论文信息 - Validation of a Computational Approach to Predict Bursting Pressure of Scored Steel Plates

Validation of a Computational Approach to Predict Bursting Pressure of Scored Steel Plates

Bursting pressure is a key parameter to optimize the performance of shock wave experimental devices or to guarantee the proper activation of overpressure safety devices. This paper provides the experimental results of scored circular thin steel plates brought to collapse by an increase in applied pressure. A finite element approach is adopted to predict the bursting pressure: detailed description of the numerical model choices and the effectiveness of simulating the nonlinear response are also given. The reliability of the proposed model in predicting the experimental response is evaluated through the comparison of global and local indicators under blind prediction conditions. A numerical parametric study is carried out to better understand the diaphragm deformation mechanics and the influence of the main parameters on the diaphragms burst pressure.

[1] Franz Dieter Fischer,et al. Auswirkung von monotoner und zyklischer Belastung auf die Undichtheit eines Tankbodenecks , 2008 .

[2] S. Timoshenko,et al. THEORY OF PLATES AND SHELLS , 1959 .

[3] J. B. Martin,et al. Deformation of thin plates subjected to impulsive loading—a review Part II: Experimental studies , 1989 .

[4] J. B. Martin,et al. Deformation of thin plates subjected to impulsive loading—A review , 1989 .

[5] Otmar Kolednik,et al. A note on calibration of ductile failure damage indicators , 1995 .

[6] M. di Prisco,et al. A New Shock Tube Facility for Tunnel Safety , 2011 .

[7] E. M. Rothkopf,et al. Diaphragm opening process in shock tubes , 1974 .

[8] K. Jansen,et al. Effect of pressure on electrical resistance strain gages , 1997 .

[9] Frederick A. Leckie,et al. Modeling of anisotropic behavior of weakly bonded fiber reinforced MMC's , 1993 .

[10] James B. Kyser,et al. Behavior of burst diaphragms in shock tubes , 1975 .

[11] Knud Winstrup Johansen. Yield-line theory , 1962 .

[12] J. Hancock,et al. On the mechanisms of ductile failure in high-strength steels subjected to multi-axial stress-states , 1976 .

[13] G. Nurick,et al. The deformation and tearing of thin circular plates subjected to impulsive loads , 1990 .

[14] W. E. Baker,et al. Explosion Hazards and Evaluation , 2012 .

[15] Augusto Ajovalasit,et al. Embedded Strain Gauges: Effect of the Stress Normal to the Grid , 2005 .