Trends in Wind Turbine Generator Systems

This paper reviews the trends in wind turbine generator systems. After discussing some important requirements and basic relations, it describes the currently used systems: the constant speed system with squirrel-cage induction generator, and the three variable speed systems with doubly fed induction generator (DFIG), with gearbox and fully rated converter, and direct drive (DD). Then, possible future generator systems are reviewed. Hydraulic transmissions are significantly lighter than gearboxes and enable continuously variable transmission, but their efficiency is lower. A brushless DFIG is a medium speed generator without brushes and with improved low-voltage ride-through characteristics compared with the DFIG. Magnetic pseudo DDs are smaller and lighter than DD generators, but need a sufficiently low and stable magnet price to be successful. In addition, superconducting generators can be smaller and lighter than normal DD generators, but both cost and reliability need experimental demonstration. In power electronics, there is a trend toward reliable modular multilevel topologies.

[1]  D. Howe,et al.  A novel magnetic harmonic gear , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[2]  Maxime R. Dubois,et al.  Optimized Permanent Magnet Generator Topologies for Direct-Drive Wind Turbines , 2004 .

[3]  H. Polinder,et al.  Principles of electrical design of permanent magnet generators for direct drive renewable energy systems , 2013 .

[4]  T.M. Jahns,et al.  Power Converter Design for an Integrated Modular Motor Drive , 2007, 2007 IEEE Industry Applications Annual Meeting.

[5]  Bernd-Robert Höhn.  Future Transmissions for Wind Turbines , 2011 .

[6]  Stavros A. Papathanassiou,et al.  A review of grid code technical requirements for wind farms , 2009 .

[7]  G. Shrestha,et al.  Structural Flexibility of Large Direct Drive Generators for Wind Turbines , 2013 .

[8]  Gabriele Grandi,et al.  W-CVT continuously variable transmission for wind energy conversion system , 2009, 2009 IEEE Power Electronics and Machines in Wind Applications.

[9]  Anca Daniela Hansen,et al.  Fault ride-through capability of DFIG wind turbines , 2007 .

[10]  M. Liserre,et al.  Power Electronics Converters for Wind Turbine Systems , 2012, IEEE Transactions on Industry Applications.

[11]  Swarn S. Kalsi,et al.  Applications of High Temperature Superconductors to Electric Power Equipment , 2011 .

[12]  Zhe Chen.  Power electronic converter systems for direct drive renewable energy applications , 2013 .

[13]  Roberto Cárdenas,et al.  Overview of control systems for the operation of DFIGs in wind energy applications , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[14]  H. Voltolini,et al.  Performance Analysis with Power Factor Compensation of a 75 kW Brushless Doubly Fed Induction Generator Prototype , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[15]  B. Gamble,et al.  10 MW Class Superconductor Wind Turbine Generators , 2011, IEEE Transactions on Applied Superconductivity.

[16]  S. Brisset,et al.  Design and Optimization of a Nine-Phase Axial-Flux PM Synchronous Generator With Concentrated Winding for Direct-Drive Wind Turbine , 2006, IEEE Transactions on Industry Applications.

[17]  D. Lahaye,et al.  Analytical and FE calculation of eddy-current losses in PM concentrated winding machines for wind turbines , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[18]  H. Polinder,et al.  Optimization of Multibrid Permanent-Magnet Wind Generator Systems , 2009, IEEE Transactions on Energy Conversion.

[19]  H. Polinder,et al.  Eddy-Current Losses in the Solid Back-Iron of PM Machines for different Concentrated Fractional Pitch Windings , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[20]  H. Polinder,et al.  Case study of the permanent magnet direct drive generator in the Zephyros wind turbine , 2013 .

[21]  Magdi Ragheb,et al.  Wind turbine gearbox technologies , 2010, 2010 1st International Nuclear & Renewable Energy Conference (INREC).

[22]  Peter Tavner,et al.  Symmetrical low voltage ride-through of a 250 kW brushless DFIG , 2012 .

[23]  Markus Mueller,et al.  Structural mass in direct-drive permanent magnet electrical generators , 2008 .

