Preparation and behavior of “molecular compound” through covalent crosslinking between amino and sulfonic groups in single copolymers

[1]  J. Fauvarque,et al.  Ion exchange membranes based upon crosslinked sulfonated polyethersulfone for electrochemical applications , 2014 .

[2]  Sang Young Lee,et al.  Anomalous behavior of proton transport and dimensional stability of sulfonated poly(arylene ether sulfone) nonwoven/silicate composite proton exchange membrane with dual phase co-continuous morphology , 2014 .

[3]  H. Na,et al.  Self-assembly of multiwall carbon nanotubes on sulfonated poly (arylene ether ketone) as a proton exchange membrane , 2013, Journal of Polymer Research.

[4]  Xiaobo Liu,et al.  Influence of composition on the proton conductivity and mechanical properties of sulfonated poly(aryl ether nitrile) copolymers for proton exchange membranes , 2013, Journal of Polymer Research.

[5]  A. Miyamoto,et al.  Proton-conducting blend membranes of Nafion/poly(vinylphosphonic acid) for proton exchange membrane fuel cells , 2013, Journal of Polymer Research.

[6]  Zhe Wang,et al.  Sulfonated poly (aryl ether sulfone) containing 1, 3, 4-oxadiazole as proton exchange membranes for medium-high temperature fuel cells , 2013, Journal of Polymer Research.

[7]  E. Drioli,et al.  Sulphonated poly (glycidyl methacrylate) grafted cellophane membranes: novel application in polyelectrolyte membrane fuel cell (PEMFC) , 2013, Journal of Polymer Research.

[8]  Hongcheng Sun,et al.  Composite membranes based on fully sulfonated poly(aryl ether ketone)/epoxy resin/different curing agents for direct methanol fuel cells , 2013 .

[9]  A. Manthiram,et al.  Sulfonated poly(ether ether ketone) membranes with sulfonated graphene oxide fillers for direct methanol fuel cells , 2013 .

[10]  Xianfeng Li,et al.  Vanadium Flow Battery for Energy Storage: Prospects and Challenges. , 2013, The journal of physical chemistry letters.

[11]  L. Hong,et al.  Semi-interpenetrating polymer network proton exchange membranes with narrow and well-connected hydrophilic channels , 2013 .

[12]  Jedeok Kim,et al.  Crosslinked SPES-SPPSU membranes for high temperature PEMFCs , 2013 .

[13]  S. Jiang,et al.  A novel phosphotungstic acid impregnated meso-Nafion multilayer membrane for proton exchange membrane fuel cells , 2013 .

[14]  D. Yan,et al.  Novel sulfonated polybenzothiazoles with outstanding dimensional stability for proton exchange membranes , 2013 .

[15]  Philippe Knauth,et al.  Building bridges: Crosslinking of sulfonated aromatic polymers—A review , 2012 .

[16]  H. Na,et al.  Cross-linked proton exchange membranes for direct methanol fuel cells: Effects of the cross-linker structure on the performances , 2012 .

[17]  Jing Ni,et al.  Novel epoxy-based cross-linked polybenzimidazole for high temperature proton exchange membrane fuel cells , 2011 .

[18]  Synthesis and characterization of novel cardo poly(aryl ether sulfone) bearing zwitterionic side groups for proton exchange membranes , 2011 .

[19]  Huamin Zhang,et al.  Ion exchange membranes for vanadium redox flow battery (VRB) applications , 2011 .

[20]  H. Na,et al.  Novel covalent-ionically cross-linked membranes with extremely low water swelling and methanol crossover for direct methanol fuel cell applications , 2010 .

[21]  H. Na,et al.  Surface modification of heteropoly acid/SPEEK membranes by polypyrrole with a sandwich structure for direct methanol fuel cells , 2010 .

[22]  Chih-Chia Cheng,et al.  A new supramolecular sulfonated polyimide for use in proton exchange membranes for fuel cells. , 2010, Chemical communications.

[23]  H. Na,et al.  A novel sulfonated poly(ether ether ketone) and cross-linked membranes for fuel cells , 2010 .

