Economic Model Predictive Control of an Industrial Fluid Catalytic Cracker

Fluid catalytic cracking (FCC) is an important refinery process by which heavy hydrocarbons are cracked to form lighter valuable products over catalyst particles. FCC plants consist of the riser (reactor), the regenerator, and the fractionator that separates the riser effluent into the useful end products. In FCC plants the product specifications and feedstocks change due to varying economic and market conditions. In addition, FCC plants operate with large throughputs and a small improvement realized by optimization and control yields significant economic return. In previous work, we developed a nonlinear dynamic model and validated it with industrial data. In this study, our focus involves the development and application of a real-time optimization framework. We propose a hierarchical structure which includes a two-layer implementation of economic model predictive control (EMPC). EMPC provides the optimal riser and the regenerator temperature reference trajectories which are determined from a dynamic opt...

[1]  I. Lefkowitz,et al.  Multilevel Approach Applied to Control System Design , 1966 .

[2]  Wolfgang Marquardt,et al.  A two-layer architecture for economically optimal process control and operation , 2011 .

[3]  Panagiotis D. Christofides,et al.  Economic model predictive control of nonlinear process systems using Lyapunov techniques , 2012 .

[4]  Zoltan K. Nagy,et al.  Dynamic modelling and nonlinear model predictive control of a Fluid Catalytic Cracking Unit , 2009, Comput. Chem. Eng..

[5]  David Angeli,et al.  On convergence of averagely constrained economic MPC and necessity of dissipativity for optimal steady-state operation , 2013, 2013 American Control Conference.

[6]  Wenkai Li,et al.  Integrating CDU, FCC and product blending models into refinery planning , 2005, Comput. Chem. Eng..

[7]  Lincoln F. L. Moro,et al.  Constrained multivariable control of fluid catalytic cracking converters , 1995 .

[8]  Moses O. Tadé,et al.  Constrained nonlinear multivariable control of a fluid catalytic cracking process , 2000 .

[9]  Wolfgang Marquardt,et al.  Structural Concepts for Optimization Based Control of Transient Processes , 2000 .

[10]  A. Arbel,et al.  Dynamics and Control of Fluidized Catalytic Crackers. 3. Designing the Control System: Choice of Manipulated and Measured Variables for Partial Control , 1996 .

[11]  David Q. Mayne,et al.  Constrained model predictive control: Stability and optimality , 2000, Autom..

[12]  Manfred Morari,et al.  Studies in the synthesis of control structures for chemical processes: Part I: Formulation of the problem. Process decomposition and the classification of the control tasks. Analysis of the optimizing control structures , 1980 .

[13]  Moritz Diehl,et al.  A Lyapunov Function for Economic Optimizing Model Predictive Control , 2011, IEEE Transactions on Automatic Control.

[14]  Lorenz T. Biegler,et al.  Economic Nonlinear Model Predictive Control for periodic optimal operation of gas pipeline networks , 2013, Comput. Chem. Eng..

[15]  C. McGreavy,et al.  A multivariable coordinated control system based on predictive control strategy for FCC reactor-regenerator system , 1996 .

[16]  Yaman Arkun,et al.  Plant-wide hierarchical optimization and control of an industrial hydrocracking process , 2013 .

[17]  Panagiotis D. Christofides,et al.  Integrating dynamic economic optimization and model predictive control for optimal operation of nonlinear process systems , 2014 .

[18]  Y. A. Liu,et al.  Predictive Modeling of Large-Scale Integrated Refinery Reaction and Fractionation Systems from Plant Data. Part 2: Fluid Catalytic Cracking (FCC) Process , 2011 .

[19]  Mircea Vasile Cristea,et al.  Comparison between different control approaches of the UOP fluid catalytic cracking unit , 2007 .

[20]  Vineet Kumar,et al.  A new generic approach for the modeling of fluid catalytic cracking (FCC) riser reactor , 2007 .

[21]  David Angeli,et al.  Economic optimization using model predictive control with a terminal cost , 2011, Annu. Rev. Control..

[22]  David Angeli,et al.  On Average Performance and Stability of Economic Model Predictive Control , 2012, IEEE Transactions on Automatic Control.

[23]  Wolfgang Marquardt,et al.  A Two-Level Strategy of Integrated Dynamic Optimization and Control of Industrial Processes—a Case Study , 2002 .

[24]  Darci Odloak,et al.  Industrial implementation of a real-time optimization strategy for maximizing production of LPG in a FCC unit , 2000 .

[25]  Lorenz T. Biegler,et al.  Optimizing process economics online using model predictive control , 2013, Comput. Chem. Eng..