In-situ fabrication of TiC-Fe3Al cermet

[1]  L. Yi,et al.  Microstructure and performance of graded Ti(C, N)-based cermets modified by nitriding treatment during different sintering stages , 2017 .

[2]  S. Singh,et al.  Influence of nickel boride addition on sintering behaviour and mechanical properties of TiC–Ni based cermets , 2016 .

[3]  Aijun Liu,et al.  Effect of WC-Co granules on mechanical properties and microstructure of Ti(C,N)-based cermets , 2016 .

[4]  K. Zhou,et al.  TiC whisker reinforced ultra-fine TiC-based cermets: Microstructure and mechanical properties , 2016 .

[5]  Farhad Saba,et al.  Fabrication of nanocrystalline TiC coating on AISI D2 steel substrate via high-energy mechanical alloying of Ti and C , 2016 .

[6]  F. Karimzadeh,et al.  Thermodynamic analysis of solid solution formation in the nanocrystalline Fe-Ti-Al ternary system during mechanical alloying , 2013 .

[7]  A. Khajepour,et al.  Tribology characteristics of in-situ laser deposition of Fe-TiC , 2012 .

[8]  Wei-min Liu,et al.  Microstructures and mechanical properties of Fe–28Al–5Cr/TiC composites produced by hot-pressing sintering , 2011 .

[9]  Z. Bojar,et al.  Fe-Al phase formation around SHS reactions under isothermal conditions , 2011 .

[10]  S. Sugiyama,et al.  Indentation Size Effect for the Hardness of Refractory Carbides , 2010 .

[11]  Z. Bojar,et al.  The influence of different additives on the kinetics of self-propagating high-temperature synthesis during the sintering process of Fe and Al elemental powders , 2010 .

[12]  R. Pérez,et al.  Room Temperature Mechanical Properties of Fe3Al Intermetallic Alloys with Li and Ni Additions , 2009, Journal of Materials Engineering and Performance.

[13]  D. Wexler,et al.  Synthesis of TiC by controlled ball milling of titanium and carbon , 2007 .

[14]  Chen-ti Hu,et al.  Swelling behavior in reactive sintering of Fe–Al mixtures , 2004 .

[15]  C. Suryanarayana,et al.  Mechanical alloying and milling , 2004 .

[16]  Risheng Liu,et al.  Activation energy of self-heating process Studied by DSC , 2002 .

[17]  Y. Park,et al.  Effect of MA on microstructure and synthesis path of in-situ TiC reinforced Fe–28at.% Al intermetallic composites , 2002 .

[18]  S. Hanada,et al.  In-situ production and microstructures of iron aluminide/TiC composites , 1999 .

[19]  B. Murty,et al.  Novel materials synthesis by mechanical alloying/milling , 1998 .

[20]  R. M. Aikin.  The mechanical properties of in-situ composites , 1997 .

[21]  E. Specht,et al.  Liquid-phase sintered iron aluminide-ceramic composites , 1997 .

[22]  C. Koch,et al.  Mechanical milling/alloying of intermetallics , 1996 .

[23]  S. Babu,et al.  Processing of Fe3Al and FeAl alloys by reaction synthesis , 1995 .

[24]  A. K. Bhattacharya,et al.  Temperature rise during mechanical alloying , 1992 .

[25]  R. Watanabe,et al.  Microstructural Refinement & Amorphization in Ti-Al, Ti-Si and Si-W System by Mechanical Alloying , 1992 .

[26]  G. Bastin,et al.  On the diffusion of carbon in titanium carbide , 1989 .

[27]  J. S. Benjamin,et al.  The mechanism of mechanical alloying , 1974 .