A numerical study on damage characteristics in composite tapered laminates under cyclic loading with different stress ratios

[1]  M. Paggi,et al.  A multi phase-field-cohesive zone model for laminated composites: Application to delamination migration , 2021 .

[2]  R. Rolfes,et al.  Numerical life prediction of unidirectional fiber composites under block loading conditions using a progressive fatigue damage model , 2021 .

[3]  M. Paggi,et al.  Phase field modeling of fracture in Functionally Graded Materials: Γ-convergence and mechanical insight on the effect of grading , 2020 .

[4]  R. Rolfes,et al.  A multi phase-field fracture model for long fiber reinforced composites based on the Puck theory of failure , 2020 .

[5]  Raimund Rolfes,et al.  On the progressive fatigue failure of mechanical composite joints: Numerical simulation and experimental validation , 2020 .

[6]  W. Lee,et al.  Introduction of Developing Fatigue Load Spectrum for Full-Scale Fatigue Test of Composite Aircraft , 2020 .

[7]  Michal Petrů,et al.  Parametric Study of Flexural Strengthening of Concrete Beams with Prestressed Hybrid Reinforced Polymer , 2019, Materials.

[8]  Cristian Guillermo Gebhardt,et al.  Simultaneous ply-order, ply-number and ply-drop optimization of laminate wind turbine blades using the inverse finite element method , 2018 .

[9]  M. Quaresimin,et al.  Delamination onset in symmetric cross-ply laminates under static loads: Theory, numerics and experiments , 2017 .

[10]  P. Jeyaraj,et al.  Structural optimization of rotating tapered laminated thick composite plates with ply drop-offs , 2017 .

[11]  S. Hallett,et al.  A simplified layered beam approach for predicting ply drop delamination in thick composite laminates , 2016 .

[12]  Erik Lund,et al.  A simulation method for high‐cycle fatigue‐driven delamination using a cohesive zone model , 2016 .

[13]  Hai-Tao Fan,et al.  An optimization method for composite structures with ply-drops , 2016 .

[14]  Stephen R Hallett,et al.  Compressive failure of laminates containing an embedded wrinkle; experimental and numerical study , 2015 .

[15]  Suong V. Hoa,et al.  Tensile fatigue behavior of tapered glass fiber reinforced epoxy composites containing nanoclay , 2014 .

[16]  Francesco Aymerich,et al.  Finite element modelling of damage induced by low-velocity impact on composite laminates , 2014 .

[17]  A. Rama Mohan Rao,et al.  Hybrid shuffled frog leaping optimisation algorithm for multi-objective optimal design of laminate composites , 2013 .

[18]  Jinyang Zheng,et al.  Finite element analysis of postbuckling and delamination of composite laminates using virtual crack closure technique , 2011 .

[19]  Michael R Wisnom,et al.  A simplified approach to the damage tolerance design of asymmetric tapered laminates. Part I: Methodology development , 2010 .

[20]  Pedro P. Camanho,et al.  Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffness , 2010 .

[21]  Michael R Wisnom,et al.  An experimental and numerical investigation into the damage mechanisms in notched composites , 2009 .

[22]  José Costa,et al.  Fatigue life evaluation for carbon/epoxy laminate composites under constant and variable block loading , 2009 .

[23]  Rodney S. Thomson,et al.  Review of methodologies for composite material modelling incorporating failure , 2008 .

[24]  Philippe H. Geubelle,et al.  A cohesive model for fatigue failure of polymers , 2005 .

[25]  J. Barrau,et al.  Tapered laminates under static and fatigue tension loading , 2002 .

[26]  A. V. Krishna Murty,et al.  Analysis of laminates with ply drops , 2001 .

[27]  Suong V. Hoa,et al.  The study of tapered laminated composite structures: a review , 2000 .

[28]  Y. Kim,et al.  CONTINUUM DAMAGE MECHANICS-BASED FATIGUE MODEL OF ASPHALT CONCRETE , 2000 .

[29]  Michael R Wisnom,et al.  Delamination in Asymmetrically Tapered Composites Loaded in Tension , 1996 .

[30]  W. Cui,et al.  Failure of tapered composites under static and fatigue tension loading , 1995 .

[31]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[32]  Peng Jin,et al.  Optimal design of blended composite laminate structures using ply drop sequence , 2016 .

[33]  R. L. Riche,et al.  Optimal design of laminated composite structures with ply drops using stacking sequence tables , 2014 .

[34]  T. Siegmund,et al.  An irreversible cohesive zone model for interface fatigue crack growth simulation , 2003 .

[35]  Abhijit Mukherjee,et al.  Design guidelines for ply drop-off in laminated composite structures , 2001 .

[36]  Michael R Wisnom,et al.  Effect of step spacing on delamination of tapered laminates , 1994 .

[37]  John R. Rice,et al.  Mathematical analysis in the mechanics of fracture , 1968 .