A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling

Abstract The mechanical properties of fabricated parts by fused deposition modeling (FDM) are impaired by significant voids between deposition lines. In this study, a novel approach that adding thermally expandable microspheres into matrix and combining FDM process with thermal treatment was proposed to tackle the problem. The influences of microsphere content, heating temperature and heating time were investigated. The results show that appropriate conditions of thermal treatment exert a positive influence on mechanical properties. With the addition of 2 wt.% microspheres, tensile and compressive strength of samples heated at 140 °C for 120 s increase 25.4% and 52.2%, compared to untreated samples, respectively. A new process is developed to prepare foam materials based on FDM, which will have the potential applications in shoes industry.

[1]  L. Love,et al.  Highly oriented carbon fiber–polymer composites via additive manufacturing , 2014 .

[2]  Y. Shindo,et al.  Theoretical and experimental evaluation of double-notch shear strength of G-10CR glass-cloth/epoxy laminates at cryogenic temperatures , 1999 .

[3]  Dan Qiu,et al.  Void eliminating toolpath for extrusion‐based multi‐material layered manufacturing , 2002 .

[4]  Chul B. Park,et al.  Mechanical properties and foaming behavior of cellulose fiber reinforced high‐density polyethylene composites , 2009 .

[5]  M. Wilhelm,et al.  Effect of Carbon-Based Particles on the Mechanical Behavior of Isotactic Poly(propylene)s , 2016 .

[6]  Y Zhang,et al.  A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis , 2008 .

[7]  I. Iordanoff,et al.  Modeling damages and cracks growth in composite with a 3D discrete element method , 2016 .

[8]  Ye Jin,et al.  A model research for prototype warp deformation in the FDM process , 2007 .

[9]  A. F. Silva,et al.  Fused deposition modeling with polypropylene , 2015 .

[10]  Ramesh Raskar,et al.  Active Printed Materials for Complex Self-Evolving Deformations , 2014, Scientific Reports.

[11]  M Trombetta,et al.  Combining electrospinning and fused deposition modeling for the fabrication of a hybrid vascular graft , 2010, Biofabrication.

[12]  R. Kitey,et al.  Effect of filler geometry on fracture mechanisms in glass particle filled epoxy composites , 2016 .

[13]  Peihua Gu,et al.  Fabrication of Biomedical Prototypes with Locally Controlled Properties Using FDM , 2002 .

[14]  Syed H. Masood,et al.  Development of new metal/polymer materials for rapid tooling using Fused deposition modelling , 2004 .

[15]  T. Taniguchi,et al.  Mathematical models and numerical simulations of a thermally expandable microballoon for plastic foaming , 2013 .

[16]  D. Karalekas,et al.  In-situ monitoring of strain and temperature distributions during fused deposition modeling process , 2016 .

[17]  P. Tarantili,et al.  Studies on morphology and thermomechanical performance of ABS/PC/organoclay hybrids , 2014 .

[18]  M. Ghaffari,et al.  Rheology, morphology and mechanical properties of polyethylene/ethylene vinyl acetate copolymer (PE/EVA) blends , 2008 .

[19]  C. Bradai,et al.  Phase structure and mechanical properties of PP/EPR/CaCO3 nanocomposites: Effect of particle's size and treatment , 2015 .

[20]  Mickaël Castro,et al.  3D printing of wood fibre biocomposites: From mechanical to actuation functionality , 2016 .

[21]  H. Khonakdar.  Dynamic mechanical analysis and thermal properties of LLDPE/EVA/modified silica nanocomposites , 2015 .

[22]  Michael R Wisnom,et al.  A concise interface constitutive law for analysis of delamination and splitting in composite materials and its application to scaled notched tensile specimens , 2007 .

[23]  H. Choi,et al.  Preparation and interaction characteristics of exfoliated ABS/organoclay nanocomposite , 2010 .

[24]  Lixin Wu,et al.  Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing , 2016 .

[25]  Antreas Kantaros,et al.  Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process , 2013 .

[26]  D. Baird,et al.  Thermoplastic composites reinforced with long fiber thermotropic liquid crystalline polymers for fused deposition modeling , 1998 .

[27]  G. Rizvi,et al.  Effect of processing conditions on the bonding quality of FDM polymer filaments , 2008 .

[28]  K. Lozano,et al.  Nanofiber-reinforced polymers prepared by fused deposition modeling , 2003 .

[29]  D. Notta-Cuvier,et al.  Damage of short-fibre reinforced materials with anisotropy induced by complex fibres orientations , 2014 .

[30]  Caterina Casavola,et al.  Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory , 2016 .

[31]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[32]  W. Zhong,et al.  Short fiber reinforced composites for fused deposition modeling , 2001 .

[33]  Stephen R Hallett,et al.  Cohesive zone length in numerical simulations of composite delamination , 2008 .