Precision Study of a Decoupled Four Degrees of Freedom Parallel Robot Including Manufacturing and Assembling Errors

This paper presents a study of geometric errors due to assembly and manufacturing tolerance on the kinematic accuracy of a parallel robot with four degrees of freedom with decoupled motions and fully isotropic in translation — ISOGLIDE4-T3R1.

[1]  P. Renaud.  Apport de la vision pour l'identification géométrique de mécanismes parallèles , 2003 .

[2]  Q. C. Li,et al.  General Methodology for Type Synthesis of Symmetrical Lower-Mobility Parallel Manipulators and Several Novel Manipulators , 2002, Int. J. Robotics Res..

[3]  G. Gogu.  Structural synthesis of fully-isotropic translational parallel robots via theory of linear transformations , 2004 .

[4]  Clément Gosselin,et al.  Type synthesis of 3T1R 4-DOF parallel manipulators based on screw theory , 2004, IEEE Transactions on Robotics and Automation.

[5]  Jian Wang,et al.  On the accuracy of a Stewart platform. I. The effect of manufacturing tolerances , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[6]  Mohamed Abderrahim,et al.  Kinematic model identification of industrial manipulators , 2000 .

[7]  G. Gogu,et al.  Rigidity analysis of T3R1 parallel robot with uncoupled kinematics , 2004 .

[8]  Z. Huang,et al.  Type Synthesis of Symmetrical Lower-Mobility Parallel Mechanisms Using the Constraint-Synthesis Method , 2003, Int. J. Robotics Res..

[9]  Nicolas Andreff,et al.  Simplifying the kinematic calibration of parallel mechanisms using vision-based metrology , 2006, IEEE Transactions on Robotics.

[10]  O. Company,et al.  H4: a new family of 4-DOF parallel robots , 1999, 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (Cat. No.99TH8399).

[11]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[12]  Yoon Keun Kwak,et al.  Development of a parallel wire mechanism for measuring position and orientation of a robot end-effector , 1998 .

[13]  Hui Zhao,et al.  New kinematic structures for 2-, 3-, 4-, and 5-DOF parallel manipulator designs , 2002 .

[14]  Yuefa Fang,et al.  Structure Synthesis of a Class of 4-DoF and 5-DoF Parallel Manipulators with Identical Limb Structures , 2002, Int. J. Robotics Res..