An electrified boom actuation system with energy regeneration capability driven by a novel electro-hydraulic unit

[1]  A. Vacca,et al.  Experimental Verification of An Electro-Hydraulic Actuation System Driven by An Integrated Electro-Hydraulic Unit , 2023, International Journal of Fluid Power.

[2]  A. Vacca,et al.  A compact design for an electric driven hydraulic gear machine capable of multiple quadrant operation , 2022, Mechanism and Machine Theory.

[3]  Tatiana Minav,et al.  Utilization of electric prime movers in hydraulic heavy-duty-mobile-machine implement systems , 2021, Automation in Construction.

[4]  Tri Cuong Do,et al.  Energy saving of hybrid hydraulic excavator with innovative powertrain , 2021 .

[5]  Andrea Vacca,et al.  A Cost-Effective Electro-Hydraulic Actuator Solution with Open Circuit Architecture , 2021 .

[6]  Enrique Busquets,et al.  A high-efficient solution for electro-hydraulic actuators with energy regeneration capability , 2020 .

[7]  A. Vacca,et al.  A closed circuit electro-hydraulic actuator with energy recuperation capability , 2020, Volume 1 - Symposium.

[8]  T. Minav,et al.  Effect of Energy Recovery on Efficiency in Electro-Hydrostatic Closed System for Differential Actuator , 2020, Actuators.

[9]  Tan Lisha,et al.  The applications of energy regeneration and conversion technologies based on hydraulic transmission systems: A review , 2020 .

[10]  Zhixin Dong,et al.  Potential energy regeneration method and its engineering applications in large-scale excavators , 2019, Energy Conversion and Management.

[11]  Morten K. Ebbesen,et al.  Classification and Review of Pump-Controlled Differential Cylinder Drives , 2019, Energies.

[12]  Kyoung Kwan Ahn,et al.  Optimization of energy regeneration of hybrid hydraulic excavator boom system , 2019, Energy Conversion and Management.

[13]  Damiano Padovani,et al.  A Self-Contained Electro-Hydraulic Cylinder with Passive Load-Holding Capability , 2019, Energies.

[14]  Long Quan,et al.  A novel hydraulic excavator boom driving system with high efficiency and potential energy regeneration capability , 2018, Energy Conversion and Management.

[15]  L. Xia,et al.  Energy efficiency analysis of integrated drive and energy recuperation system for hydraulic excavator boom , 2018 .

[16]  Bradley T. Zigler,et al.  Estimating Energy Consumption of Mobile Fluid Power in the United States , 2017 .

[17]  Qihuai Chen,et al.  Review of boom potential energy regeneration technology for hydraulic construction machinery , 2017 .

[18]  P. J. Gamez-Montero,et al.  GeroMAG: In-House Prototype of an Innovative Sealed, Compact and Non-Shaft-Driven Gerotor Pump with Magnetically-Driving Outer Rotor , 2017 .

[19]  G. P. Moreda,et al.  High voltage electrification of tractor and agricultural machinery – A review , 2016 .

[20]  J. Pyrhonen,et al.  Analysis of electro-hydraulic lifting system's energy efficiency with direct electric drive pump control , 2013 .

[21]  Juha J. Pyrhönen,et al.  Permanent Magnet Synchronous Machine Sizing: Effect on the Energy Efficiency of an Electro-Hydraulic Forklift , 2012, IEEE Transactions on Industrial Electronics.

[22]  Andrea Vacca,et al.  Modelling and experimental validation of external spur gear machines for fluid power applications , 2011, Simul. Model. Pract. Theory.

[23]  Sun Hui,et al.  Hydraulic/electric synergy system (HESS) design for heavy hybrid vehicles , 2010 .

[24]  Jeffrey M. Roach,et al.  FLASH Electrohydrostatic Actuation Modeling, Analysis, and Test Results , 1997 .

[25]  Long Quan,et al.  Research on energy consumption of injection molding machine driven by five different types of electro-hydraulic power units , 2020 .

[26]  Andrea Vacca,et al.  A Design Solution for Efficient and Compact Electro-hydraulic Actuators , 2015 .

[27]  Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990 – 1997 , 1999 .