论文信息 - Non-alloyed Ni3Al based alloys – preparation and evaluation of mechanical properties

Non-alloyed Ni3Al based alloys – preparation and evaluation of mechanical properties

The paper reports on the fabrication and mechanical properties of Ni3Al based alloy, which represents the most frequently used basic composition of nickel based intermetallic alloys for high temperature applications. The structure of the alloy was controlled through directional solidification. The samples had a multi-phase microstructure. The directionally solidified specimens were subjected to tensile tests with concurrent measurement of acoustic emission (AE). The specimens exhibited considerable room temperature ductility before fracture. During tensile testing an intensive AE was observed.

J. Pešička | F. Chmelík | J. Malcharcziková | M. Kursa | Martin Pohludka

[1] M. Oruč,et al. Effect of temperature on mechanical properties and type of fracture of superalloys Nimonic 80A , 2011 .

[2] L. Kosec,et al. Review of creep resistant alloys for power plant applications , 2011 .

[3] E. Mazancová,et al. HOT DUCTILITY OF TWO HIGH MANGANESE STEELS , 2011 .

[4] J. Cormier,et al. γ′-phase morphology of Ni-based single crystal superalloys as an indicator of the stress concentration in the vicinity of pores , 2009 .

[5] J. Lapin,et al. Effect of size and volume fraction of cuboidal γ ’ precipitates on mechanical properties of single crystal nickel-based superalloy CMSX-4 , 2009 .

[6] J. Lapin,et al. MICROSTRUCTURE DEGRADATION OF NICKEL BASE SINGLE CRYSTAL SUPERALLOY CMSX-4 , 2009 .

[7] James K. Wessel,et al. Handbook of advanced materials : enabling new designs , 2004 .

[8] E. Schulson,et al. On the ductility of Ni3Al: Effects of strain rate, environment and boron , 1997 .

[9] J. Lapin,et al. Effect of ageing on the microstructure and mechanical behaviour of a directionally solidified Ni3Al-based alloy , 1997 .