Non-intrusive efficiency estimation of induction machines

[1]  T.G. Habetler,et al.  A Nonintrusive and In-Service Motor Efficiency Estimation Method using Air-Gap Torque with Considerations of Condition Monitoring , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[2]  T. Phumiphak,et al.  Effective Estimation of Induction Motor Field Efficiency Based on On-site Measurements , 2004 .

[3]  Dianguo Xu,et al.  Sensorless Speed Estimation for Line-connected Induction Motor Based on Recurrent Multilayer Neural Network , 2007, 2007 IEEE International Conference on Automation and Logistics.

[4]  Kay Hameyer,et al.  Comparison of standards for determining efficiency of three phase induction motors , 1999 .

[5]  T.G. Habetler,et al.  Error Analysis of Motor-Efficiency Estimation and Measurement , 2007, 2007 IEEE Power Electronics Specialists Conference.

[6]  Wenping Cao,et al.  Comparison of IEEE 112 and New IEC Standard 60034-2-1 , 2008, IEEE Transactions on Energy Conversion.

[7]  Azzedine Bendiabdellah,et al.  CAGE MOTOR FAULTS DETECTION ALGORITHM USING SPEED ESTIMATION AND CURRENT ANALYSIS , 2007 .

[8]  Wenping Cao.  Assessment of induction machine efficiency with comments on new standard IEC 60034-2-1 , 2008, 2008 18th International Conference on Electrical Machines.

[9]  Wim Deprez,et al.  Increasing induction motor drives efficiency: understanding the pitfalls , 2005 .

[10]  J. S. Hsu,et al.  Field assessment of induction motor efficiency through air-gap torque , 1996 .

[11]  P. C. Sen,et al.  Principles of Electric Machines and Power Electronics , 1989 .

[12]  A. von Jouanne,et al.  Assessment of nonintrusive motor efficiency estimators , 2005, IEEE Transactions on Industry Applications.

[13]  J.D. Kueck.  Development of a method for estimating motor efficiency and analyzing motor condition , 1998, Conference Record of 1998 Annual Pulp and Paper Industry Technical Conference (Cat. No.98CH36219).

[14]  T. G. Habetler,et al.  An Evaluation of Model-Based Stator Resistance Estimation for Induction Motor Stator Winding Temperature Monitoring , 2002, IEEE Power Engineering Review.

[15]  Dezheng Wu,et al.  Using Mechanical Vibration to Estimate Rotor Speed in Induction Motor Drives , 2007, 2007 IEEE Power Electronics Specialists Conference.

[16]  Ramesh C. Bansal,et al.  Impact of voltage unbalance on the performance of three-phase induction motor , 2006 .

[17]  Juan W. Dixon,et al.  Induction motor speed estimator and synchronous motor position estimator based on a fixed carrier frequency signal , 1996, IEEE Trans. Ind. Electron..

[18]  Ying Wu,et al.  Induction-motor stator and rotor winding temperature estimation using signal injection method , 2006, IEEE Transactions on Industry Applications.

[19]  Austin H. Bonnett.  Understanding Efficiency in Squirrel-Cage Induction Motors , 1980, IEEE Transactions on Industry Applications.

[20]  He Zhang,et al.  A Low-Intrusion Load and Efficiency Evaluation Method for In-Service Motors Using Vibration Tests With an Accelerometer , 2008, IEEE Transactions on Industry Applications.

[21]  Giuseppe Guidi,et al.  A novel stator resistance estimation method for speed-sensorless induction motor drives , 2000 .

[22]  Robert D. Lorenz,et al.  Transducerless position and velocity estimation in induction and salient AC machines , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[23]  T.G. Habetler,et al.  A survey of efficiency-estimation methods for in-service induction motors , 2006, IEEE Transactions on Industry Applications.

[24]  Loganathan Umanand,et al.  Online estimation of stator resistance of an induction motor for speed control applications , 1995 .

[25]  Leon M. Tolbert,et al.  Comparison of induction motor field efficiency evaluation methods , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[26]  Atsuo Kawamura,et al.  Sensorless speed estimation of induction motor based on the secondary and primary resistance on-line identification without any additional signal injection , 1998, PESC 98 Record. 29th Annual IEEE Power Electronics Specialists Conference (Cat. No.98CH36196).

[27]  Wenping Cao,et al.  Experimental Uncertainty in Estimation of the Losses and Efficiency of Induction Motors , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[28]  Paul G. Cummings,et al.  Induction Motor Efficiency Test Methods , 1981, IEEE Transactions on Industry Applications.

[29]  Ramachandran Venkatesan,et al.  Induction motor speed estimation using artificial neural networks , 1996, Proceedings of 1996 Canadian Conference on Electrical and Computer Engineering.

[30]  Ieee Standards Board.  IEEE standard test procedure for polyphase induction motors and generators , 1992 .

