Failure behaviour of honeycomb sandwich corner joints and inserts

Abstract In nearly all sandwich constructions certain types of joints have to be used for assembly, but little is known about their failure behaviour. This paper deals with the investigation of the mechanical behaviour of three different corner joints as a right-angled connection of two sandwich panels and of two different potted inserts as a localised load introduction in Nomex ® honeycomb sandwich structures with glass fibre-reinforced composite skins. For this purpose, experimental test series were conducted including shear tests and bending tests of the corner joints and pull-out as well as shear-out tests of the threaded inserts. The failure mechanisms and sequences are described for each load case and the influence of the different designs and of the loading rate is discussed. Based on these characteristics, finite element simulation models were developed in LS-DYNA, which are able to represent the respective failure behaviours.

[1]  Sebastian Heimbs,et al.  Sandwichstrukturen mit Wabenkern: Experimentelle und numerische Analyse des Schädigungsverhaltens unter statischer und kurzzeitdynamischer Belastung , 2008 .

[2]  Hsien-Yang Yeh,et al.  Failure Analyses of Polymer Matrix Composite (PMC) Honeycomb Sandwich Joint Panels , 2004 .

[3]  Mark Battley,et al.  Strength Variability of Inserts in Sandwich Panels , 2009 .

[4]  Charalampos Baniotopoulos,et al.  The paramount role of joints into the reliable response of structures : from the classic pinned and rigid joints to the notion of semi-rigidity , 2000 .

[5]  Torgeir Moan,et al.  Experimental and Numerical Study of Composite T-Joints , 1996 .

[6]  S. M. Grove,et al.  Strength of Sandwich Panel ‘Cut and Fold’ Joints: , 2003 .

[7]  F. L. Matthews,et al.  Load attachment for honeycomb panels in racing cars , 1995 .

[8]  R. A. Shenoi,et al.  Design of joints and attachments in FRP ships' structures , 1994 .

[9]  B. Castanié,et al.  Experimental and Numerical Analysis of Inserts in Sandwich Structures , 2005 .

[10]  D. Zenkert,et al.  Handbook of Sandwich Construction , 1997 .

[11]  Claus Burchardt,et al.  Fatigue of sandwich structures with inserts , 1997 .

[12]  Ole Thybo Thomsen,et al.  Local effects in the vicinity of inserts in sandwich panels , 2004 .

[13]  Carmine Pappalettere,et al.  An experimental investigation of static and fatigue behaviour of sandwich composite panels joined by fasteners , 2001 .

[14]  Dai Gil Lee,et al.  Characteristics of joining inserts for composite sandwich panels , 2008 .

[15]  Aage Lystrup,et al.  Design and test of lightweight sandwich T-joint for naval ships , 2005 .

[16]  Jean-François Ferrero,et al.  Analyse d'inserts pour les structures sandwich composites , 2000 .

[17]  Edward W. Kuenzi,et al.  Supplement to stresses induced in a sandwich panel by load applied at an insert , 1955 .

[18]  Ole Thybo Thomsen,et al.  Analysis and design of sandwich plates with inserts : a high-order sandwich plate theory approach , 1998 .

[19]  M. Alexander Roth.  Strukturelles Nähen: Ein Verfahren zur Armierung von Krafteinleitungen für Sandwich-Strukturen aus Faser-Kunststoff-Verbund , 2005 .

[20]  Peter Middendorf,et al.  Strain rate effects in phenolic composites and phenolic-impregnated honeycomb structures , 2007 .

[21]  Ole Thybo Thomsen,et al.  Development of a Design Tool for Initial Analysis of Inserts in Sandwich Structures , 2008 .

[22]  R. J. Murphy,et al.  Geometric considerations in the design of honeycomb sandwich fasteners. , 1966 .

[23]  G Richardson,et al.  Optimization of bolted joints connecting honeycomb panels , 2007 .

[24]  Jin-Hwe Kweon,et al.  An experimental study of the insert joint strength of composite sandwich structures , 2008 .

[25]  T. Gänsicke,et al.  Lebensdauerbestimmung von Inserts in Aluminium-Sandwichplatten , 1995 .

[26]  L. Mcgarva,et al.  Insert Integration in Thermoplastic-Based Foam Core Sandwich Components , 1999 .

[27]  Ole Thybo Thomsen,et al.  Sandwich Plates with "Through-the-Thickness" and "Fully-Potted" inserts: Evaluation of Differences in Structural Performance , 1997 .

[28]  Keith Noakes.  Successful Composite Techniques , 1989 .