Improved lithium-sulfur cells with a treated carbon paper interlayer.

A simple, low-cost modification of lithium-sulfur (Li-S) cells by placing a treated carbon paper between the sulfur electrode and the separator has been investigated to significantly improve the performance of Li-S cells. The treated carbon paper was prepared by an alcohol-alkaline/thermal treatment of a commercial Toray carbon paper, introducing hydroxyl functional groups and micro-cracks on the carbon fibers in the carbon paper, which enhances the hydrophilicity and increases surface areas of the carbon paper matrix. The modified Li-S cells deliver a higher initial capacity of 1651 mAh g(-1) at 1.5-2.8 V at a rate of C/5 compared to the cells without any interlayer or with an untreated carbon paper interlayer. The cells with the treated carbon paper offer additional improvement in performance when the discharge cut-off voltage is raised to 1.8 V: 1057, 1002, and 929 mAh g(-1) after 100 cycles, respectively, at C/5, C/2, and 1 C rates. The improved cell performance is attributed to the 3D architecture of the carbon paper interlayer, serving as a conductive skeleton for trapping and depositing dissolved sulfur-containing active materials, as confirmed by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The novel configuration presented here offers a low-cost approach to overcome the persistent problems of Li-S cells.

[1]  Shengdi Zhang.  Role of LiNO3 in rechargeable lithium/sulfur battery , 2012 .

[2]  A. Hirsch.  Functionalization of single-walled carbon nanotubes. , 2002, Angewandte Chemie.

[3]  J. Shim,et al.  The Lithium/Sulfur Rechargeable Cell Effects of Electrode Composition and Solvent on Cell Performance , 2002 .

[4]  Bruno Scrosati,et al.  Moving to a Solid‐State Configuration: A Valid Approach to Making Lithium‐Sulfur Batteries Viable for Practical Applications , 2010, Advanced materials.

[5]  Lu Yue,et al.  Highly hydroxylated carbon fibres as electrode materials of all-vanadium redox flow battery , 2010 .

[6]  Qian Zhang,et al.  A hierarchical architecture S/MWCNT nanomicrosphere with large pores for lithium sulfur batteries. , 2012, Physical chemistry chemical physics : PCCP.

[7]  P. Bruce,et al.  Nanostructured materials for advanced energy conversion and storage devices , 2005, Nature materials.

[8]  Arumugam Manthiram,et al.  A new approach to improve cycle performance of rechargeable lithium-sulfur batteries by inserting a free-standing MWCNT interlayer. , 2012, Chemical communications.

[9]  David M J S Bowman,et al.  Flammable biomes dominated by eucalypts originated at the Cretaceous-Palaeogene boundary. , 2011, Nature communications.

[10]  Arumugam Manthiram,et al.  A facile in situ sulfur deposition route to obtain carbon-wrapped sulfur composite cathodes for lithium-sulfur batteries , 2012 .

[11]  Sébastien Patoux,et al.  Lithium/sulfur cell discharge mechanism: an original approach for intermediate species identification. , 2012, Analytical chemistry.

[12]  Arumugam Manthiram,et al.  Orthorhombic Bipyramidal Sulfur Coated with Polypyrrole Nanolayers As a Cathode Material for Lithium–Sulfur Batteries , 2012 .

[13]  Yuriy V. Mikhaylik,et al.  Li/S fundamental chemistry and application to high-performance rechargeable batteries , 2004 .

[14]  Xiulei Ji,et al.  Stabilizing lithium-sulphur cathodes using polysulphide reservoirs. , 2011, Nature communications.

[15]  Shengbo Zhang.  LiBF3Cl as an alternative salt for the electrolyte of Li-ion batteries , 2008 .

[16]  Christopher Matranga,et al.  Trapped CO2 in Carbon Nanotube Bundles , 2003 .

[17]  M. Prato,et al.  Chemistry of carbon nanotubes. , 2006, Chemical reviews.

[18]  K. M. Abraham,et al.  A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte , 1979 .

[19]  Yong-Mook Kang,et al.  Effects of Nanosized Adsorbing Material on Electrochemical Properties of Sulfur Cathodes for Li/S Secondary Batteries , 2004 .

[20]  Linda F. Nazar,et al.  Positive Electrode Materials for Li-Ion and Li-Batteries† , 2010 .

[21]  Hun‐Gi Jung,et al.  An Advanced Lithium‐Sulfur Battery , 2013 .

[22]  S. Licht,et al.  A Solid Sulfur Cathode for Aqueous Batteries , 1993, Science.

[23]  Yuriy V. Mikhaylik,et al.  Polysulfide Shuttle Study in the Li/S Battery System , 2004 .

[24]  L. Nazar,et al.  A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. , 2009, Nature materials.

[25]  Kang Xu,et al.  Fabrication and evaluation of a polymer Li-ion battery with microporous gel electrolyte , 2005 .

[26]  L. Nazar,et al.  Advances in Li–S batteries , 2010 .

[27]  Xinping Qiu,et al.  New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy , 2009 .

[28]  L. Archer,et al.  Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries. , 2011, Angewandte Chemie.

[29]  Yi Cui,et al.  Improving the performance of lithium-sulfur batteries by conductive polymer coating. , 2011, ACS nano.

[30]  YoungJung Chang,et al.  Electrochemical Impedance Analysis for Lithium Ion Intercalation into Graphitized Carbons , 2000 .

[31]  Xueping Gao,et al.  Enhancement of long stability of sulfur cathode by encapsulating sulfur into micropores of carbon spheres , 2010 .

[32]  Emanuel Peled,et al.  Lithium Sulfur Battery Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions , 1988 .

[33]  Dong Yang,et al.  Hydrothermal treatment to prepare hydroxyl group modified multi-walled carbon nanotubes , 2008 .

[34]  Emanuel Peled,et al.  The electrochemical behavior of polysulfides in tetrahydrofuran , 1985 .

[35]  Peter G. Bruce,et al.  Energy storage beyond the horizon: Rechargeable lithium batteries , 2008 .

[36]  Hee‐Tak Kim,et al.  Rechargeable Lithium Sulfur Battery I. Structural Change of Sulfur Cathode During Discharge and Charge , 2003 .