The development and future of lithium ion batteries

This year, the battery industry celebrates the 25th anniversary of the introduction of the lithium ion rechargeable battery by Sony Corporation. The discovery of the system dates back to earlier work by Asahi Kasei in Japan, which used a combination of lower temperature carbons for the negative electrode to prevent solvent degradation and lithium cobalt dioxide modified somewhat from Goodenough’s earlier work. The development by Sony was carried out within a few years by bringing together technology in film coating from their magnetic tape division and electrochemical technology from their battery division. The past 25 years has shown rapid growth in the sales and in the benefits of lithium ion in comparison to all the earlier rechargeable battery systems. Recent work on new materials shows that there is a good likelihood that the lithium ion battery will continue to improve in cost, energy, safety and power capability and will be a formidable competitor for some years to come. © The Author(s) 2016. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited. [DOI: 10.1149/2.0251701jes] All rights reserved.

[1]  Yan Chen,et al.  Gas–solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries , 2016, Nature Communications.

[2]  Rahul Malik,et al.  The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials. , 2016, Nature chemistry.

[3]  Fabio Albano,et al.  Modification of Ni-Rich FCG NMC and NCA Cathodes by Atomic Layer Deposition: Preventing Surface Phase Transitions for High-Voltage Lithium-Ion Batteries , 2016, Scientific Reports.

[4]  L. Komsiyska,et al.  Effect of solid loading on the processing and behavior of PEDOT:PSS binder based composite cathodes for lithium ion batteries , 2016 .

[5]  Y. S. Lin,et al.  Ceramic coated polypropylene separators for lithium-ion batteries with improved safety: effects of high melting point organic binder , 2016 .

[6]  A. Kiliç,et al.  A review of nanofibrous structures in lithium ion batteries , 2015 .

[7]  Gerbrand Ceder,et al.  A disordered rock-salt Li-excess cathode material with high capacity and substantial oxygen redox activity: Li1.25Nb0.25Mn0.5O2 , 2015 .

[8]  Gerbrand Ceder,et al.  A new class of high capacity cation-disordered oxides for rechargeable lithium batteries: Li–Ni–Ti–Mo oxides , 2015 .

[9]  J·鲍姆格特纳,et al.  Battery pack for a hand-held power tool , 2015 .

[10]  Ji‐Guang Zhang,et al.  Recent Advances on the Understanding of Structural and Composition Evolution of LMR Cathodes for Li-ion Batteries , 2015, Front. Energy Res..

[11]  M. Nakayama,et al.  High-capacity electrode materials for rechargeable lithium batteries: Li3NbO4-based system with cation-disordered rocksalt structure , 2015, Proceedings of the National Academy of Sciences.

[12]  D. Guyomard,et al.  Critical roles of binders and formulation at multiscales of silicon-based composite electrodes , 2015 .

[13]  Colm O'Dwyer,et al.  Recent progress in theoretical and computational investigations of Li-ion battery materials and electrolytes. , 2015, Physical chemistry chemical physics : PCCP.

[14]  Jianming Zheng,et al.  Structural and Chemical Evolution of Li- and Mn-Rich Layered Cathode Material , 2015 .

[15]  K Ramesha,et al.  Origin of voltage decay in high-capacity layered oxide electrodes. , 2015, Nature materials.

[16]  Mingxue Tang,et al.  Solid-State NMR on the Family of Positive Electrode Materials Li_2Ru_{1-y}Sn_yO_3 for Li-ion batteries , 2014 .

[17]  Karim Zaghib,et al.  Comparative Issues of Cathode Materials for Li-Ion Batteries , 2014 .

[18]  A. Manthiram,et al.  The role of composition in the atomic structure, oxygen loss, and capacity of layered Li–Mn–Ni oxide cathodes , 2014 .

[19]  K Ramesha,et al.  Li(4)NiTeO(6) as a positive electrode for Li-ion batteries. , 2013, Chemical communications.

[20]  Haijun Yu,et al.  High-Energy Cathode Materials (Li2MnO3-LiMO2) for Lithium-Ion Batteries. , 2013, The journal of physical chemistry letters.

