Effect of Thickness and Hydrophobic Polymer Content of the Gas Diffusion Layer on Electrode Flooding Level in a PEMFC

The effect of thickness and wetproof level of the gas diffusion layer on electrode flooding and cell performance was investigated. Three types of gas diffusion media were tested: SGL SIGRACET carbon papers, with and without a microporous layer, and Toray TGPH carbon paper without a microporous layer. Overall, it was found that SGL carbon paper with the microporous layer gave the best fuel cell performance even at low air stoichiometries. It was also found that adding poly(tetralluoroethylene) (PTFE) to the gas diffusion layer could enhance gas transport and water transport when a cell operates under flooding condition, but excessive PTFE loading could lead to a high flooding level in the catalyst layer. It is our opinion that a combination of hydrophobic pores for gas transport and hydrophilic pores for liquid water transport within the macroporous layer is needed. It is also our opinion that the optimal ratio of hydrophobic and hydrophilic pores depends on the pore size and its distribution. Finally, it was observed that without the microporous layer, thinner gas diffusion materials were more sensitive to liquid water accumulation than the thicker ones.

[1]  Comparison of Electrode Backing Materials for Polymer Electrolyte Membrane Fuel Cells , 2003 .

[2]  Chao-Yang Wang,et al.  Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells , 2004 .

[3]  James M. Fenton,et al.  Characterization of Gas Diffusion Layers for PEMFC , 2004 .

[4]  Chao-Yang Wang,et al.  Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell , 2004 .

[5]  E. Ticianelli,et al.  Effects of the cathode gas diffusion layer characteristics on the performance of polymer electrolyte fuel cells , 2002 .

[6]  Adam Z. Weber,et al.  Effects of Microporous Layers in Polymer Electrolyte Fuel Cells , 2005 .

[7]  T. Nguyen,et al.  Two-phase flow model of the cathode of PEM fuel cells using interdigitated flow fields , 2000 .

[8]  M. Hori,et al.  Novel gas diffusion layer with water management function for PEMFC , 2004 .

[9]  Tae-Hee Lee,et al.  A study on the characteristics of the diffusion layer thickness and porosity of the PEMFC , 2004 .

[10]  G. Maggio,et al.  Influence of electrodic properties on water management in a solid polymer electrolyte fuel cell , 1992 .

[11]  T. Nguyen,et al.  Modeling Liquid Water Effects in the Gas Diffusion and Catalyst Layers of the Cathode of a PEM Fuel Cell , 2004 .

[12]  G. Squadrito,et al.  Effects of the Diffusion Layer Characteristics on the Performance of Polymer Electrolyte Fuel Cell Electrodes , 2001 .

[13]  J. Song,et al.  Optimal composition of polymer electrolyte fuel cell electrodes determined by the AC impedance method , 2001 .

[14]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .

[15]  E. Passalacqua,et al.  Influence of the PTFE content in the diffusion layer of low-Pt loading electrodes for polymer electrolyte fuel cells , 1998 .

[16]  Chang-Soo Kim,et al.  Effect of PTFE contents in the gas diffusion media on the performance of PEMFC , 2004 .

[17]  A. Shukla,et al.  Effect of diffusion-layer morphology on the performance of polymer electrolyte fuel cells operating at atmospheric pressure , 2000 .

[18]  Edson A. Ticianelli,et al.  Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells , 1996 .

[19]  Zhigang Qi,et al.  Enhancement of PEM fuel cell performance by steaming or boiling the electrode , 2002 .

[20]  Trung Van Nguyen,et al.  Three-dimensional effects of liquid water flooding in the cathode of a PEM fuel cell , 2003 .

[21]  D. Bevers,et al.  Examination of the influence of PTFE coating on the properties of carbon paper in polymer electrolyte fuel cells , 1996 .

[22]  A. Shukla,et al.  Diffusion layer parameters influencing optimal fuel cell performance , 2000 .

[23]  Trung Van Nguyen,et al.  Diagnostic Tool to Detect Electrode Flooding in Proton-Exchange-Membrane Fuel Cells , 2003 .

[24]  Jin Hyun Nam,et al.  Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium , 2003 .