Recent Advances and Strategies for High-Performance Coatings

[1]  Y. Ou,et al.  Structure, mechanical and tribological properties of thick CrNx coatings deposited by HiPIMS , 2022, Vacuum.

[2]  Y. Ou,et al.  Tribocorrosion behaviors of superhard yet tough Ti-C-N ceramic coatings , 2022, Surface and Coatings Technology.

[3]  X. Zhang,et al.  Tribocorrosion behaviors of nc-TiC/a-C:H nanocomposite coatings: In-situ electrochemical response , 2021, Thin Solid Films.

[4]  P. Xiao,et al.  Temperature-Adaptive Ultralubricity of a WS2/a-C Nanocomposite Coating: Performance from Room Temperature up to 500 °C , 2021, ACS applied materials & interfaces.

[5]  S. Björklund,et al.  Novel utilization of liquid feedstock in high velocity air fuel (HVAF) spraying to deposit solid lubricant reinforced wear resistant coatings , 2021 .

[6]  S. L. Teo,et al.  Cold spray deposition of Inconel 718 in comparison with atmospheric plasma spray deposition , 2021 .

[7]  Yuan Liu,et al.  Sb-doped SnO2 (ATO) hollow submicron spheres for solar heat insulation coating , 2021 .

[8]  Yong Cheng,et al.  Optical properties of diamond-like carbon films prepared by pulsed laser deposition onto 3D surface substrate , 2021 .

[9]  Jianliang Lin,et al.  Development of thermal barrier coatings using reactive pulsed dc magnetron sputtering for thermal protection of titanium alloys , 2020 .

[10]  M. Makha,et al.  Design of hard coatings deposited by HiPIMS and dcMS , 2020 .

[11]  Guo‐Jun Zhang,et al.  High-entropy thermal barrier coating of rare-earth zirconate: A case study on (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 prepared by atmospheric plasma spraying , 2020 .

[12]  Akhil Tayal,et al.  Structural, electronic, and magnetic properties of Co4N thin films deposited using HiPIMS , 2020 .

[13]  S. Tamulevičius,et al.  Structure and optical properties of diamond like carbon films containing aluminium and alumina , 2020 .

[14]  M. S. Onses,et al.  Fabrication of robust superhydrophobic surfaces by one-step spray coating: Evaporation driven self-assembly of wax and nanoparticles into hierarchical structures , 2020 .

[15]  A. Anders,et al.  Vanadium oxide coatings to self-regulate current sharing in high-temperature superconducting cables and magnets , 2020, Journal of Applied Physics.

[16]  T. Hussain,et al.  A review on environmental barrier coatings: History, current state of the art and future developments , 2020, Journal of the European Ceramic Society.

[17]  M. Karabaş.  Production and characterization of Nd and Dy doped lanthanum zirconate-based thermal barrier coatings , 2020 .

[18]  Qin Li,et al.  Adhesion and cohesion of epoxy-based industrial composite coatings , 2020 .

[19]  Hao Chen,et al.  Corrosion protective mechanism of smart graphene-based self-healing coating on carbon steel , 2020 .

[20]  B. Liao,et al.  Tribocorrosion behaviors of TiSiCN nanocomposite coatings deposited by high power impulse magnetron sputtering , 2020, Materials Research Express.

[21]  Kiyoshi Kanie,et al.  Single-Crystalline Protrusion-Rich Indium Tin Oxide Nanoparticles with Colloidal Stability in Water for Use in Sustainable Coatings , 2020 .

[22]  Chao Zhang,et al.  Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying , 2020 .

[23]  M. Trari,et al.  Structural and optical properties of Cu-doped ZnAl2O4 and its application as photocatalyst for Cr(VI) reduction under sunlight , 2020 .

[24]  Sam Zhang,et al.  Hard yet tough CrN/Si3N4 multilayer coatings deposited by the combined deep oscillation magnetron sputtering and pulsed dc magnetron sputtering , 2020 .

