An industry-based survey of reliability in power electronic converters

A questionnaire survey was carried out to determine the industrial requirements and expectations of reliability in power electronic converters. According to the survey, power semiconductor devices ranked the most fragile components. It was concluded that main stresses were from the environment, transients and heavy loads, which should be considered during power electronic system design and normal operation. Further analyses suggest that power device reliability is a key issue and power electronic converter design is correlated with failure costs.

[1]  M. Musallam,et al.  Real-time compact electronic thermal modelling for health monitoring , 2007, 2007 European Conference on Power Electronics and Applications.

[2]  Eckhard Prof. Wolfgang,et al.  Advanced IGBT modules for railway traction applications : Reliability testing , 1998 .

[3]  M. Held,et al.  Fast power cycling test for insulated gate bipolar transistor modules in traction application , 1999 .

[4]  J. A. Donahue,et al.  A survey of HVDC operating and maintenance practices and their impact on reliability and performance , 1996 .

[5]  A.T. Bryant,et al.  Exploration of Power Device Reliability Using Compact Device Models and Fast Electrothermal Simulation , 2006, IEEE Transactions on Industry Applications.

[6]  S. Kotz,et al.  Correlation and dependence , 2001 .

[7]  Wolfgang Fichtner,et al.  Lifetime prediction of IGBT modules for traction applications , 2000, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059).

[8]  Giovanni Busatto,et al.  Long term reliability testing of HV-IGBT modules in worst case traction operation , 1999 .

[9]  Peter Tavner,et al.  Condition Monitoring for Device Reliability in Power Electronic Converters: A Review , 2010, IEEE Transactions on Power Electronics.

[10]  Chanan Singh,et al.  Report of Large Motor Reliability Survey of Industrial and Commercial Installations, Part II , 1985, IEEE Transactions on Industry Applications.

[11]  C. Bailey,et al.  A prognostic assessment method for power electronics modules , 2008, 2008 2nd Electronics System-Integration Technology Conference.

[12]  Eric Woirgard,et al.  Extensive fatigue investigation of solder joints in IGBT high power modules , 2000, 2000 Proceedings. 50th Electronic Components and Technology Conference (Cat. No.00CH37070).

[13]  Bin Lu,et al.  A Literature Review of IGBT Fault Diagnostic and Protection Methods for Power Inverters , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[14]  U. Scheuermann.  Reliability of pressure contacted intelligent integrated power modules , 2002, Proceedings of the 14th International Symposium on Power Semiconductor Devices and Ics.

[15]  R. W. De Doncker,et al.  Reliability Prediction for Inverters in Hybrid Electrical Vehicles , 2007 .

[16]  M. Thoben,et al.  Power Cycling at High Temperature Swings of Modules with Low Temperature Joining Technique , 2006, 2006 IEEE International Symposium on Power Semiconductor Devices and IC's.