Integrated solar thermal Brayton cycles with either one or two regenerative heat exchangers for maximum power output

The main objective of this paper is to optimise the open-air solar-thermal Brayton cycle by considering the implementation of the second law of thermodynamics and how it relates to the design of the heat exchanging components within it. These components included one or more regenerators (in the form of cross-flow heat exchangers) and the receiver of a parabolic dish concentrator where the system heat was absorbed. The generation of entropy was considered as it was associated with the destruction of exergy or available work. The dimensions of some components were used to optimise the cycles under investigation. EGM (Entropy Generation Minimisation) was employed to optimise the system parameters by considering their influence on the total generation of entropy (destruction of exergy). Various assumptions and constraints were considered and discussed. The total entropy generation rate and irreversibilities were determined by considering the individual components and ducts of the system, as well as their respective inlet and outlet conditions. The major system parameters were evaluated as functions of the mass flow rate to allow for a proper discussion of the system performance. The performances of both systems were investigated, and characteristics were listed for both. Finally, a comparison is made to shed light on the differences in performance.

[1]  Naser M. Jubeh,et al.  Exergy Analysis and Second Law Efficiency of a Regenerative Brayton Cycle with Isothermal Heat Addition , 2005, Entropy.

[2]  B. S. Petukhov.  Heat Transfer and Friction in Turbulent Pipe Flow with Variable Physical Properties , 1970 .

[3]  Sendhil Kumar Natarajan,et al.  Comparison of receivers for solar dish collector system , 2008 .

[4]  S. C. Kaushik,et al.  Exergetic analysis of a solar thermal power system , 2000 .

[5]  Mehmet Yilmaz,et al.  Performance evaluation criteria for heat exchangers based on second law analysis , 2001 .

[6]  Adrian Bejan,et al.  Entropy generation minimization in parallel‐plates counterflow heat exchangers , 2000 .

[7]  H. Tan,et al.  Radiation performance of dish solar concentrator/cavity receiver systems , 2008 .

[8]  Josua P. Meyer,et al.  Thermodynamic optimisation of the integrated design of a small‐scale solar thermal Brayton cycle , 2012 .

[9]  R. Petela.  Exergy of undiluted thermal radiation , 2003 .

[10]  A. Bejan.  Advanced Engineering Thermodynamics , 1988 .

[11]  Brian Joseph Brinkworth.  Solar energy for man , 1972 .

[12]  M. J. Moran,et al.  Thermal design and optimization , 1995 .

[13]  Sendhil Kumar Natarajan,et al.  Numerical investigation of natural convection heat loss in modified cavity receiver for fuzzy focal solar dish concentrator , 2007 .

[14]  Sendhil Kumar Natarajan,et al.  An improved model for natural convection heat loss from modified cavity receiver of solar dish concentrator , 2009 .

[15]  J. E. Hesselgreaves.  Rationalisation of second law analysis of heat exchangers , 2000 .

[16]  D. Yogi Goswami,et al.  Principles of Solar Engineering , 1978 .

[17]  R. W. Harrigan,et al.  Solar energy fundamentals and design , 1985 .

[18]  J. Richard Williams,et al.  Solar energy: technology and applications , 1974 .

[19]  Lingen Chen,et al.  Power, efficiency, entropy-generation rate and ecological optimization for a class of generalized irreversible universal heat-engine cycles , 2007 .

[20]  Andrés Agudelo,et al.  Thermal radiation and the second law , 2010 .

[21]  Shireesh B. Kedare,et al.  Investigations on heat losses from a solar cavity receiver , 2009 .

[22]  A. Bejan,et al.  Entropy Generation Through Heat and Fluid Flow , 1983 .

[23]  V. Gnielinski.  New equations for heat and mass transfer in turbulent pipe and channel flow , 1976 .