[25]  S. Hannula,et al.  Cold Gas Spraying of a High-Entropy CrFeNiMn Equiatomic Alloy , 2020, Coatings.

[26]  D. Seidman,et al.  Grain-boundary structure and segregation in Nb3Sn coatings on Nb for high-performance superconducting radiofrequency cavity applications , 2019, Acta Materialia.

[27]  M. Lei,et al.  Microstructure and thermal conductivity of Ti-Al-Si-N nanocomposite coatings deposited by modulated pulsed power magnetron sputtering , 2020 .

[28]  Jun Liu,et al.  Recent Progress of Organic-Inorganic Composite Solid Electrolytes for All-Solid-State Lithium Batteries. , 2020, Chemistry.

[29]  M. Lei,et al.  Tribological behaviors in air and seawater of CrN/TiN superlattice coatings irradiated by high-intensity pulsed ion beam , 2019 .

[30]  F. Huang,et al.  Thick CrN/AlN superlattice coatings deposited by hot filament assisted HiPIMS for solid particle erosion and high temperature wear resistance , 2019, Surface and Coatings Technology.

[31]  S. Konovalov,et al.  Improvement of copper alloy properties in electro-explosive spraying of ZnO-Ag coatings resistant to electrical erosion , 2019, Journal of Materials Research and Technology.

[32]  V. Grudinin,et al.  The properties of Cu films deposited by high rate magnetron sputtering from a liquid target , 2019, Vacuum.

[33]  Weitao Zheng,et al.  Optical coatings of durability based on transition metal nitrides , 2019, Thin Solid Films.

[34]  J. Luo,et al.  Scratch response and tribological properties of TiAlSiN coatings deposited by reactive deep oscillation magnetron sputtering , 2019, Materials Research Express.

[35]  Jie Liu,et al.  Study on graphene modified organic anti-corrosion coatings: A comprehensive review , 2019, Journal of Alloys and Compounds.

[36]  Jun Woo Kim,et al.  Fabrication of yttria-stabilized zirconia aerogel for high-performance thermal barrier coating , 2019, Journal of Alloys and Compounds.

[37]  M. Liao,et al.  Comparison of microstructures and magnetic properties in FePt alloy films deposited by direct current magnetron sputtering and high power impulse magnetron sputtering , 2019, Journal of Alloys and Compounds.

[38]  M. Somers,et al.  Co-existence of γ'N phase and γN phase on nitrided austenitic Fe–Cr–Ni alloys- I. experiment , 2019, Acta Materialia.

[39]  K. Sridharan,et al.  Radiation response of Ti2AlC MAX phase coated Zircaloy-4 for accident tolerant fuel cladding , 2019, Journal of Nuclear Materials.

[40]  Mao Wang,et al.  Interface stability, mechanical and corrosion properties of AlCrMoNbZr/(AlCrMoNbZr)N high-entropy alloy multilayer coatings under helium ion irradiation , 2019, Applied Surface Science.

[41]  Jing Feng,et al.  Thermal expansion performance and intrinsic lattice thermal conductivity of ferroelastic RETaO 4 ceramics , 2019, Journal of the American Ceramic Society.

[42]  R. Wood,et al.  Cavitation erosion performance of CrAlYN/CrN nanoscale multilayer coatings deposited on Ti6Al4V by HIPIMS , 2019, Journal of Alloys and Compounds.

[43]  Xin Cao,et al.  Sand particle erosion resistance of the multilayer gradient TiN/Ti coatings on Ti6Al4V alloy , 2019, Surface and Coatings Technology.

[44]  Z.T. Jiang,et al.  Scratch behavior and FEM modelling of Cu/Si(100) thin films deposited by modulated pulsed power magnetron sputtering , 2019, Surface and Coatings Technology.

[45]  M. Bilek,et al.  Transparent Conductive Dielectric-Metal-Dielectric Structures for Electrochromic Applications Fabricated by High-Power Impulse Magnetron Sputtering. , 2019, ACS applied materials & interfaces.

