Microhardness testing of plastics: Literature review
暂无分享,去创建一个
[1] J. Varner,et al. Importance of load cell sensitivity in determination of the load dependence of hardness in recording microhardness tests , 1991 .
[2] Y. Deslandes,et al. Correlation of microhardness and morphology of poly(ether-ether-ketone) films , 1991 .
[3] J. Martínez-Salazar,et al. Mechanical study of poly(vinylidene fluoride)-poly(methyl methacrylate) amorphous blends , 1991 .
[4] R. Brown,et al. An investigation of the reproducibility of rubber hardness tests , 1991 .
[5] S. Datt,et al. A microhardness test to study plasticization in environmentally-affected polypropylene , 1991 .
[6] R. Katare,et al. Microhardness of blends of polystyrene and poly(methyl methacrylate) , 1991 .
[7] S. Datt,et al. Effect of gamma irradiation on the microhardness of glass fibre reinforced polymer (GFRP) , 1991 .
[8] C. Fonseca,et al. Microhardness of ethylene copolymers and correlation with their mechanical properties , 1991 .
[9] T. Jawhari,et al. Application of a new system controlled by computer to measure in real time microhardness on LLDPEs , 1991 .
[10] P. J. Henderson,et al. Changes in microhardness and creep modulus during the ageing of polypropylene , 1991 .
[11] M. A. Gómez,et al. Influence of composition and molecular weights on the microhardness of poly(ethylene oxide)-isotactic poly(methyl methacrylate) blends , 1990 .
[12] A. Wolfenden,et al. Dynamic Loading: A New Microhardness Test Method , 1990 .
[13] J. Pereña,et al. Comparative study of orientation in hot‐drawn poly(ethylene terephthalate) by means of refractive index and microhardness measurements , 1990 .
[14] J. M. Pastor,et al. Thermal transitions in polyoctenamers observed by microhardness technique , 1990 .
[15] F. J. Barahona,et al. A durability index in the weathering of low-density polyethylene (LDPE) films , 1990 .
[16] J. Saja,et al. Characterization of the isothermal crystallization of poly(ethylene terephthalate) by microhardness measurements , 1989 .
[17] J. Pereña,et al. Vickers microhardness related to mechanical properties of polypropylene , 1989 .
[18] J. M. Pastor,et al. Temperature dependence of microhardness indentations and dynamic mechanical moduli of polyesters in the vicinity of the glass transition , 1989 .
[19] J. Saja,et al. Monitoring the UV degradation of PVC window frames by microhardness analysis , 1989 .
[20] J. N. Hay. Handbook of plastics test methods 3rd ed: P. Brown (ed.) Longman Scientific and Technical in association with the Plastics and Rubber Institute, 1988, 442 pages, ISBN 0-582-03015-3 , 1989 .
[21] J. Pereña,et al. Relationships between mechanical properties and microhardness of polyethylenes , 1989 .
[22] T. Manley. Plastics materials 5th edn: J. A. Brydson Butterworths, Guildford, 1989 xiv + 839 pages, £57.50 ISBN 0-408-00721-4 , 1989 .
[23] D. Rueda,et al. Microhardness and mechanical anisotropy of elongational flow injection molded polyethylene , 1989 .
[24] B. L. Evans. The microhardness of injection moulded polystyrene and polyethylene , 1989 .
[25] P. Eyerer,et al. Influence of the processing conditions on morphology and deformation behavior of poly(butylene terephthalate) (PBT) , 1988 .
[26] H. Kilian,et al. New aspects of yielding in semicrystalline polymers related to microstructure: Branched polyethylene , 1988 .
[27] V. R. Howes,et al. Relaxation and recovery measurements by the microhardness indentation technique for transparent polymeric materials , 1987 .
[28] J. A. Mendez-Morales,et al. Interference microscopy measurements of depth at Vickers hardness indentations in polyethylene , 1987 .
[29] L. Mandelkern,et al. Influence of structural and morphological factors on the mechanical properties of the polyethylenes , 1987 .
[30] D. Rueda,et al. Influence of pressure and crystallization rate on the surface microhardness of high-density polyethylene , 1986 .
[31] J. Saja,et al. Thermal degradation of stabilized rigid poly(vinyl chloride) monitored by microhardness measurements , 1986 .
[32] J. Saja,et al. A microhardness test to detect crystallinity changes in stabilized rigid PVC , 1986 .
[33] J. Saja,et al. A microhardness test for monitoring the thermal stabilization of solid PVC , 1985 .
[34] R. Crawford,et al. Microhardness testing of plastics using ball and conical indenters , 1985 .
[35] F. Calleja. Microhardness relating to crystalline polymers , 1985 .
[36] J. Martínez-Salazar,et al. Influence of chlorosulfonation on the surface mechanical properties of lamellar polyethylene , 1983 .
[37] Roger Brown. Physical testing of rubbers , 1979 .
[38] K. Hillier. Testing of polymers, vol. 1 , 1966 .
[39] B. W. Mott. Micro-indentation hardness testing , 1956 .