[31]  G. Rata,et al.  Induction Motor Speed Estimator Using Rotor Slot Harmonics , 2009 .

[32]  G. Yang,et al.  Adaptive speed identification scheme for vector controlled speed sensor-less inverter-induction motor drive , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[33]  K. J. Bradley,et al.  An FFT-based novel approach to noninvasive speed measurement in induction motor drives , 1992 .

[34]  T.G. Habetler,et al.  An on-line stator winding resistance estimation technique for temperature monitoring of line-connected induction machines , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[35]  H. B. Ertan,et al.  A method for stator resistance measurement suitable for vector control , 1994, Proceedings of IECON'94 - 20th Annual Conference of IEEE Industrial Electronics.

[36]  M. Stiebler,et al.  Superposition methods for on-line determination of a.c. machine winding resistance , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[37]  Semyon G. Rabinovich,et al.  Measurement Errors and Uncertainties: Theory and Practice , 1999 .

[38]  M.A. Khan,et al.  Comparison of Standards for Determining Losses and Efficiency of Three-Phase Induction Motors , 2007, 2007 IEEE Power Engineering Society Conference and Exposition in Africa - PowerAfrica.

[39]  K. Iwata,et al.  Steady-State Characteristics of a Torque and Speed Control System of an Induction Motor Utilizing Rotor Slot Harmonics for Slip Frequency Sensing , 1985, IEEE Transactions on Power Electronics.

[40]  Alexey Pavlov,et al.  Real-Time Rotor and Stator Resistances Estimation of an Induction Motor , 2001 .

[41]  J. W. Finch,et al.  A Comparison of Induction Motor Speed Estimation using Conventional MRAS and AI-Based MRAS with a Dynamic Reference Model , 2008, WCE 2008.

[42]  D. S. Zinger,et al.  PI and fuzzy estimators for tuning the stator resistance in direct torque control of induction machines , 1994 .

[43]  E. Romero,et al.  How the efficiency of induction motor is measured , 2008 .

[44]  A.T. de Almeida,et al.  Comparative analysis of IEEE 112-B and IEC 34-2 efficiency testing standards using stray load losses in low voltage three-phase, cage induction motors , 2001, 2001 IEEE Industrial and Commercial Power Systems Technical Conference. Conference Record (Cat. No.01CH37226).

[45]  Lu Zhen,et al.  Sensorless field orientation control of induction machines based on a mutual MRAS scheme , 1998, IEEE Trans. Ind. Electron..

[46]  Cursino B. Jacobina,et al.  On-line estimation of the stator resistance of induction machines based on zero-sequence model , 2000 .

[47]  M. Ishida,et al.  A New Slip Frequncy Detector of an Induction Motor Utilizing Rotor Slot Harmonics , 1984, IEEE Transactions on Industry Applications.

[48]  R. Harley,et al.  A stator and rotor resistance estimation technique for conductor temperature monitoring , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[49]  W. F. Weldon,et al.  Possible errors in measurement of air-gap torque pulsations of induction motors , 1992 .

[50]  Bimal K. Bose,et al.  Quasi-fuzzy estimation of stator resistance of induction motor , 1998 .

[51]  Cursino B. Jacobina,et al.  Linear parameter estimation for induction machines considering the operating conditions , 1999 .

[52]  Wenping Cao,et al.  Assessing the impacts of rewind and repeated rewinds on induction motors: is an opportunity for Re-designing the machine being wasted? , 2005, IEEE Transactions on Industry Applications.

[53]  Sang-Hoon Lee,et al.  An online identification method for both stator-and rotor resistances of induction motors without rotational transducers , 2000, IEEE Trans. Ind. Electron..

[54]  Colin H. Hansen,et al.  Estimation of the number of rotor slots and rotor speed in induction motors using current, flux or vibration signature analysis , 2008 .

[55]  Thomas G. Habetler,et al.  Sensorless speed measurement using current harmonic spectral estimation in induction machine drives , 1994 .

[56]  Thomas G. Habetler,et al.  A comparison of spectrum estimation techniques for sensorless speed detection in induction machines , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[57]  K. J. Bradley,et al.  An investigation into speed measurement of induction motor drives using rotor slot harmonics and spectral estimation techniques , 1993 .

[58]  S. L. Ho,et al.  Speed estimation of an induction motor drive using an optimized extended Kalman filter , 2002, IEEE Trans. Ind. Electron..

[59]  M. Pastorelli,et al.  International standards for the induction motor efficiency evaluation: a critical analysis of the stray-load loss determination , 2004, IEEE Transactions on Industry Applications.

[60]  In-Joong Ha,et al.  An on-line identification method for both stator and rotor resistances of induction motors without rotational transducers , 1996, Proceedings of IEEE International Symposium on Industrial Electronics.