[46]  E. Shchukina,et al.  Nanocontainer-based self-healing coatings: current progress and future perspectives. , 2019, Chemical communications.

[47]  Qiang Chen,et al.  Recent progress on high power impulse magnetron sputtering (HiPIMS): The challenges and applications in fabricating VO2 thin film , 2019, AIP Advances.

[48]  K. Sadasivuni,et al.  Self – cleaning superhydrophobic coatings: Potential industrial applications , 2019, Progress in Organic Coatings.

[49]  Jianliang Lin.  High rate reactive sputtering of Al2O3 coatings by HiPIMS , 2019, Surface and Coatings Technology.

[50]  B. Zheng,et al.  Flexible hard TiAlSiN nanocomposite coatings deposited by modulated pulsed power magnetron sputtering with controllable peak power , 2019, Thin Solid Films.

[51]  V. Ovcharenko,et al.  Irradiation resistance of vacuum arc chromium coatings for zirconium alloy fuel claddings , 2018, Journal of Nuclear Materials.

[52]  Zhihong Yang,et al.  Achieving good infrared-radar compatible stealth property on metamaterial-based absorber by controlling the floating rate of Al type infrared coating , 2018, Journal of Alloys and Compounds.

[53]  F. Huang,et al.  Microstructural evolution of epitaxial Ti3AlC2 film on sapphire under ion irradiation and nanoindentation-induced deformation , 2018, Journal of Nuclear Materials.

[54]  J. Juang,et al.  Surface Analysis and Optical Properties of Cu-Doped ZnO Thin Films Deposited by Radio Frequency Magnetron Sputtering , 2018, Coatings.

[55]  H. Terryn,et al.  Triple-Action Self-Healing Protective Coatings Based on Shape Memory Polymers Containing Dual-Function Microspheres. , 2018, ACS applied materials & interfaces.

[56]  Jieyan Yuan,et al.  Phase stability, thermo-physical properties and thermal cycling behavior of plasma-sprayed CTZ, CTZ/YSZ thermal barrier coatings , 2018, Ceramics International.

[57]  M. Belmahi,et al.  Composition and optical properties tunability of hydrogenated silicon carbonitride thin films deposited by reactive magnetron sputtering , 2018, Applied Surface Science.

[58]  M. Lei,et al.  Microstructure and tribological behavior of TiAlSiN coatings deposited by deep oscillation magnetron sputtering , 2018, Journal of the American Ceramic Society.

[59]  T. Matikas,et al.  Development and Characterization of High Performance Shape Memory Alloy Coatings for Structural Aerospace Applications , 2018, Materials.

[60]  Jing Feng,et al.  Synthesis and thermophysical properties of RETa3O9 (RE = Ce, Nd, Sm, Eu, Gd, Dy, Er) as promising thermal barrier coatings , 2018 .

[61]  Yadong Jiang,et al.  Optimization of metal-to-insulator phase transition properties in polycrystalline VO2 films for terahertz modulation applications by doping , 2018 .

[62]  Chao Li,et al.  New design for highly durable infrared-reflective coatings , 2017, Light: Science & Applications.

[63]  S. Bals,et al.  Exploring the Optical and Morphological Properties of Ag and Ag/TiO2 Nanocomposites Grown by Supersonic Cluster Beam Deposition , 2017, Nanomaterials.

[64]  P. Chu,et al.  Corrosion behavior of reactive sputtered Ti/TiN nanostructured coating and effects of intermediate titanium layer on self-healing properties , 2017 .

[65]  L. Sirghi,et al.  High visible light photocatalytic activity of nitrogen-doped ZnO thin films deposited by HiPIMS , 2017 .

[66]  Arnaud Magrez,et al.  Elevated transition temperature in Ge doped VO2 thin films , 2017 .

[67]  A. Solovyev,et al.  Properties of ultra-thin Cu films grown by high power pulsed magnetron sputtering , 2017 .