[24]  Jun Zhang,et al.  Hydrophilic modification of poly(vinylidene fluoride) (PVDF) by in situ polymerization of methyl methacrylate (MMA) monomer , 2010 .

[25]  Xu Fei,et al.  Preparation and properties of epoxy-based cross-linked sulfonated poly(arylene ether ketone) proton exchange membrane for direct methanol fuel cell applications , 2010 .

[26]  H. Na,et al.  Carboxyl-terminated benzimidazole-assisted cross-linked sulfonated poly(ether ether ketone)s for highly conductive PEM with low water uptake and methanol permeability , 2010 .

[27]  Robert B. Moore,et al.  Effects of block length and solution-casting conditions on the final morphology and properties of disulfonated poly(arylene ether sulfone) multiblock copolymer films for proton exchange membranes , 2009 .

[28]  Mingyao Zhang,et al.  Physical and electrochemical behaviors of directly polymerized sulfonated poly(arylene ether ketone sulfone)s proton exchange membranes with different backbone structures , 2009 .

[29]  Zhenhua Jiang,et al.  Novel acid-base molecule-enhanced blends/copolymers for fuel cell applications , 2009 .

[30]  H. Na,et al.  Sulfonated poly(ether ether ketone)/clay-SO3H hybrid proton exchange membranes for direct methanol fuel cells , 2008 .

[31]  G. Robertson,et al.  Poly(aryl ether ketone)s with carboxylic acid groups: synthesis, sulfonation and crosslinking , 2008 .

[32]  H. Na,et al.  Sulfonated poly(ether ether ketone)/clay-SO3H hybrid proton exchange membranes for direct methanol fuel cells Journal of Power Sources , 2008 .

[33]  Y. Maekawa,et al.  Double crosslinked polyetheretherketone-based polymer electrolyte membranes prepared by radiation and thermal crosslinking techniques , 2007 .

[34]  Lingqian Kong,et al.  Improving hydrophilicity and protein resistance of poly(vinylidene fluoride) membranes by blending with amphiphilic hyperbranched-star polymer. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[35]  R. Wycisk,et al.  Direct methanol fuel cell membranes from Nafion–polybenzimidazole blends , 2006 .

[36]  Zhe Wang,et al.  Preparation and properties of sulfonated poly(ether ether ketone)s (SPEEK)/polypyrrole composite membranes for direct methanol fuel cells , 2006 .

[37]  Wei Zhang,et al.  Novel covalently cross-linked poly(etheretherketone) ionomer membranes , 2006 .

[38]  B. Freeman,et al.  Water Sorption, Proton Conduction, and Methanol Permeation Properties of Sulfonated Polyimide Membranes Cross-Linked with N,N-Bis(2-hydroxyethyl)-2-aminoethanesulfonic Acid (BES) , 2006 .

[39]  G. Robertson,et al.  A comparative structure–property study of methylphenylated and fluoromethylphenylated poly(aryl ethers) and their gas permeabilities and permselectivities , 2005 .

[40]  J. Kerres,et al.  Blended and Cross‐Linked Ionomer Membranes for Application in Membrane Fuel Cells , 2005 .

[41]  W. Goddard,et al.  Fluorinated imidazoles as proton carriers for water-free fuel cell membranes. , 2004, Journal of the American Chemical Society.

[42]  C. Huang,et al.  Miscibility of poly(vinylidene fluoride) and atactic poly(methyl methacrylate) , 2004 .

[43]  Kaspar Andreas Friedrich,et al.  Cross‐Linked Polyaryl Blend Membranes for Polymer Electrolyte Fuel Cells , 2004 .

[44]  B. Smitha,et al.  Polyelectrolyte Complexes of Chitosan and Poly(acrylic acid) As Proton Exchange Membranes for Fuel Cells , 2004 .

[45]  J. Garche,et al.  New membranes for direct methanol fuel cells , 2002 .

[46]  A. Kornyshev,et al.  Mechanisms of Proton Conductance in Polymer Electrolyte Membranes , 2001 .

[47]  J. Kerres,et al.  Synthesis and characterization of novel acid-base polymer blends for application in membrane fuel cells , 1999 .