Grey-Based Taguchi Analysis for Optimization of Multi-Objective Machining Process in Turning

In the present experimental study, Taguchi method and the GRA grey relation analysis technique were used to optimize a multi-objective metal cutting process to yield maximum performance of tungsten carbide-cobalt cutting tool inserts in turning. L18 orthogonal array was selected to analyze the effect of cutting speed, feed rate and depth of cut using cryogenically treated and untreated inserts. The performance was evaluated in terms of main cutting force, power consumption, tool wear and material removal rate using main effect plots of S/N signal to noise ratios. This study indicated that grey based Taguchi technique is not only a novel, efficient and reliable method of optimization, but also contributes to satisfactory solution for multi machining objectives in turning process. It is concluded that cryogenic treated cutting tool inserts performed better. However, the feed rate affected the process performance most significantly.

[1]  Yung-Kuang Yang,et al.  Optimization of 6061T6 CNC Boring Process Using the Taguchi Method and Grey Relational Analysis , 2009 .

[2]  N Tosun,et al.  Determination of optimum parameters for multi-performance characteristics in drilling by using grey relational analysis , 2006 .

[3]  Zahari Taha,et al.  Analytical hierarchy process for the selection of advanced manufacturing technology in an aircraft industry , 2011, Int. J. Appl. Decis. Sci..

[4]  Lev V. Utkin,et al.  Combining of judgments in imprecise voting multi-criteria decision problems , 2012, Int. J. Appl. Decis. Sci..

[5]  Ugur Esme,et al.  OPTIMIZATION OF WELD BEAD GEOMETRY IN TIG WELDING PROCESS USING GREY RELATION ANALYSIS AND TAGUCHI METHOD OPTIMIZACIJA GEOMETRIJE TIG-VARKOV Z GREYJEVO ANALIZO IN TAGUCHIJEVO METODO , 2009 .

[6]  Hari Singh,et al.  Optimization of machining techniques — A retrospective and literature review , 2005 .

[7]  Sarojini Kesava Jajimoggala,et al.  Maintenance Strategy Evaluation Using ANP and Goal Programming , 2011, Int. J. Strateg. Decis. Sci..

[8]  Weerakorn Ongsakul,et al.  Multi-objective bidding strategy for GenCo using non-dominated sorting particle swarm optimisation , 2011, Int. J. Appl. Decis. Sci..

[9]  Vishal S. Sharma,et al.  Cryogenic Treatment of Tool Materials: A Review , 2010 .

[10]  Y. S. Tarng,et al.  Optimization of the electrical discharge machining process based on the Taguchi method with fuzzy logics , 2000 .

[11]  Taho Yang,et al.  The use of a grey-based Taguchi method for optimizing multi-response simulation problems , 2008 .

[12]  B. Lee,et al.  Modeling the surface roughness and cutting force for turning , 2001 .

[13]  Ahmad R. Sarfaraz,et al.  Manufacturing Complexity Analysis with Fuzzy AHP , 2012, Int. J. Strateg. Decis. Sci..

[14]  V. P. Agrawal,et al.  Optimum selection and ranking of electroplating system process parameters: Taguchi-MADM approach , 2011, Int. J. Appl. Decis. Sci..

[15]  Yi Lin,et al.  Grey Systems: Theory and Applications , 2010 .

[16]  Y. Tarng,et al.  Application of the Taguchi Method to the Optimization of the Submerged Arc Welding Process , 1998 .

[17]  Leena Suhl,et al.  A Multicriteria Multilevel Group Decision Method for Supplier Selection and Order Allocation , 2012, Int. J. Strateg. Decis. Sci..

[18]  M. Y. Wang,et al.  Parametric Optimization on Multi-Objective Precision Turning Using Grey Relational Analysis , 2008 .

[19]  Thomas L. Saaty,et al.  Fuzzy Judgments and Fuzzy Sets , 2010, Int. J. Strateg. Decis. Sci..

[20]  William Y. Fowlkes,et al.  Engineering Methods for Robust Product Design: Using Taguchi Methods in Technology and Product Development , 1995 .

[21]  G. P. Syrcos,et al.  Die casting process optimization using Taguchi methods , 2003 .

[22]  Ching-Kao Chang,et al.  Design optimization of cutting parameters for side milling operations with multiple performance characteristics , 2007 .

[23]  J. Deng,et al.  Introduction to Grey system theory , 1989 .

[24]  N. Subramani,et al.  Experimental studies on a vapour compression system using nanorefrigerants , 2012 .

[25]  R. Uthayakumar,et al.  Fuzzy Economic Production Quantity Model for Weibull Deteriorating Items with Ramp Type of Demand , 2011, Int. J. Strateg. Decis. Sci..

[26]  Chitra Sharma,et al.  Optimisation of electrical discharge machining process with CuW powder metallurgy electrode using grey relation theory , 2011 .

[27]  J. Paulo Davim,et al.  Optimisation of cutting conditions in machining of aluminium matrix composites using a numerical and experimental model , 2001 .