[68]  Jianliang Lin,et al.  Thick diamond like carbon coatings deposited by deep oscillation magnetron sputtering , 2017 .

[69]  A. Anders.  Tutorial: Reactive high power impulse magnetron sputtering (R-HiPIMS) , 2017 .

[70]  A. Kildishev,et al.  Temperature-Dependent Optical Properties of Plasmonic Titanium Nitride Thin Films , 2017, 1702.03053.

[71]  Yanwen Zhou,et al.  Tribocorrosion behaviors of CrN coating in 3.5wt% NaCl solution , 2017 .

[72]  Kezhong Wang,et al.  Modification of Al pigment with graphene for infrared/visual stealth compatible fabric coating , 2017 .

[73]  Wenxiu Liu,et al.  Infrared emissivity properties of infrared stealth coatings prepared by water-based technologies , 2016 .

[74]  Jun Ma,et al.  All solid-state polymer electrolytes for high-performance lithium ion batteries , 2016 .

[75]  O. Ivasishin,et al.  Irradiation resistance, microstructure and mechanical properties of nanostructured (TiZrHfVNbTa)N coatings , 2016 .

[76]  W. Sproul,et al.  Structure, adhesion and corrosion behavior of CrN/TiN superlattice coatings deposited by the combined deep oscillation magnetron sputtering and pulsed dc magnetron sputtering , 2016 .

[77]  M. Yasir,et al.  Effect of TiC self-healing coatings on the cyclic oxidation resistance and lifetime of thermal barrier coatings , 2016 .

[78]  W. Sproul,et al.  Mechanical and tribological properties of CrN/TiN superlattice coatings deposited by a combination of arc-free deep oscillation magnetron sputtering with pulsed dc magnetron sputtering , 2015 .

[79]  W. Sproul,et al.  Wear and corrosion resistance of CrN/TiN superlattice coatings deposited by a combined deep oscillation magnetron sputtering and pulsed dc magnetron sputtering , 2015 .

[80]  Jianliang Lin,et al.  The structure, oxidation resistance, mechanical and tribological properties of CrTiAlN coatings , 2015 .

[81]  W. Sproul,et al.  Structure and properties of Cr2O3 coatings deposited using DCMS, PDCMS, and DOMS , 2015 .

[82]  W. Sproul,et al.  Mechanical and tribological properties of CrN/TiN multilayer coatings deposited by pulsed dc magnetron sputtering , 2015 .

[83]  J. Musil.  Flexible hard nanocomposite coatings , 2015 .

[84]  M. Lei,et al.  On the pressure effect in energetic deposition of Cu thin films by modulated pulsed power magnetron sputtering: A global plasma model and experiments , 2015 .

[85]  Wei Liu,et al.  Enhanced ionic conductivity in magnetron-sputtered Ce0.8Sm0.2O2-δ/Al2O3 multilayers , 2015 .

[86]  A. Cavaleiro,et al.  Tailoring the nanostructure of Ti–Si–N thin films by HiPIMS in deep oscillation magnetron sputtering (DOMS) mode , 2015 .

[87]  W. Sproul,et al.  Diamond like carbon films deposited by HiPIMS using oscillatory voltage pulses , 2014 .

[88]  Lin Liu,et al.  Fe-based amorphous coatings: Structures and properties , 2014 .

[89]  Keun-Ho Choi,et al.  A shape-deformable and thermally stable solid-state electrolyte based on a plastic crystal composite polymer electrolyte for flexible/safer lithium-ion batteries , 2014 .

[90]  C. Zou,et al.  Effects of Cr concentrations on the microstructure, hardness, and temperature-dependent tribological properties of Cr-DLC coatings , 2013 .

[91]  H. Möhwald,et al.  A Coat of Many Functions , 2013, Science.

[92]  C. Mitterer,et al.  Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: A review , 2013 .

[93]  R. Turan,et al.  ZnO Nanorods as Antireflective Coatings for Industrial‐Scale Single‐Crystalline Silicon Solar Cells , 2013 .