[24]  C Wessels,et al.  Fault Ride-Through of a DFIG Wind Turbine Using a Dynamic Voltage Restorer During Symmetrical and Asymmetrical Grid Faults , 2011, IEEE Transactions on Power Electronics.

[25]  K.T. Chau,et al.  A Magnetic-Geared Outer-Rotor Permanent-Magnet Brushless Machine for Wind Power Generation , 2007, 2007 IEEE Industry Applications Annual Meeting.

[26]  E. Spooner,et al.  Lightweight ironless-stator PM generators for direct-drive wind turbines. , 2005 .

[27]  Peter Tavner,et al.  Performance Characterisation of Brushless Doubly-Fed Generator , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[28]  Maarten J. Kamper,et al.  Review of direct‐drive radial flux wind turbine generator mechanical design , 2012 .

[29]  Frede Blaabjerg,et al.  Review of Contemporary Wind Turbine Concepts and Their Market Penetration , 2004 .

[30]  Finn Gunnar Nielsen,et al.  Modeling, simulation and control of a wind turbine with a hydraulic transmission system , 2012 .

[31]  H. Polinder.  Overview of and trends in wind turbine generator systems , 2011, 2011 IEEE Power and Energy Society General Meeting.

[32]  M. Mueller,et al.  Electrical generators for direct drive systems: a technology overview , 2013 .

[34]  P. C. Roberts,et al.  Performance of the bdfm as a generator and motor , 2005 .

[35]  Peter Tavner,et al.  Reliability Comparison of Direct-Drive and Geared-Drive Wind Turbine Concepts , 2018, Renewable Energy.

[36]  C. Lewis,et al.  A Direct Drive Wind Turbine HTS Generator , 2007, 2007 IEEE Power Engineering Society General Meeting.

[37]  Markus Mueller,et al.  Electrical, thermal and structural generator design and systems integration for direct drive renewable energy systems , 2013 .

[38]  H Polinder,et al.  Structural Flexibility: A Solution for Weight Reduction of Large Direct-Drive Wind-Turbine Generators , 2010, IEEE Transactions on Energy Conversion.

[39]  S. S. Gjerde,et al.  Fault tolerance of a 10 MW, 100 kV transformerless offshore wind turbine concept with a modular converter system , 2012, 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC).

[40]  Markus Mueller,et al.  Structural analysis and optimisation of transverse flux permanent magnet machines for 5 and 10 MW direct drive wind turbines , 2012 .

[41]  Bin Wu,et al.  Powering the Future of Industry: High-Power Adjustable Speed Drive Topologies , 2012, IEEE Industry Applications Magazine.

[42]  Bogi Bech Jensen,et al.  Development of superconducting wind turbine generators , 2013 .

[43]  Maarten J. Kamper,et al.  Comparison of air-cored and iron-cored non-overlap winding radial flux permanent magnet direct drive wind generators , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[44]  S. Mezani,et al.  A Novel “Pseudo” Direct-Drive Brushless Permanent Magnet Machine , 2008, IEEE Transactions on Magnetics.

[45]  E. Spooner,et al.  A Multilevel Modular Converter for a Large, Light Weight Wind Turbine Generator , 2008, IEEE Transactions on Power Electronics.

[46]  Henk Polinder,et al.  Structural mass minimization of large direct-drive wind generators using a buoyant rotor structure , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[47]  Peter Tavner,et al.  Equivalent circuit for the brushless doubly fed machine (BDFM) including parameter estimation and experimental verification , 2005 .

[48]  J. Soulard,et al.  Transverse Flux Machines for Sustainable Development - Road Transportation and Power Generation , 2007, 2007 7th International Conference on Power Electronics and Drive Systems.

[49]  P.O. Rasmussen,et al.  Development of a high-performance magnetic gear , 2003, IEEE Transactions on Industry Applications.

[50]  J. Morren,et al.  Ridethrough of wind turbines with doubly-fed induction generator during a voltage dip , 2005, IEEE Transactions on Energy Conversion.

