Retrofit of heat exchanger networks with heat transfer enhancement based on an area ratio approach

[1]  P. Kumar,et al.  Heat transfer with coiled wire turbulence promoters , 1970 .

[2]  Kenichi Hashizume.  Heat Transfer and Pressure Drop Characteristics of Finned Tubes in Cross Flow , 1981 .

[3]  R. Sethumadhavan,et al.  Turbulent flow heat transfer and fluid friction in helical-wire-coil-inserted tubes , 1983 .

[4]  B. Linnhoff,et al.  The pinch design method for heat exchanger networks , 1983 .

[5]  S. B. Uttarwar,et al.  Augmentation of Laminar Flow Heat Transfer in Tubes by Means of Wire Coil Inserts , 1985 .

[6]  Bodo Linnhoff,et al.  Using pinch technology for process retrofit , 1986 .

[7]  B. Linnhoff,et al.  Sensitivity tables for the design of flexible processes (1) ― How much contingency in heat exchanger networks is cost-effective? , 1986 .

[8]  Christodoulos A. Floudas,et al.  A retrofit approach for heat exchanger networks , 1989 .

[9]  Christodoulos A. Floudas,et al.  A comprehensive optimization model of the heat exchanger network retrofit problem , 1990 .

[10]  G. Polley,et al.  Pressure drop considerations in the retrofit of heat exchanger networks , 1990 .

[11]  Ignacio E. Grossmann,et al.  A screening and optimization approach for the retrofit of heat-exchanger networks , 1991 .

[12]  R. M. Manglik,et al.  Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes: Part II—Transition and Turbulent Flows , 1993 .

[13]  R. M. Manglik,et al.  Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes: Part I—Laminar Flows , 1993 .

[14]  Thore Berntsson,et al.  Design Better Heat Exchanger Network Rerofits , 1993 .

[15]  Petr Stehlík,et al.  Comparison of correction factors for shell-and-tube heat exchangers with segmental or helical baffles , 1994 .

[16]  英男 稲葉,et al.  ワイヤーコイルを用いた円管内熱伝達促進と流動抵抗軽減に関する基礎研究 : 第2報,ワイヤーコイルによる管内熱伝達の評価と最適配置 , 1994 .

[17]  Petr Stehlík,et al.  Helical Baffles in Shell-and-Tube Heat Exchangers, Part I: Experimental Verification , 1996 .

[18]  T. S. Ravigururajan,et al.  Development and verification of general correlations for pressure drop and heat transfer in single-phase turbulent flow in enhanced tubes , 1996 .

[19]  N.D.K. Asante,et al.  An automated approach for heat exchanger network retrofit featuring minimal topology modifications , 1996 .

[20]  R. Mukherjee,et al.  Effectively design shell-and-tube heat exchangers , 1998 .

[21]  Anil W. Date,et al.  Numerical Prediction of Laminar Flow and Heat Transfer in a Tube with Twisted-tape Insert: Effects of Property Variations and Buoyancy , 2000 .

[22]  Petar Sabev Varbanov,et al.  Rules for paths construction for HENs debottlenecking , 2000 .

[23]  D. R. Oliver,et al.  Heat transfer enhancement in round tube using wire coil: Influence of length and segmentation , 2003 .

[24]  A. Viedma,et al.  Experimental study of heat transfer enhancement with wire coil inserts in laminar-transition-turbulent regimes at different Prandtl numbers , 2005 .

[25]  Robin Smith,et al.  Chemical Process: Design and Integration , 2005 .

[26]  V. Dharma Rao,et al.  A combined approach to predict friction coefficients and convective heat transfer characteristics in A tube with twisted tape inserts for a wide range of Re and Pr , 2005 .

[27]  Robin Smith,et al.  Recent development in the retrofit of heat exchanger networks , 2010 .

[28]  Igor Bulatov,et al.  Novel optimization method for retrofitting heat exchanger networks with intensified heat transfer , 2011 .

[29]  Igor Bulatov,et al.  Improving energy recovery in heat exchanger network with intensified tube-side heat transfer , 2011 .

[30]  Igor Bulatov,et al.  Application of intensified heat transfer for the retrofit of heat exchanger network , 2012 .

[31]  Igor Bulatov,et al.  Novel MILP-based iterative method for the retrofit of heat exchanger networks with intensified heat transfer , 2012, Comput. Chem. Eng..

[32]  K. V. Sharma,et al.  Effect of full length twisted tape inserts on heat transfer and friction factor enhancement with Fe3O4 magnetic nanofluid inside a plain tube: An experimental study , 2012 .

[33]  Robin Smith,et al.  New models for conventional and heat exchangers enhanced with tube inserts for heat exchanger network retrofit , 2014 .

[34]  Robin Smith,et al.  Heat exchanger network retrofit with a fixed network structure , 2014 .

[35]  Mary O. Akpomiemie,et al.  Retrofit of heat exchanger networks without topology modifications and additional heat transfer area , 2015 .