Effect of formaldehyde on ventilation rate and energy demand in Danish homes: Development of emission models and building performance simulation

[1]  T. Salthammer,et al.  Formaldehyde in the Indoor Environment , 2010, Chemical reviews.

[2]  Jianshun Zhang,et al.  Determination of partition and diffusion coefficients of formaldehyde in selected building materials and impact of relative humidity , 2011, Journal of the Air & Waste Management Association.

[3]  Filip Johnsson,et al.  Energy usage and technical potential for energy saving measures in the Swedish residential building stock , 2013 .

[4]  Hans Stymne,et al.  Measuring ventilation rates in the Swedish housing stock , 1994 .

[5]  I. Andersen,et al.  Indoor air pollution due to chipboard used as a construction material , 1975 .

[6]  Yinping Zhang,et al.  Impact of temperature on the ratio of initial emittable concentration to total concentration for formaldehyde in building materials: theoretical correlation and validation. , 2015, Environmental science & technology.

[7]  Crystal L. Pilon,et al.  The Effect of Indoor Humidity on Water Vapor Release in Homes , 2007 .

[8]  John C. Little,et al.  Dimensionless correlations to predict VOC emissions from dry building materials , 2007 .

[9]  Chia-Yen Lee,et al.  Formaldehyde Gas Sensors: A Review , 2013, Sensors.

[10]  M S Waring,et al.  Secondary organic aerosol in residences: predicting its fraction of fine particle mass and determinants of formation strength. , 2014, Indoor air.

[11]  George E. Myers,et al.  Emission of formaldehyde by particleboard : effect of ventilation rate and loading on air-contamination levels , 1981 .

[12]  Jelle Laverge,et al.  Heat recovery ventilation operation traded off against natural and simple exhaust ventilation in Europe by primary energy factor, carbon dioxide emission, household consumer price and exergy , 2012 .

[13]  Ambrose Dodoo,et al.  Primary energy implications of ventilation heat recovery in residential buildings , 2011 .

[14]  Xu Zhang,et al.  A Simple VOC Prioritization Method to Determine Ventilation Rate for Indoor Environment Based on Building Material Emissions , 2015 .

[15]  J. Mo,et al.  Understanding and controlling airborne organic compounds in the indoor environment: mass transfer analysis and applications. , 2016, Indoor air.

[16]  Lidia Morawska,et al.  Real-time sensors for indoor air monitoring and challenges ahead in deploying them to urban buildings. , 2016, The Science of the total environment.

[17]  Jianyin Xiong,et al.  Association between the emission rate and temperature for chemical pollutants in building materials: general correlation and understanding. , 2013, Environmental science & technology.

[18]  S. Shi,et al.  Research Progress on Formaldehyde Emission of Wood-Based Panel , 2018, International Journal of Polymer Science.

[19]  Xu Zhang,et al.  A preliminary ventilation rate determination methods study for residential buildings and offices based on VOC emission database , 2014 .

[20]  H. Willem,et al.  Formaldehyde and acetaldehyde exposure mitigation in US residences: in-home measurements of ventilation control and source control. , 2015, Indoor air.

[21]  J. J. Hoetjer,et al.  A Model for Formaldehyde Release from Particleboard , 1986 .

[22]  Weihui Liang,et al.  Long-Term Formaldehyde Emissions from Medium-Density Fiberboard in a Full-Scale Experimental Room: Emission Characteristics and the Effects of Temperature and Humidity. , 2015, Environmental science & technology.

[23]  Elliott T. Gall,et al.  Ozone reaction with interior building materials: Influence of diurnal ozone variation, temperature and humidity , 2016 .

[24]  Xudong Yang,et al.  The combined effects of temperature and humidity on initial emittable formaldehyde concentration of a medium-density fiberboard , 2016 .

[25]  M. Sherman,et al.  Smart ventilation energy and indoor air quality performance in residential buildings: A review , 2017 .

[26]  F. Liu,et al.  Lead binding to soil fulvic and humic acids: NICA-Donnan modeling and XAFS spectroscopy. , 2013, Environmental science & technology.

[27]  W. F. Lehmann.  Effect of ventilation and loading rates in large chamber testing of formaldehyde emissions from composite panels , 1987 .

[28]  Tunga Salthammer,et al.  The formaldehyde dilemma. , 2015, International journal of hygiene and environmental health.

[29]  Svend Svendsen,et al.  Energy savings in Danish residential building stock , 2006 .

[30]  G. Clausen,et al.  Diurnal and seasonal variation in air exchange rates and interzonal airflows measured by active and passive tracer gas in homes , 2016 .

[31]  L. Meng,et al.  Experimental and Numerical Study of the Interfacial Shear Strength in Carbon Fiber/Epoxy Resin Composite under Thermal Loads , 2018 .

[32]  A Rackes,et al.  Do time-averaged, whole-building, effective volatile organic compound (VOC) emissions depend on the air exchange rate? A statistical analysis of trends for 46 VOCs in U.S. offices. , 2016, Indoor air.

[33]  Jørn Toftum,et al.  Ventilation rates in the bedrooms of 500 Danish children , 2010 .

[34]  Charles J. Weschler,et al.  Changes in indoor pollutants since the 1950s , 2009 .

[35]  C. Weschler.  Chemistry in indoor environments: 20 years of research. , 2011, Indoor air.

[36]  L. Morawska,et al.  Smart homes and the control of indoor air quality , 2018, Renewable and Sustainable Energy Reviews.

[37]  Yinping Zhang,et al.  Influence of humidity on the initial emittable concentration of formaldehyde and hexaldehyde in building materials: experimental observation and correlation , 2016, Scientific Reports.

[38]  G. Morrison.  Recent Advances in Indoor Chemistry , 2015 .

[39]  C. Dimitroulopoulou.  Ventilation in European dwellings: A review , 2012 .