[94]  W. Sproul,et al.  Anatase and rutile TiO2 films deposited by arc-free deep oscillation magnetron sputtering , 2013 .

[95]  Liping Xu,et al.  Characteristics and cytocompatibility of biodegradable polymer film on magnesium by spin coating. , 2012, Colloids and surfaces. B, Biointerfaces.

[96]  S. Hopkins,et al.  Ink-jet printing of YBa2Cu3O7 superconducting coatings and patterns from aqueous solutions , 2012 .

[97]  Sam Zhang,et al.  Toughness evaluation of hard coatings and thin films , 2012 .

[98]  Kazuhiko Maeda,et al.  Photocatalytic water splitting using semiconductor particles: History and recent developments , 2011 .

[99]  E. Wachsman,et al.  Lowering the Temperature of Solid Oxide Fuel Cells , 2011, Science.

[100]  Y. Hatanaka,et al.  Transport and recombination of photo-carriers under potential fluctuation in TiOx films prepared by rf magnetron sputtering method , 2011 .

[101]  M. Lei,et al.  Wear and corrosion properties of plasma-based low-energy nitrogen ion implanted titanium , 2011 .

[102]  W. Sproul,et al.  Recent advances in modulated pulsed power magnetron sputtering for surface engineering , 2011 .

[103]  P. Nagy,et al.  Endurance of TiAlSiN coatings: Effect of Si and bias on wear and adhesion , 2011 .

[104]  Sheng-Min Yang,et al.  High temperature oxidation behavior of multicomponent TiAlSiN coatings , 2010 .

[105]  K. Kadyrzhanov,et al.  Stability of Ti–Zr–N coatings under Xe-ion irradiation , 2010 .

[106]  F. Zhao,et al.  Thermal stability of nanostructured 13 wt% Al2O3–8 wt% Y2O3–ZrO2 thermal barrier coatings , 2010 .

[107]  F. Marciano,et al.  Antibacterial activity of DLC films containing TiO2 nanoparticles. , 2009, Journal of colloid and interface science.

[108]  M. Farle,et al.  Single-Crystalline Co Nanowires: Synthesis, Thermal Stability, and Carbon Coating , 2009 .

[109]  U. Helmersson,et al.  On the electron energy in the high power impulse magnetron sputtering discharge , 2009 .

[110]  E. Oks,et al.  Evolution of the plasma composition of a high power impulse magnetron sputtering system studied with a time-of-flight spectrometer , 2009 .

[111]  C E Bottani,et al.  Nanostructured Ag4O4 films with enhanced antibacterial activity , 2008, Nanotechnology.

[112]  S J Pennycook,et al.  Colossal Ionic Conductivity at Interfaces of Epitaxial ZrO2:Y2O3/SrTiO3 Heterostructures , 2008, Science.

[113]  Andrew C. Phillips,et al.  Progress toward high-performance reflective and anti-reflection coatings for astronomical optics , 2008, Astronomical Telescopes + Instrumentation.

[114]  Kenneth Holmberg,et al.  Tribological coatings: contact mechanisms and selection , 2007 .

[115]  Yongqiang Wang,et al.  Ion irradiation effects in nanocrystalline TiN coatings , 2007 .

[116]  Sam Zhang,et al.  Hard yet Tough Nanocomposite Coatings – Present Status and Future Trends , 2007 .

[117]  J. Musil,et al.  Toughness of hard nanostructured ceramic thin films , 2007 .

[118]  U. Helmersson,et al.  Ionized physical vapor deposition (IPVD): A review of technology and applications , 2006 .

[119]  Steve Bull,et al.  An overview of the potential of quantitative coating adhesion measurement by scratch testing , 2006 .

[120]  D. G. Teer,et al.  The study of the adhesion of a TiN coating on steel and titanium alloy substrates using a multi-mode scratch tester , 2006 .

