Physics-based modelling of fission gas swelling and release in UO2 applied to integral fuel rod analysis

Abstract A physics-based model is developed for analysing the coupled phenomena of fission gas swelling and release in UO 2 fuel during irradiation. The model is featured by a level of complexity suitable for application to integral fuel rod analysis and consistent with the uncertainties pertaining to some parameters. The emphasis is on the modelling of the grain-face gas bubble development and the related dependence of the fission gas swelling and release on the local hydrostatic stress, which is of special importance for the analysis of the fuel behaviour during power ramps and pellet-cladding mechanical interaction conditions. The applicability of the new model to integral fuel rod analysis is verified through implementation and testing in the TRANSURANUS fuel rod analysis code. In the frame of the IAEA co-ordinated research project on Fuel Modelling at Extended Burn-up FUMEX-III, the model is applied to the simulation of irradiation experiments from the OECD/NEA International Fuel Performance Experiments database. The comparison of the results with the available experimental data of fission gas swelling and release at moderate burn-up is presented as a first step of validation, pointing out an encouraging predictive accuracy for different irradiation conditions, without any fitting applied to the model parameters.

[1]  Grigori Khvostov,et al.  A model for fission gas release and gaseous swelling of the uranium dioxide fuel coupled with the FALCON code , 2011 .

[2]  J. Rest,et al.  The effect of irradiation-induced gas-atom re-solution on grain-boundary bubble growth , 2003 .

[3]  Kazuhiro Nogita,et al.  Formation and growth of intragranular fission gas bubbles in UO2 fuels with burnup of 6–83 GWd/t , 1993 .

[4]  K. Une,et al.  Effect of external restraint on bubble swelling in U02 fuels , 1997 .

[5]  J. A. Turnbull,et al.  The distribution of intragranular fission gas bubbles in UO2 during irradiation , 1971 .

[6]  F. A. Johnson,et al.  The diffusion coefficients of gaseous and volatile species during the irradiation of uranium dioxide , 1982 .

[7]  R. J. White,et al.  A new fission-gas release model , 1983 .

[8]  P. Van Uffelen,et al.  On the role of grain boundary diffusion in fission gas release , 2001 .

[9]  Donald R. Olander,et al.  Fundamental Aspects of Nuclear Reactor Fuel Elements , 1976 .

[10]  M. V. Speight,et al.  Vacancy Potential and Void Growth on Grain Boundaries , 1975 .

[11]  Donald R. Olander,et al.  Re-solution of fission gas : A review: Part. I. Intragranular bubbles , 2006 .

[12]  M. V. Speight,et al.  A Calculation on the Migration of Fission Gas in Material Exhibiting Precipitation and Re-solution of Gas Atoms Under Irradiation , 1969 .

[13]  J. Jacoud,et al.  An efficient model for the analysis of fission gas release , 2002 .

[14]  K. Lassmann,et al.  The structure of fuel element codes , 1980 .

[15]  M. S. Veshchunov,et al.  Modelling of grain face bubbles coalescence in irradiated UO2 fuel , 2008 .

[16]  H. Matzke,et al.  Gas release mechanisms in UO2—a critical review , 1980 .

[17]  H. Zimmermann.  Investigations on swelling and fission gas behaviour in uranium dioxide , 1978 .

[18]  L. C. Bernard,et al.  Finite volume method for fission gas release modeling , 1997 .

[19]  M. Mogensen,et al.  An experimental study of the distribution of retained xenon in transient-tested UO2 fuel , 1993 .

[20]  E. Sartori,et al.  FUMEX-III: A New IAEA Coordinated Research Project on Fuel Modelling at Extended Burnup , 2009 .

[21]  K. Forsberg,et al.  Calculation of grain boundary gaseous swelling in UO2 , 2008 .

[22]  Pekka Lösönen,et al.  Modelling intragranular fission gas release in irradiation of sintered LWR UO2 fuel , 2002 .

[23]  Pedro Ortego,et al.  A review of nuclear fuel performance codes , 2005 .

[24]  Van Uffelen Paul,et al.  Analysis of Reactor Fuel Rod Behaviour , 2010 .

[25]  Frank S. Ham,et al.  Theory of diffusion-limited precipitation , 1958 .

[26]  S. Harriague,et al.  BACO (Barra Combustible), a computer code for simulating a reactor fuel rod performance , 1980 .

[27]  Glyn Rossiter,et al.  DEVELOPMENT OF THE ENIGMA FUEL PERFORMANCE CODE FOR WHOLE CORE ANALYSIS AND DRY STORAGE ASSESSMENTS , 2011 .

[28]  M. Verwerft,et al.  In-pile Xe diffusion coefficient in UO2 determined from the modeling of intragranular bubble growth and destruction under irradiation , 2008 .

[29]  K. Lassmann,et al.  TRANSURANUS: a fuel rod analysis code ready for use , 1992 .

[30]  P. Garcia,et al.  Nucleation and growth of intragranular defect and insoluble atom clusters in nuclear oxide fuels , 2012 .

[31]  K. Mikityuk,et al.  FRED fuel behaviour code: Main models and analysis of Halden IFA-503.2 tests , 2011 .

[32]  Byung-Ho Lee,et al.  FUEL PERFORMANCE CODE COSMOS FOR ANALYSIS OF LWR UO2AND MOX FUEL , 2011 .

[33]  Kenneth J. Geelhood.  RECENT UPDATES TO NRC FUEL PERFORMANCE CODES AND PLANS FOR FUTURE IMPROVEMENTS , 2011 .

[34]  R. J. White,et al.  The development of grain-face porosity in irradiated oxide fuel , 2004 .

[35]  G. L. Reynolds,et al.  Grain-boundary diffusion in uranium dioxide: The correlation between sintering and creep and a reinterpretation of creep mechanism , 1979 .

[36]  Toshiaki Kogai,et al.  Modelling of fission gas release and gaseous swelling of light water reactor fuels , 1997 .

[37]  P. Van Uffelen,et al.  Multiscale modelling for the fission gas behaviour in the TRANSURANUS code , 2011 .

[38]  Van Uffelen Paul,et al.  Application of the Extended TRANSURANUS Code in the FUMEX-III Project , 2011 .

[39]  C. Calvin,et al.  High Performance Computing in Nuclear Engineering , 2010 .

[40]  J. B. Ainscough,et al.  Isothermal grain growth kinetics in sintered UO2 pellets , 1973 .

[41]  Yang-Hyun Koo,et al.  Analysis of fission gas release and gaseous swelling in UO , 2000 .

[42]  Kenichi Ito,et al.  The effect of cladding restraint on fission gas release behavior , 1988 .