Dynamic-Load-Enabled Ultra-low Power Multiple-State RRAM Devices

Bipolar resistance-switching materials allowing intermediate states of wide-varying resistance values hold the potential of drastically reduced power for non-volatile memory. To exploit this potential, we have introduced into a nanometallic resistance-random-access-memory (RRAM) device an asymmetric dynamic load, which can reliably lower switching power by orders of magnitude. The dynamic load is highly resistive during on-switching allowing access to the highly resistive intermediate states; during off-switching the load vanishes to enable switching at low voltage. This approach is entirely scalable and applicable to other bipolar RRAM with intermediate states. The projected power is 12 nW for a 100 × 100 nm2 device and 500 pW for a 10 × 10 nm2 device. The dynamic range of the load can be increased to allow power to be further decreased by taking advantage of the exponential decay of wave-function in a newly discovered nanometallic random material, reaching possibly 1 pW for a 10×10 nm2 nanometallic RRAM device.

[1]  A. Sawa,et al.  Hysteretic current–voltage characteristics and resistance switching at an epitaxial oxide Schottky junction SrRuO3∕SrTi0.99Nb0.01O3 , 2004, cond-mat/0411474.

[2]  A. Sawa,et al.  Hysteretic current–voltage characteristics and resistance switching at a rectifying Ti∕Pr0.7Ca0.3MnO3 interface , 2004, cond-mat/0409657.

[3]  Philip M. Rice,et al.  Organic Materials and Thin‐Film Structures for Cross‐Point Memory Cells Based on Trapping in Metallic Nanoparticles , 2005 .

[4]  Jong-Wan Park,et al.  Influence of oxygen content on electrical properties of NiO films grown by rf reactive sputtering for resistive random-access memory applications , 2006 .

[5]  Resistive Switching Mechanisms ofV-Doped$hboxSrZrO_3$Memory Films , 2006, IEEE Electron Device Letters.

[6]  S. Kostylev,et al.  SET to RESET Programming in Phase Change Memories , 2006, IEEE Electron Device Letters.

[7]  Byung Joon Choi,et al.  Resistive Switching in Pt ∕ Al2O3 ∕ TiO2 ∕ Ru Stacked Structures , 2006 .

[8]  N. Xu,et al.  Characteristics and mechanism of conduction/set process in TiN∕ZnO∕Pt resistance switching random-access memories , 2008 .

[9]  H. Laua,et al.  Nonvolatile multilevel memory effect by resistive switching in manganite thin films , 2008 .

[10]  R. Dittmann,et al.  Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges , 2009, Advanced materials.

[11]  W. Lu,et al.  Programmable Resistance Switching in Nanoscale Two-terminal Devices , 2008 .

[12]  Qi Liu,et al.  Multilevel resistive switching with ionic and metallic filaments , 2009 .

[13]  Florian Kronast,et al.  Reversible resistive switching and multilevel recording in La0.7Sr0.3MnO3 thin films for low cost nonvolatile memories. , 2010, Nano letters.

[14]  Tseung-Yuen Tseng,et al.  Multilevel resistive switching in Ti/CuxO/Pt memory devices , 2010 .

[15]  R. Dittmann,et al.  Coexistence of Filamentary and Homogeneous Resistive Switching in Fe‐Doped SrTiO3 Thin‐Film Memristive Devices , 2010, Advanced materials.

[16]  Jae Hyuck Jang,et al.  Atomic structure of conducting nanofilaments in TiO2 resistive switching memory. , 2010, Nature nanotechnology.

[17]  R. Dittmann,et al.  Impact of Defect Distribution on Resistive Switching Characteristics of Sr2TiO4 Thin Films , 2010, Advanced materials.

[18]  H. Wong,et al.  $\hbox{Al}_{2}\hbox{O}_{3}$-Based RRAM Using Atomic Layer Deposition (ALD) With 1-$\mu\hbox{A}$ RESET Current , 2010, IEEE Electron Device Letters.

[19]  Frederick T. Chen,et al.  Low-Power and Nanosecond Switching in Robust Hafnium Oxide Resistive Memory With a Thin Ti Cap , 2010, IEEE Electron Device Letters.

[20]  Ming-Jinn Tsai,et al.  Redox Reaction Switching Mechanism in RRAM Device With Structure , 2011 .

[21]  Byung Joon Choi,et al.  Purely Electronic Switching with High Uniformity, Resistance Tunability, and Good Retention in Pt‐Dispersed SiO2 Thin Films for ReRAM , 2011, Advanced materials.

[22]  I-Wei Chen,et al.  A size-dependent nanoscale metal-insulator transition in random materials. , 2011, Nature nanotechnology.

[23]  Kinam Kim,et al.  A fast, high-endurance and scalable non-volatile memory device made from asymmetric Ta2O(5-x)/TaO(2-x) bilayer structures. , 2011, Nature materials.

[24]  Seung Chul Chae,et al.  Oxide Double‐Layer Nanocrossbar for Ultrahigh‐Density Bipolar Resistive Memory , 2011, Advanced materials.

[25]  J. Yang,et al.  Anatomy of a Nanoscale Conduction Channel Reveals the Mechanism of a High‐Performance Memristor , 2011, Advanced materials.

[26]  Byung Joon Choi,et al.  Engineering nonlinearity into memristors for passive crossbar applications , 2012 .

[27]  Byung Joon Choi,et al.  A Parallel Circuit Model for Multi‐State Resistive‐Switching Random Access Memory , 2012 .