Damping of Torsional Vibrations in Two-Mass System Using Adaptive Sliding Neuro-Fuzzy Approach

In this paper, a new robust control system with the adaptive sliding neuro-fuzzy speed controller for the drive system with the flexible joint is proposed. A model reference adaptive control structure (MRAC) is used in this drive system. The torsional vibrations are successfully suppressed in the control structure with only one basic feedback from the motor speed. The damping ability of the proposed system has been confirmed for a wide range of the system parameters and compared with the other control concepts, like the adaptive Pi-type neuro-fuzzy controller and the classical cascade PI structure.

[1]  Robert D. Lorenz,et al.  Resonant load control methods for industrial servo drives , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[2]  M.A. Valenzuela,et al.  Evaluation of torsional oscillations in paper machine sections , 2004, IEEE Transactions on Industry Applications.

[3]  K. Peter,et al.  Robust output-feedback H/sub /spl infin//-control with a nonlinear observer for a two-mass system , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[4]  Yoichi Hori,et al.  Vibration suppression in 2- and 3-mass system based on the feedback of imperfect derivative of the estimated torsional torque , 1996, IEEE Trans. Ind. Electron..

[5]  T. Orlowska-Kowalska,et al.  Adaptive Control of Two-Mass System using Nonlinear Extended Kalman Filter , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[6]  Yakov Frayman,et al.  A dynamically generated fuzzy neural network and its application to torsional vibration control of tandem cold rolling mill spindles , 2002 .

[7]  Teresa Orlowska-Kowalska,et al.  Vibration Suppression in a Two-Mass Drive System Using PI Speed Controller and Additional Feedbacks—Comparative Study , 2007, IEEE Transactions on Industrial Electronics.

[8]  T. Orlowska-Kowalska,et al.  Adaptive Fuzzy Sliding Mode Control of a Drive System with Flexible Joint , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[9]  B. Orlik,et al.  Robust output-feedback H/sub /spl infin//-control with a nonlinear observer for a two-mass system , 2002 .

[10]  Frank Klawonn,et al.  Fuzzy Control - Fundamentals, Stability and Design of Fuzzy Controllers , 2006, Studies in Fuzziness and Soft Computing.

[11]  Mattias Nordin,et al.  Controlling mechanical systems with backlash - a survey , 2002, Autom..

[12]  Yuichi Matsumoto,et al.  Analysis and experimental validation of force bandwidth for force control , 2003, IEEE International Conference on Industrial Technology, 2003.

[13]  K. Jezernik,et al.  Improved design of VSS controller for a linear belt-driven servomechanism , 2005, IEEE/ASME Transactions on Mechatronics.

[14]  Rached Dhaouadi,et al.  A nonlinear control method for good dynamic performance elastic drives , 1999, IEEE Trans. Ind. Electron..

[15]  Rong-Jong Wai,et al.  Motion Control of Linear Induction Motor via Petri Fuzzy Neural Network , 2007, IEEE Transactions on Industrial Electronics.

[16]  Okyay Kaynak,et al.  A study on robustness property of sliding-mode controllers: a novel design and experimental investigations , 1999, IEEE Trans. Ind. Electron..

[17]  Seung-Ki Sul,et al.  Kalman filter and LQ based speed controller for torsional vibration suppression in a 2-mass motor drive system , 1995, IEEE Trans. Ind. Electron..

[18]  R. Dhaouadi,et al.  Two-degree-of-freedom robust speed controller for high performance rolling mill drives , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[19]  Yoichi Hori,et al.  Slow resonance ratio control for vibration suppression and disturbance rejection in torsional system , 1999, IEEE Trans. Ind. Electron..

[20]  Mark Sumner,et al.  Control of an AC Dynamometer for Dynamic Emulation of Mechanical Loads With Stiff and Flexible Shafts , 2006, IEEE Transactions on Industrial Electronics.

[21]  Junji Furusho,et al.  Speed control of two-inertia system by PI/PID control , 1999, Proceedings of the IEEE 1999 International Conference on Power Electronics and Drive Systems. PEDS'99 (Cat. No.99TH8475).

[22]  Ronald R. Yager,et al.  Essentials of fuzzy modeling and control , 1994 .

[23]  Teresa Orlowska-Kowalska,et al.  Control of the Drive System With Stiff and Elastic Couplings Using Adaptive Neuro-Fuzzy Approach , 2007, IEEE Transactions on Industrial Electronics.

[24]  K. Jezernik,et al.  Improved design of VSS controller for a linear belt-driven servomechanism , 2004, The 8th IEEE International Workshop on Advanced Motion Control, 2004. AMC '04..

[25]  Slobodan N. Vukosavic,et al.  Suppression of torsional oscillations in a high-performance speed servo drive , 1998, IEEE Trans. Ind. Electron..

[26]  Vadim I. Utkin,et al.  Direct torsion control of flexible shaft in an observer-based discrete-time sliding mode , 1998, IEEE Trans. Ind. Electron..

[27]  Okyay Kaynak,et al.  Sliding Mode Neuro-Adaptive Control of Electric Drives , 2007, IEEE Transactions on Industrial Electronics.

[28]  J. M. Pacas,et al.  Automatic identification and damping of torsional vibrations in high-dynamic-drives , 2000, ISIE'2000. Proceedings of the 2000 IEEE International Symposium on Industrial Electronics (Cat. No.00TH8543).

[29]  T. Orlowska-Kowalska,et al.  Optimization of fuzzy-logic speed controller for DC drive system with elastic joints , 2004, IEEE Transactions on Industry Applications.

[30]  Christopher M. Bingham,et al.  High-Performance Control of Dual-Inertia Servo-Drive Systems Using Low-Cost Integrated SAW Torque Transducers , 2006, IEEE Transactions on Industrial Electronics.