Design of 3-DOF parallel manipulators for micro-motion applications

..................................................................................................ii Acknowledgement......................................................................................iii

[1]  Fengfeng Xi,et al.  Development of a sliding-leg tripod as an add-on device for manufacturing , 2001, Robotica.

[2]  Sungchul Kang,et al.  Macro-micro manipulation with visual tracking and its application to wheel assembly , 2005 .

[3]  C. Gosselin,et al.  Kinematic Analysis and Design of Kinematically Redundant Parallel Mechanisms , 2004 .

[4]  Gregory Walsh,et al.  Kinematics of a novel three DOF translational platform , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[5]  Gary A. Mintchell.  Industrial Robots Fast, Nimble at 30 , 2002 .

[6]  Jian Wang,et al.  Workspace evaluation of Stewart platforms , 1994, Adv. Robotics.

[7]  John J. Craig Zhu,et al.  Introduction to robotics mechanics and control , 1991 .

[8]  Fengfeng Xi,et al.  Static balancing of parallel robots , 2005 .

[9]  Lung-Wen Tsai,et al.  The Kinematics of a Class of 3-DOF, 4-Legged Parallel Manipulators , 2003 .

[10]  Manfred Weck,et al.  Parallel Kinematic Machine Tools – Current State and Future Potentials , 2002 .

[11]  H. Harry Asada,et al.  Kinematic and static characterization of wrist joints and their optimal design , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[12]  Massimo Callegari,et al.  Dynamics modelling and control of the 3-RCC translational platform , 2006 .

[13]  Placid Mathew Ferreira,et al.  Computation of stiffness and stiffness bounds for parallel link manipulators 1 This research was sup , 1999 .

[14]  Kok-Meng Lee,et al.  Kinematic analysis of a three degrees of freedom in-parallel actuated manipulator , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[15]  Dan Zhang,et al.  Optimum design of parallel kinematic toolheads with genetic algorithms , 2004, Robotica.

[16]  Shang-Liang Chen,et al.  Kinematic and Singularity Analyses of a Six DOF 6-3-3 Parallel Link Machine Tool , 2000 .

[17]  Beizhi Li,et al.  Kinematics and singularity analysis of a 3-DOF parallel kinematic machine , 2005, IEEE International Conference Mechatronics and Automation, 2005.

[18]  Lihui Wang,et al.  Parallel Kinematic Machines: Design, Analysis and Simulation in an Integrated Virtual Environment , 2005 .

[19]  P. R. Ouyang,et al.  Force Balancing of Robotic Mechanisms Based on Adjustment of Kinematic Parameters , 2005 .

[20]  Huapeng Wu.  Parallel Manipulators, towards New Applications , 2008 .

[21]  M. Shoham,et al.  Geometric Interpretation of the Derivatives of Parallel Robots’ Jacobian Matrix With Application to Stiffness Control , 2003 .

[22]  G. Gogu,et al.  Rigidity analysis of T3R1 parallel robot with uncoupled kinematics , 2004 .

[23]  Nicolae Lobontiu,et al.  Compliant Mechanisms: Design of Flexure Hinges , 2002 .

[24]  Dominique Deblaise,et al.  A systematic analytical method for PKM stiffness matrix calculation , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[25]  Clément Gosselin,et al.  The agile eye: a high-performance three-degree-of-freedom camera-orienting device , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[26]  Xin-Jun Liu,et al.  Some New Parallel Mechanisms Containing the Planar Four-Bar Parallelogram , 2003, Int. J. Robotics Res..

[27]  José María Sabater,et al.  Field and service applications - Exploring deep sea by teleoperated robot - An Underwater Parallel Robot with High Navigation Capabilities , 2007, IEEE Robotics & Automation Magazine.

[28]  Clément Gosselin,et al.  Design and analysis of kinematically redundant parallel manipulators with configurable platforms , 2005, IEEE Transactions on Robotics.

[29]  Jean-Pierre Merlet,et al.  Micro parallel robot MIPS for medical applications , 2001, ETFA 2001. 8th International Conference on Emerging Technologies and Factory Automation. Proceedings (Cat. No.01TH8597).

[30]  Dan Zhang.  On stiffness improvement of the Tricept machine tool , 2005, Robotica.

[31]  Clément Gosselin,et al.  Static balancing of spatial parallel Platform mechanisms-revisited , 2000 .

[32]  Damien Chablat,et al.  Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide , 2003, IEEE Trans. Robotics Autom..

[33]  R. Clavel,et al.  A Fast Robot with Parallel Geometry , 1988 .

[34]  Lihui Wang,et al.  Conceptual development of an enhanced tripod mechanism for machine tool , 2005 .

[35]  L. W. Tsai,et al.  Robot Analysis: The Mechanics of Serial and Parallel Ma-nipulators , 1999 .

[36]  Hui Zhao,et al.  A novel 5-DOF fully parallel kinematic machine tool , 2006 .

[37]  F. Sternheim,et al.  Computation of the direct and inverse geometric models of the Delta 4 parallel robot , 1987, Robotersysteme.

[38]  S.Y.T. Lang,et al.  Kinematic and dynamic models of a tripod system with a passive leg , 2006, IEEE/ASME Transactions on Mechatronics.

[39]  Xin-Jun Liu,et al.  A new family of spatial 3-DoF fully-parallel manipulators with high rotational capability , 2005 .

[40]  S J Zhang,et al.  A general method for the stiffness analysis of manipulator mechanisms , 2000 .

[41]  Fei Renyuan,et al.  Study of an intelligent micro-manipulator , 2003 .

[42]  Takashi Suehiro,et al.  Stiffness Analysis and Design of a Compact Modified Delta Parallel Mechanism , 2004, Robotica.