[121]  W. Cai,et al.  Recent development of TiNi-based shape memory alloys , 2005 .

[122]  B. Mcnamara,et al.  PECVD of biocompatible coatings on 316L stainless steel , 2005 .

[123]  J. Alami,et al.  Plasma dynamics in a highly ionized pulsed magnetron discharge , 2005 .

[124]  X. Zhu,et al.  Plasma-based low-energy ion implantation of austenitic stainless steel for improvement in wear and corrosion resistance , 2005 .

[125]  S. Malakpour,et al.  SYNTHESIS AND CHARACTERIZATION OF SILICONE MODIFIED ACRYLIC RESIN AND USES IN THE EMULSION PAINTS , 2005 .

[126]  Pierre Fauchais,et al.  Understanding plasma spraying , 2004 .

[127]  C. Park,et al.  Deposition and mechanical evaluation of superhard Ti–Al–Si–N nanocomposite films by a hybrid coating system , 2004 .

[128]  J. Cizek,et al.  Mechanical and optical properties of hard SiCN coatings prepared by PECVD , 2004 .

[129]  Hamid Assadi,et al.  Bonding mechanism in cold gas spraying , 2003 .

[130]  Robert Vassen,et al.  Thermal Conductivity and Thermal Expansion Coefficients of the Lanthanum Rare‐Earth‐Element Zirconate System , 2003 .

[131]  Hajime Miyashiro,et al.  All-solid-state lithium secondary battery with ceramic/polymer composite electrolyte , 2002 .

[132]  A. Boudghene Stambouli,et al.  Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy , 2002 .

[133]  P. Martin.  Review of the filtered vacuum arc process and materials deposition , 2001 .

[134]  Anthony G. Evans,et al.  Mechanisms controlling the durability of thermal barrier coatings , 2001 .

[135]  A. Matthews,et al.  On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour , 2000 .

[136]  Andrey A. Voevodin,et al.  Supertough wear-resistant coatings with ‘chameleon’ surface adaptation , 2000 .

[137]  N. Imanishi,et al.  Ferroelectric Materials as a Ceramic Filler in Solid Composite Polyethylene Oxide‐Based Electrolytes , 2000 .

[138]  J. Schneider,et al.  A novel pulsed magnetron sputter technique utilizing very high target power densities , 1999 .

[139]  G. Pharr.  Measurement of mechanical properties by ultra-low load indentation , 1998 .

[140]  S. Radhakrishna,et al.  Heat‐resistant anti‐corrosive paint from epoxy‐silicone vehicles , 1997 .

[141]  Charles M. Lieber,et al.  Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes , 1997 .

[142]  W. Sproul.  Reactive sputter deposition of polycrystalline nitride and oxide superlattice coatings , 1996 .

[143]  W. Sproul.  New Routes in the Preparation of Mechanically Hard Films , 1996, Science.

[144]  Philip J. Martin,et al.  Practical measurement of the residual stress in coatings , 1996 .

[145]  J. Vetter.  Vacuum arc coatings for tools: potential and application , 1995 .

[146]  G. Berg,et al.  Evaluation of PVD nitride coatings, using impact, scratch and Rockwell-C adhesion tests , 1995 .

[147]  T. Bell,et al.  Structure and Corrosion Resistance of Plasma Nitrided Stainless Steel , 1985, Stainless Steel 2000.

[148]  A. Evans,et al.  Elastic/Plastic Indentation Damage in Ceramics: The Lateral Crack System , 1982 .

[149]  B. Lawn,et al.  Hardness, Toughness, and Brittleness: An Indentation Analysis , 1979 .

[150]  B. Lawn,et al.  An Indentation Technique for Measuring Stresses in Tempered Glass Surfaces , 1977 .

[151]  P. Gupta,et al.  Contact Stresses Between an Elastic Cylinder and a Layered Elastic Solid , 1974 .

[152]  G. Stoney.  The Tension of Metallic Films Deposited by Electrolysis , 1909 .