NASA HERMeS Hall Thruster Electrical Configuration Characterization

The NASA Hall Effect Rocket with Magnetic Shielding (HERMeS) 12.5 kW Technology Demonstration Unit-1 (TDU-1) Hall thruster has been the subject of extensive technology maturation in preparation for development into a flight ready propulsion system. Part of the technology maturation was to test the TDU-1 thruster in several ground based electrical configurations to assess the thruster robustness and suitability to successful in-space operation. The ground based electrical configuration testing has recently been demonstrated as an important step in understanding and assessing how a Hall thruster may operate differently in-space compared to ground based testing, and to determine the best configuration to conduct development and qualification testing. This paper describes the electrical configuration testing of the HERMeS TDU-1 Hall thruster in NASA Glenn Research Center's Vacuum Facility 5. The three electrical configurations examined were 1) thruster body tied to facility ground, 2) thruster floating, and 3) thruster body electrically tied to cathode common. The HERMeS TDU-1 Hall thruster was also configured with two different exit plane boundary conditions, dielectric and conducting, to examine the influence on the electrical configuration characterization.

[1]  James L. Myers,et al.  Non-Contact Thermal Characterization of NASA’s 12.5-kW Hall Thruster , 2015 .

[2]  Bryan K. Smith,et al.  Solar Electric Propulsion Vehicle Demonstration to Support Future Space Exploration Missions , 2012 .

[3]  E. Choueiri.  Fundamental difference between the two Hall thruster variants , 2001 .

[4]  Jonathan M. Burt,et al.  Characterization of Vacuum Facility Background Gas Through Simulation and Considerations for Electric Propulsion Ground Testing , 2015 .

[5]  James E. Polk,et al.  Performance and Facility Background Pressure Characterization Tests of NASAs 12.5-kW Hall Effect Rocket with Magnetic Shielding Thruster , 2015 .

[6]  A. V. Semenkin,et al.  Parameters of D80 Anode Layer Thruster in One-and Two-Stage Operation Modes , 2001 .

[7]  John R. Brophy,et al.  Near-Earth Asteroid Retrieval Mission (ARM) Study , 2013 .

[8]  I. Katz,et al.  Fundamentals of Electric Propulsion: Ion and Hall Thrusters , 2008 .

[9]  Bo Naasz,et al.  NASA's Asteroid Redirect Mission concept development summary , 2015, 2015 IEEE Aerospace Conference.

[10]  Alec D. Gallimore,et al.  Characterizing Vacuum Facility Backpressure Effects on the Performance of a Hall Thruster , 2001 .

[11]  Kunning G. Xu,et al.  High-power, null-type, inverted pendulum thrust stand. , 2009, The Review of scientific instruments.

[12]  Hani Kamhawi,et al.  Near-Surface Plasma Characterization of the 12.5-kW NASA TDU1 Hall Thruster , 2015 .

[13]  James H. Gilland,et al.  Wear Testing of the HERMeS Thruster , 2016 .

[14]  Hani Kamhawi,et al.  Optical Characterization of Component Wear and Near-Field Plasma of the Hermes Thruster , 2015 .

[15]  Paul A. Abell,et al.  Asteroid Redirect Robotic Mission: Robotic Boulder Capture Option Overview , 2014 .

[16]  Timothy R. Sarver-Verhey,et al.  The 12.5 kW Hall Effect Rocket with Magnetic Shielding (HERMeS) for the Asteroid Redirect Robotic Mission , 2016 .

[17]  James E. Polk,et al.  Hollow Cathode Assembly Development for the HERMeS Hall Thruster , 2016 .

[18]  I. Mikellides,et al.  Magnetic Shielding of the Acceleration Channel Walls in a Long-Life Hall Thruster , 2010 .

[19]  T. Haag,et al.  RHETT/EPDM Performance Characterization , 1998 .

[20]  Hani Kamhawi,et al.  Facility Effect Characterization Test of NASA's HERMeS Hall Thruster , 2016 .

