Approximating Flexibility in Distributed Energy Resources: A Geometric Approach

With increasing availability of communication and control infrastructure at the distribution systems, it is expected that the distributed energy resources (DERs) will take an active part in future power systems operations. One of the main challenges associated with integration of DERs in grid planning and control is in estimating the available flexibility in a collection of (heterogeneous) DERs, each of which may have local constraints that vary over time. In this work, we present a geometric approach for approximating the flexibility of a DER in modulating its active and reactive power consumption. The proposed method is agnostic about the type and model of the DERs, thereby facilitating a plug-and-play approach, and allows scalable aggregation of the flexibility of a collection of (heterogeneous) DERs at the distributed system level. Simulation results are presented to demonstrate the performance of the proposed method.

[1]  Tyrone L. Vincent,et al.  Ramping Rate Flexibility of Residential HVAC Loads , 2016, IEEE Transactions on Sustainable Energy.

[2]  Jos F. Sturm,et al.  A Matlab toolbox for optimization over symmetric cones , 1999 .

[3]  Ian A. Hiskens,et al.  Achieving Controllability of Electric Loads , 2011, Proceedings of the IEEE.

[4]  Wei Zhang,et al.  A Geometric Approach to Aggregate Flexibility Modeling of Thermostatically Controlled Loads , 2016, IEEE Transactions on Power Systems.

[5]  Z. Chen,et al.  Reactive power capability of the wind turbine with Doubly Fed Induction Generator , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[6]  Tyrone L. Vincent,et al.  Aggregate Flexibility of Thermostatically Controlled Loads , 2015, IEEE Transactions on Power Systems.

[7]  Wei Zhang,et al.  Aggregated Modeling and Control of Air Conditioning Loads for Demand Response , 2013, IEEE Transactions on Power Systems.

[8]  Duncan S. Callaway.  Tapping the energy storage potential in electric loads to deliver load following and regulation, with application to wind energy , 2009 .

[9]  J. Lasserre.  Moments, Positive Polynomials And Their Applications , 2009 .

[10]  Duncan S. Callaway,et al.  State Estimation and Control of Electric Loads to Manage Real-Time Energy Imbalance , 2013, IEEE Transactions on Power Systems.

[11]  R. Schneider.  Convex Bodies: The Brunn–Minkowski Theory: Minkowski addition , 1993 .

[12]  P. Parrilo.  Structured semidefinite programs and semialgebraic geometry methods in robustness and optimization , 2000 .

[13]  Andrey Bernstein,et al.  A composable method for real-time control of active distribution networks with explicit power setpoints. Part I: Framework , 2015 .

[14]  Ian A. Hiskens,et al.  Reactive power limitation due to wind-farm collector networks , 2015, 2015 IEEE Eindhoven PowerTech.

[15]  Peter J Seiler,et al.  SOSTOOLS: Sum of squares optimization toolbox for MATLAB , 2002 .

[16]  Ernesto Kofman,et al.  Load management: Model-based control of aggregate power for populations of thermostatically controlled loads , 2012 .

[17]  Ian A. Hiskens,et al.  Hysteresis-based charging control of plug-in electric vehicles , 2012, 2012 IEEE 51st IEEE Conference on Decision and Control (CDC).