Low-fibrillated bacterial cellulose nanofibers as a sustainable additive to enhance recycled paper quality.

Bacterial cellulose is a biological macromolecule synthesized by bacteria of high purity and crystallinity. Bacterial cellulose nanofibers (BCNF) have been produced by soft homogenization and added to a recycled pulp to improve its quality. The benefits of BCNF on mechanical, physical and optical paper properties have been quantified and the retention mechanism of the BCNF in the paper network has been proposed. The use of BC to improve paper strength is usually limited by the decrease of tear index. The novelty of this work is that these two effects are decoupled by the addition of BCNF of low fibrillation (35.2%). In this way, some BCNF clusters are produced together with the individual nanofibers. Thus, with the addition of 3% BCNF, tensile and tear indexes as well as strain at break were improved by 11.1, 7.6, and 66.8%, respectively. Furthermore, the clusters were retained in the fiber network not only by hydrogen bonding, but also by physical retention within the gaps. Therefore, the addition of BCNF not only increases the mechanical properties of paper but also makes the handsheets more flexible and facilitates filler retention.

[1]  Marielle Henriksson,et al.  Cellulose nanopaper structures of high toughness. , 2008, Biomacromolecules.

[2]  C. Negro,et al.  Improvement of deinked old newspaper/old magazine pulp suspensions by means of nanofibrillated cellulose addition , 2015, Cellulose.

[3]  K. Oksman,et al.  Improving Bagasse Pulp Paper Sheet Properties with Microfibrillated Cellulose Isolated from Xylanase-Treated Bagasse , 2011 .

[4]  M. Marx‐Figini.  Significance of the intrinsic viscosity ratio of unsubstituted and nitrated cellulose in different solvents , 1978 .

[5]  Somayeh Sheykhnazari,et al.  Preparation and characterization of reinforced papers using nano bacterial cellulose. , 2017, International journal of biological macromolecules.

[6]  Dieter Klemm,et al.  Nanocelluloses: a new family of nature-based materials. , 2011, Angewandte Chemie.

[7]  Qinghua Xu,et al.  Nanocrystalline cellulose from aspen kraft pulp and its application in deinked pulp. , 2013, International journal of biological macromolecules.

[8]  Ana Balea,et al.  Interactions between cellulose nanofibers and retention systems in flocculation of recycled fibers , 2017, Cellulose.

[9]  S. Hedjazi,et al.  Comparative study of paper and nanopaper properties prepared from bacterial cellulose nanofibers and fibers/ground cellulose nanofibers of canola straw , 2013 .

[10]  Sidney José Lima Ribeiro,et al.  Bacterial cellulose membrane as flexible substrate for organic light emitting devices , 2008 .

[11]  Marta Martínez-Sanz,et al.  Optimization of the dispersion of unmodified bacterial cellulose nanowhiskers into polylactide via melt compounding to significantly enhance barrier and mechanical properties. , 2012, Biomacromolecules.

[12]  Øyvind Eriksen,et al.  The effect of MFC on the pressability and paper properties of TMP and GCC based sheets , 2012 .

[13]  A. Balea,et al.  Enhancement of the fermentation process and properties of bacterial cellulose: a review , 2016, Cellulose.

[14]  A H Basta,et al.  Performance of improved bacterial cellulose application in the production of functional paper , 2009, Journal of applied microbiology.

[15]  J. C. Villar,et al.  The Effect of Carbon and Nitrogen Sources on Bacterial Cellulose Production and Properties from Gluconacetobacter sucrofermentans CECT 7291 Focused on its use in Degraded Paper Restoration , 2013 .

[16]  Kristin Syverud,et al.  The use of microfibrillated cellulose produced from kraft pulp as strength enhancer in TMP paper , 2008 .

[17]  D. Danielewicz,et al.  Properties of Composites of Unbeaten Birch and Pine Sulphate Pulps with Bacterial Cellulose , 2008 .

[18]  Ana Balea,et al.  Effect of Bleached Eucalyptus and Pine Cellulose Nanofibers on the Physico-Mechanical Properties of Cartonboard , 2016 .

[19]  Weihua Tang,et al.  The influence of fermentation conditions and post-treatment methods on porosity of bacterial cellulose membrane , 2009 .

[20]  R. Miranda,et al.  Direct production of cellulose nanocrystals from old newspapers and recycled newsprint. , 2017, Carbohydrate polymers.

[21]  M. Jonoobi,et al.  Producing low-cost cellulose nanofiber from sludge as new source of raw materials , 2012 .

[22]  L. Segal',et al.  An Empirical Method for Estimating the Degree of Crystallinity of Native Cellulose Using the X-Ray Diffractometer , 1959 .

[23]  Per Engstrand,et al.  Processing of wood-based microfibrillated cellulose and nanofibrillated cellulose, and applications relating to papermaking: a review , 2016, Cellulose.

[24]  Ana Balea,et al.  Synergies between cellulose nanofibers and retention additives to improve recycled paper properties and the drainage process , 2017, Cellulose.

[25]  K. Cheng,et al.  Effects of CMC addition on bacterial cellulose production in a biofilm reactor and its paper sheets analysis. , 2011, Biomacromolecules.

[26]  Tom Lindström,et al.  Review: On the Nature of Joint Strength in Paper – A Review of Dry and Wet Strength Resins Used in Paper Manufacturing , 2005, Trans. of the XIIIth Fund. Res. Symp. Cambridge, 2005.

[27]  Elena Fuente,et al.  Valorization of Corn Stalk by the Production of Cellulose Nanofibers to Improve Recycled Paper Properties , 2016 .