[21]  Robert Spotnitz,et al.  Design and Simulation of Spirally-Wound, Lithium-Ion Cells , 2013 .

[22]  Marie-Liesse Doublet,et al.  High Performance Li2Ru1–yMnyO3 (0.2 ≤ y ≤ 0.8) Cathode Materials for Rechargeable Lithium-Ion Batteries: Their Understanding , 2013 .

[23]  D. He,et al.  Preparation of 3D nanoporous copper-supported cuprous oxide for high-performance lithium ion battery anodes. , 2013, Nanoscale.

[24]  Jiajun Chen,et al.  Recent Progress in Advanced Materials for Lithium Ion Batteries , 2013, Materials.

[25]  Yuanxin Chen,et al.  The Development of Silicon Nanocomposite Materials for Li-Ion Secondary Batteries , 2011 .

[26]  Kazunori Ozawa,et al.  Lithium Ion Rechargeable Batteries , 2009 .

[27]  Shengbo Zhang.  A review on the separators of liquid electrolyte Li-ion batteries , 2007 .

[28]  Jan N. Reimers,et al.  Predicting current flow in spiral wound cell geometries , 2006 .

[29]  John T. Vaughey,et al.  The significance of the Li2MnO3 component in ‘composite’ xLi2MnO3 · (1 − x)LiMn0.5Ni0.5O2 electrodes , 2004 .

[30]  M. Whittingham,et al.  Lithium batteries and cathode materials. , 2004, Chemical reviews.

[31]  G. Blomgren.  Liquid electrolytes for lithium and lithium-ion batteries , 2003 .

[32]  D. D. MacNeil,et al.  Layered Li[NixCo1‐2xMnx]O2 Cathode Materials for Lithium‐Ion Batteries. , 2002 .

[33]  D. D. MacNeil,et al.  Layered Cathode Materials Li [ Ni x Li ( 1 / 3 − 2x / 3 ) Mn ( 2 / 3 − x / 3 ) ] O 2 for Lithium-Ion Batteries , 2001 .

[34]  다다요시 다카하시,et al.  Non-aqueous electrolyte cell , 2000 .

[35]  E. Peled,et al.  The Anode/Electrolyte Interface , 1998 .

[36]  Y. Nishi,et al.  The development of lithium ion secondary batteries , 1996, 1996 Symposium on VLSI Circuits. Digest of Technical Papers.

[37]  A. Mabuchi.  A Survey on the Carbon Anode Materials for Rechargeable Lithium Batteries (炭素材料と電気化学 ) , 1994 .

[38]  Jeff Dahn,et al.  Studies of Lithium Intercalation into Carbons Using Nonaqueous Electrochemical Cells , 1990 .

[39]  J. C. Hunter.  Preparation of a new crystal form of manganese dioxide: λ-MnO2 , 1981 .

[40]  John B. Goodenough,et al.  LixCoO2 (0, 1980 .

[41]  B. Scrosati,et al.  A Cyclable Lithium Organic Electrolyte Cell Based on Two Intercalation Electrodes , 1980 .

[42]  Andreas Jossen,et al.  Calendar Aging of NCA Lithium-Ion Batteries Investigated by Differential Voltage Analysis and Coulomb Tracking , 2017 .

[43]  J. Dahn,et al.  Electrolyte System for High Voltage Li-Ion Cells , 2016 .

[44]  K. Zaghib,et al.  Lithium batteries : science and technology , 2016 .

[45]  Avicenne Energy,et al.  The Rechargeable Battery Market And Main Trends 2011 2020 , 2015 .

[46]  J. C. Burns,et al.  A Systematic Study of Electrolyte Additives in Li[Ni1/3Mn1/3Co1/3]O2 (NMC)/Graphite Pouch Cells , 2014 .

[47]  김대규.  A secondary battery , 2012 .

[48]  Rachid Yazami,et al.  A reversible graphite-lithium negative electrode for electrochemical generators , 1983 .