[21]  David T. Jacobson.  High Voltage TAL Erosion Characterization , 2002 .

[22]  Raymond Liang,et al.  The Effect of Background Pressure on SPT-100 Hall Thruster Performance , 2014 .

[23]  James H. Gilland,et al.  Carbon Back Sputter Modeling for Hall Thruster Testing , 2016 .

[24]  David Q. King,et al.  Electrical Facility Effects on Hall Thruster Cathode Coupling: Performance and Plume Properties , 2016 .

[25]  Preliminary Assessment of the Role of a Conducting Vacuum Chamber in the Hall Effect Thruster Electrical Circuit , 2014 .

[26]  James H. Gilland,et al.  Performance, Facility Pressure Effects, and Stability Characterization Tests of NASA's Hall Effect Rocket with Magnetic Shielding Thruster , 2016 .

[27]  T. W. Haag.  Thrust stand for high‐power electric propulsion devices , 1991 .

[28]  Brian K. Muirhead,et al.  Asteroid Redirect Robotic Mission feasibility study , 2014, 2014 IEEE Aerospace Conference.

[29]  Hani Kamhawi,et al.  Investigation of the Effects of Facility Background Pressure on the Performance and Operation of the High Voltage Hall Accelerator , 2014 .

[30]  Hani Kamhawi,et al.  Plasma Oscillation Characterization of NASA's HERMeS Hall Thruster via High Speed Imaging , 2016 .

[31]  Jason D. Sommerville,et al.  Hall-effect thruster--Cathode coupling: The effect of cathode position and magnetic field topology , 2009 .

[32]  I. Mikellides,et al.  Assessment of Pole Erosion in a Magnetically Shielded Hall Thruster , 2014 .

[33]  Hani Kamhawi,et al.  Effect of Background Pressure on the Plasma Oscillation Characteristics of the HiVHAc Hall Thruster , 2014 .

[34]  Michael Sean McDonald,et al.  Electron Transport in Hall Thrusters , 2012 .

[35]  D. A. King,et al.  Electrical Facility Effects on Hall-Effect-Thruster Cathode Coupling: Discharge Oscillations and Facility Coupling , 2016 .

[36]  Jason D. Frieman,et al.  Role of a Conducting Vacuum Chamber in the Hall Effect Thruster Electrical Circuit , 2014 .

[37]  George R. Schmidt,et al.  High-Power Hall Propulsion Development at NASA Glenn Research Center , 2012 .

[38]  James E. Polk,et al.  Thermal Characteristics of a Lanthanum Hexaboride Hollow Cathode , 2015 .

[39]  I. Mikellides,et al.  Wear Testing of a Magnetically Shielded Hall Thruster at 2000 s Specific Impulse IEPC-2015-155 , 2015 .

[40]  M. Martínez-Sánchez,et al.  A numerical study of low-frequency discharge oscillations in Hall thrusters , 1997 .

[41]  David H. Manzella,et al.  High-Power Solar Electric Propulsion for Future NASA Missions , 2014 .

[42]  Rostislav Spektor,et al.  Investigation of the Effects of Facility Background Pressure on the Performance and Voltage-Current Characteristics of the High Voltage Hall Accelerator , 2014 .

[43]  Laura M. Burke,et al.  Overview of Mission Design for NASA Asteroid Redirect Robotic Mission Concept , 2013 .

[44]  I. Mikellides,et al.  Magnetic shielding of Hall thrusters at high discharge voltages , 2014 .

[45]  Rostislav Spektor,et al.  The Effects of Background Pressure on Hall Thruster Operation , 2012 .

[46]  Richard R. Hofer,et al.  Finite Pressure Effects in Magnetically Shielded Hall Thrusters , 2014 .

[47]  James E. Polk,et al.  Overview of the Development of the Solar Electric Propulsion Technology Demonstration Mission 12.5-kW Hall Thruster , 2014 .

[48]  Denis Estublier,et al.  The SMART-1 Hall Effect Thruster Around the Moon: In Flight Experience , 2005 .