An integrated approach to the high-speed machining of moulds and dies involving both a knowledge-based system and a chatter detection and control system

Abstract Over the past decade, high-speed machining (HSM) has provided a step change in productivity for the manufacture of moulds and dies, particularly those made from tool steels in the fully hardened state. Advantages include reduced machining times and costs and favourable workpiece surface integrity. The knowledge and expertise that have been generated in academia and industry are widespread and important for the efficient utilization of HSM. Following a survey of relevant publications, the present paper details the development of an integrated system for the HSM of moulds and dies. This included the design and implementation of a knowledge-based system (KBS) and a chatter detection and control system. The main modules of the KBS related to machine tools, cutting tools and machinability data, toolholders, cutter path strategies and troubleshooting, together with a database management centre. Ranking techniques were employed with combined weighing factors, together with tool rationalization and reduction strategies, fuzzy logic and machinability data optimization. The chatter detection and control system utilized a microphone to detect chatter and employed online spindle speed and feed rate modification strategies for its suppression. The system was capable of being interfaced with the KBS in order to transfer and store local knowledge unique to a particular toolmaker's operations.

[1]  Herbert Schulz,et al.  High-Speed Machining , 1992 .

[2]  P G Maropoulos,et al.  Automatic tool selection for milling operations Part 2: Tool sorting and variety reduction , 2000 .

[3]  D. Aspinwall,et al.  A review of ultra high speed milling of hardened steels , 1997 .

[4]  Toshio Kojima,et al.  An expert system of machining operation planning in Internet environment , 2000 .

[5]  Y. S. Wong,et al.  Knowledge-based systems in the machining domain , 1991 .

[6]  J. S. Agapiou,et al.  The Optimization of Machining Operations Based on a Combined Criterion, Part 1: The Use of Combined Objectives in Single-Pass Operations , 1992 .

[7]  P G Maropoulos,et al.  Cutting Tool Selection: An Intelligent Methodology and its Interfaces with Technical and Planning Functions , 1992 .

[8]  P G Maropoulos,et al.  Automatic tool selection for milling operations Part 1: Cutting data generation , 2000 .

[9]  Yuan Ning,et al.  Monitoring of Chatter in High Speed Endmilling Using Audio Signals Method , 2000 .

[10]  Marco Santochi,et al.  COATS: an Expert Module for Optimal Tool Selection , 1986 .

[11]  T. Delio,et al.  Sensor-Based Chatter Detection and Avoidance by Spindle Speed Selection , 1992 .

[12]  Yusuf Altintas,et al.  Mechanics and dynamics of general milling cutters.: Part II: inserted cutters , 2001 .

[13]  Daniel B. Dallas.  Tool and manufacturing engineers handbook : a reference work for manufacturing engineers , 1976 .

[14]  Herbert Schulz.  High-speed machining in die and mold manufacturing , 1996 .

[15]  K. Ridgway,et al.  Ex-catsmill An Expert System For Selecting Cutting Tooils And Conditions For Milling , 1994 .

[16]  Pierre Bourdet,et al.  Tool Automatic Choice: A Step to Elaborate Automatically Process Planning , 1987 .

[17]  S. Smith,et al.  Use of Audio Signals for Chatter Detection and Control , 1992 .

[18]  J. S. Agapiou.  The Optimization of Machining Operations Based on a Combined Criterion, Part 2: Multipass Operations , 1992 .

[19]  K. Hashmi,et al.  Fuzzy logic based intelligent selection of machining parameters , 1998 .

[20]  Jukka Paro,et al.  High-Speed Milling in Tooling Production , 1995 .

[21]  Yusuf Altintas,et al.  Mechanics and dynamics of general milling cutters.: Part I: helical end mills , 2001 .

[22]  Philip K. Chan,et al.  In-process detection and suppression of chatter in milling , 1992 .

[23]  David Dornfeld,et al.  Modeling and Experimental Analysis of Acoustic Emission from Metal Cutting , 1989 .