Preparation and characterization of layered silicate/glass fiber/epoxy hybrid nanocomposites via vacuum-assisted resin transfer molding (VARTM)

Layered silicate/glass fiber/epoxy hybrid composites were successfully prepared using a vacuum-assisted resin transfer molding (VARTM) process. To study the effects of the fiber direction on the clay distribution in the hybrid composites, unidirectional glass fibers were placed in two directions: parallel and perpendicular to the resin flow direction. The intercalation behavior of the clay and the morphology of the composites were investigated using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The complementary use of XRD and TEM techniques revealed an intercalated clay structure in the composites. Dispersion of clay in the composites was also observed using scanning electron microscopy (SEM); the observed clays were dispersed between both the bundles of glass fibers and within the interstices of the fiber filaments. The mechanical properties of the ternary composites were evaluated. The results indicated that introducing a small amount of organoclay to the glass fiber/epoxy composites enhanced their mechanical and thermal properties, confirming the synergistic effects of glass fibers and clays in the composites.

[1]  Derrick Dean,et al.  S2-Glass/Epoxy Polymer Nanocomposites: Manufacturing, Structures, Thermal and Mechanical Properties , 2003 .

[2]  S. Picken,et al.  Fibre–matrix adhesion in glass-fibre reinforced polyamide-6 silicate nanocomposites , 2005 .

[3]  Yiu-Wing Mai,et al.  Influence of aspect ratio on barrier properties of polymer-clay nanocomposites. , 2005, Physical review letters.

[4]  Suprakas Sinha Ray,et al.  POLYMER/LAYERED SILICATE NANOCOMPOSITES: A REVIEW FROM PREPARATION TO PROCESSING , 2003 .

[5]  P. Powell,et al.  Engineering with Fibre-Polymer Laminates , 1993 .

[6]  G. Simon,et al.  Thermal stability and water uptake of high performance epoxy layered silicate nanocomposites , 2004 .

[7]  A. Kinloch,et al.  Mechanical and fracture properties of epoxy/inorganic micro- and nano-composites , 2003 .

[8]  T. Pinnavaia,et al.  Thermoset Epoxy–Clay Nanocomposites: The Dual Role of α,ω-Diamines as Clay Surface Modifiers and Polymer Curing Agents , 2002 .

[9]  M. Hussain,et al.  Effect of organo-phosphorus and nano-clay materials on the thermal and fire performance of epoxy resins , 2004 .

[10]  M. Osman,et al.  Tensile properties of polyethylene-layered silicate nanocomposites , 2005 .

[11]  Yong Han,et al.  Reinforcing hydroxyapatite/thermosetting epoxy composite with 3-D carbon fiber fabric through RTM processing , 2004 .

[12]  J. Lee,et al.  Intercalation behavior of polyimide/organoclay nanocomposites during thermal imidization , 2004 .

[13]  Robert Sporken,et al.  Polymer-layered silicate–carbon nanotube nanocomposites: unique nanofiller synergistic effect , 2004 .

[14]  Yi Xiao-su,et al.  Study on intercalation and exfoliation behavior of organoclays in epoxy resin , 2001 .

[15]  Chenggang Chen,et al.  PREPARATION, CHARACTERIZATION AND NANOSTRUCTURAL EVOLUTION OF EPOXY NANOCOMPOSITES , 2003 .

[16]  J. Lee,et al.  Preparing PP/clay nanocomposites using a swelling agent , 2004 .

[17]  Leif A. Carlsson,et al.  Experimental characterization of advanced composite materials , 1987 .

[18]  J. Seferis,et al.  Nanoclay reinforcement effects on the cryogenic microcracking of carbon fiber/epoxy composites , 2002 .

[19]  A. Okada,et al.  Synthesis and properties of polyimide-clay hybrid films , 1997 .

[20]  K. Wei,et al.  Effect of material and process variables on the performance of resin-transfer-molded epoxy fabric composites , 2000 .

[21]  G. Simon,et al.  Fabrication of phosphorus-clay polymer nanocomposites for fire performance , 2003 .

[22]  Hsu-Chiang Kuan,et al.  Mechanical, thermal and morphological properties of glass fiber and carbon fiber reinforced polyamide-6 and polyamide-6/clay nanocomposites , 2001 .

[23]  Jie Yin,et al.  Polyimide/montmorillonite nanocomposites based on thermally stable, rigid-rod aromatic amine modifiers , 2003 .