X-ray computed tomography harnessed to determine 3D spacing of steel fibres in self compacting concrete (SCC) slabs

Abstract The conducted research programme was focused on fibre spacing in SFR-SCC slabs. SCC slabs with two steel fibres types and different casting points were examined. A distribution and spacing analysis of fibres has been performed. Their number and volume were evaluated along the slab main axis. The distribution of fibres in slabs cast using different techniques have been compared. The amount of fibres in the upper and lower slab halves has been analysed. The uniformity of spacing of fibres was assessed. The angles between the fibres and the beam main axis were examined. Graphical visualization using 4D spherical histograms for quick assessment of fibres orientation is also presented.

[1]  Wouter De Corte,et al.  Static and fatigue fracture mechanics properties of self-compacting concrete using three-point bending tests and wedge-splitting tests , 2014 .

[2]  J. Katzer.  Median diameter as a grading characteristic for fine aggregate cement composite designing , 2012 .

[3]  A. Perrot,et al.  Structural build-up of rigid fiber reinforced cement-based materials , 2013 .

[4]  Iqbal Marie,et al.  Towards Better Understanding of Concrete Containing Recycled Concrete Aggregate , 2013 .

[5]  Jacek Katzer,et al.  Quality and mechanical properties of engineered steel fibres used as reinforcement for concrete , 2012 .

[6]  Jin-Keun Kim,et al.  The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete , 2011 .

[7]  Sofiane Amziane,et al.  Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material , 2010 .

[8]  C. Djelal,et al.  Study of self consolidating concretes stability during their placement , 2012 .

[9]  Mariusz Ruchwa,et al.  Robustness oriented analysis of structures under extreme loads , 2011 .

[10]  Ivana Banjad Pečur,et al.  Mix design for self compacting concrete , 2009 .

[11]  J. Gołaszewski.  Influence of viscosity enhancing agent on rheology and compressive strength of superplasticized mortars , 2009 .

[12]  B. Łaźniewska-Piekarczyk.  Effect of viscosity type modifying admixture on porosity, compressive strength and water penetration of high performance self-compacting concrete , 2013 .

[13]  Stanislav Seitl,et al.  Fatigue Parameters of Cement-Based Composites with Various Types of Fibres , 2009 .

[14]  K. Pilakoutas,et al.  Fatigue resistance and cracking mechanism of concrete pavements reinforced with recycled steel fibres recovered from post-consumer tyres , 2012 .

[15]  Su-Tae Kang,et al.  The relation between fiber orientation and tensile behavior in an Ultra High Performance Fiber Reinforced Cementitious Composites (UHPFRCC) , 2011 .

[16]  J. Katzer.  Properties of Precast SFRCC Beams under Harmonic Load , 2008 .

[17]  P. K. Mehta,et al.  Concrete: Microstructure, Properties, and Materials , 2005 .

[18]  Tae Sup Yun,et al.  Determination of air-void parameters of hardened cement-based materials using X-ray computed tomography , 2012 .

[19]  Liberato Ferrara,et al.  Relationships between fibre distribution, workability and the mechanical properties of SFRC applied to precast roof elements , 2005 .

[20]  Su-Tae Kang,et al.  Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution , 2012 .

[21]  A. Steuwer,et al.  Measuring overload effects during fatigue crack growth in bainitic steel by synchrotron X-ray diffraction , 2015 .

[22]  Hajime Okamura,et al.  Self-Compacting Concrete , 2000 .

[23]  Bernhard Maidl,et al.  Steel Fibre Reinforced Concrete , 1995 .

[24]  David A Lange,et al.  Field validation of models for predicting lateral form pressure exerted by SCC , 2014 .