Compact design of work cell with robot arm and positioning table under a task completion time constraint

A work cell is generally designed to achieve a high throughput and its size is typically viewed as contingent to component sizes. In this paper, we aim to design a compact work cell (spatial requirement) and to minimize its task completion time (temporal requirement) to a value set as a constraint. By doing so, a work cell occupies a minimal space and achieves its desired throughput. The work cell size is evaluated based on the size and the swept volume of components. This evaluation is important since a robot arm can have a very large swept volume depending on a given task. To satisfy the spatial and temporal requirements, we propose the integration of the base placement optimization, goal rearrangement, and motion coordination between the robot arm and the positioning table. Furthermore, we introduce two motion coordination schemes based on the spatial and temporal requirements. We showed the effectiveness of the proposed method through simulations.

[1]  Andrew Kusiak,et al.  The facility layout problem , 1987 .

[2]  Tim Roughgarden,et al.  Planning Tours of Robotic Arms among Partitioned Goals , 2006, Int. J. Robotics Res..

[3]  Jun Ota,et al.  Coordinated motion control of a robot arm and a positioning table with arrangement of multiple goals , 2008, 2008 IEEE International Conference on Robotics and Automation.

[4]  Dinesh Manocha,et al.  OBBTree: a hierarchical structure for rapid interference detection , 1996, SIGGRAPH.

[5]  Tim Lüth.  Automated planning of robot workcell layouts , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[6]  Bryan Kok Ann Ngoi,et al.  Optimising robot workcell layout , 1996 .

[7]  Aristides A. G. Requicha,et al.  Multiple-goals path planning for coordinate measuring machines , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[8]  Zhixiao Wang,et al.  Trajectory planning for coordinated motion of a robot and a positioning table. I. Path specification , 1990, IEEE Trans. Robotics Autom..

[9]  Saïd Zeghloul,et al.  Optimal placement of robotic manipulators using multiple kinematic criteria , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[10]  Abhijit Gosavi,et al.  Simulation-Based Optimization: Parametric Optimization Techniques and Reinforcement Learning , 2003 .

[11]  Konstantinos-Dionysios Bouzakis,et al.  Determination of optimum robot base location considering discrete end-effector positions by means of hybrid genetic algorithm , 2008 .

[12]  Zvi Shiller.  Optimal Robot Motion Planning and Work-Cell Layout Design , 1997, Robotica.

[13]  Abhijit Gosavi,et al.  Simulation-Based Optimization: Parametric Optimization Techniques and Reinforcement Learning , 2003 .

[14]  George W. Irwin,et al.  A Practical Approach to Near Time-Optimal Inspection-Task-Sequence Planning for Two Cooperative Industrial Robot Arms , 1998, Int. J. Robotics Res..

[15]  Jean-Claude Latombe,et al.  Robot motion planning , 1970, The Kluwer international series in engineering and computer science.

[16]  David Hsu,et al.  Placing a robot manipulator amid obstacles for optimized execution , 1999, Proceedings of the 1999 IEEE International Symposium on Assembly and Task Planning (ISATP'99) (Cat. No.99TH8470).

[17]  Jonathan Cagan,et al.  A simulated annealing-based algorithm using hierarchical models for general three-dimensional component layout , 1998, Comput. Aided Des..