[51]  Marco Liserre,et al.  Overview of Multi-MW Wind Turbines and Wind Parks , 2011, IEEE Transactions on Industrial Electronics.

[52]  B. Hahn,et al.  Reliability of Wind Turbines , 2007 .

[53]  Peter Tavner,et al.  Reliability of wind turbine subassemblies , 2009 .

[54]  A.K. Wallace,et al.  Experimental evaluation of a variable-speed, doubly-fed wind-power generation system , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[55]  Ozan Keysan,et al.  Application of high-temperature superconducting machines to direct drive renewable energy systems , 2013 .

[56]  Tetsuo Tomiyama,et al.  Reliability of wind turbine technology through time , 2008 .

[57]  J. A. Ferreira,et al.  The Multilevel Modular DC Converter , 2013, IEEE Transactions on Power Electronics.

[58]  Michal Sztykiel.  Overview of power converter designs feasible for high voltage transformer-less wind turbine , 2011, 2011 IEEE International Symposium on Industrial Electronics.

[59]  Aki Mikkola,et al.  Direct-drive permanent magnet generators for high-power wind turbines: benefits and limiting factors , 2012 .

[60]  H. Polinder,et al.  Fault tolerant generator systems for wind turbines , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[61]  J.A. Ferreira,et al.  A 50kW integrated fault tolerant permanent magnet machine and motor drive , 2008, 2008 IEEE Power Electronics Specialists Conference.

[62]  Ronghai Qu,et al.  Review of Superconducting Generator Topologies for Direct-Drive Wind Turbines , 2013, IEEE Transactions on Applied Superconductivity.

[63]  Peter Tavner,et al.  Reliability and availability of wind turbine electrical and electronic components. , 2011 .

[64]  J. Pyrhonen,et al.  Effect of Radial Cooling Ducts on the Electromagnetic Performance of the Permanent Magnet Synchronous Generators With Double Radial Forced Air Cooling for Direct-Driven Wind Turbines , 2013, IEEE Transactions on Magnetics.

[65]  E. de Vries,et al.  Wind turbine drive systems: a commercial overview , 2013 .

[66]  Deok-je Bang.  Design of Transverse Flux Permanent Magnet Machines for Large Direct-Drive Wind Turbines , 2010 .

[67]  H. Polinder,et al.  Comparison of direct-drive and geared generator concepts for wind turbines , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[68]  F. Blaabjerg,et al.  Thermal Loading and Reliability of 10-MW Multilevel Wind Power Converter at Different Wind Roughness Classes , 2012, IEEE Transactions on Industry Applications.

[69]  Henk Polinder,et al.  Basic Operation Principles and Electrical Conversion Systems of Wind Turbines , 2005 .

[70]  Zhe Chen,et al.  A new structure based on cascaded multilevel converter for variable speed wind turbine , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

[71]  G Pannell,et al.  Minimum-Threshold Crowbar for a Fault-Ride-Through Grid-Code-Compliant DFIG Wind Turbine , 2010, IEEE Transactions on Energy Conversion.

[72]  Zhe Chen,et al.  A Review of the State of the Art of Power Electronics for Wind Turbines , 2009, IEEE Transactions on Power Electronics.

[73]  P. K. Olsen,et al.  A Transformerless generator-converter concept making feasible a 100 kV light weight offshore wind turbine: Part I - The generator , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[74]  Pascal Brochet,et al.  Design and Optimization of a Nine-Phase Axial-Flux PM Synchronous Generator With Concentrated Winding for Direct-Drive Wind Turbine , 2006 .

[75]  Peter Tavner,et al.  Offshore Wind Turbines: Reliability, availability and maintenance , 2012 .

[76]  Damian Flynn,et al.  Decoupled-DFIG Fault Ride-Through Strategy for Enhanced Stability Performance During Grid Faults , 2010, IEEE Transactions on Sustainable Energy.

[77]  Bogi Bech Jensen,et al.  Feasibility study of 5 MW superconducting wind turbine generator , 2011 .

[78]  Zhe Chen.  An overview of power electronic converter technology for renewable energy systems , 2013 .