vapor Deposition of Poly(para-xylylene) (Parylene) Thin Films , 2002 .

[22]  Maxim Zalalutdinov,et al.  Fabrication of flexible polymer tubes for micro and nanofluidic applications , 2002 .

[23]  Gang Zhang,et al.  A post-CMOS micromachined lateral accelerometer , 2002 .

[24]  Qing He,et al.  Residual stress in thin-film parylene-c , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[25]  Y. Tai,et al.  Titanium-alloy MEMS wing technology for a micro aerial vehicle application , 2001 .

[26]  Y. Tai,et al.  A micromachined chip-based electrospray source for mass spectrometry. , 2000, Analytical chemistry.

[27]  R. Horowitz,et al.  Design and fabrication of an angular microactuator for magnetic disk drives , 1998 .

[28]  Peter J. Hesketh,et al.  Parylene gas chromatographic column for rapid thermal cycling , 2002 .