论文信息 - Uncertainty and Dimensional Calibrations

Uncertainty and Dimensional Calibrations

The calculation of uncertainty for a measurement is an effort to set reasonable bounds for the measurement result according to standardized rules. Since every measurement produces only an estimate of the answer, the primary requisite of an uncertainty statement is to inform the reader of how sure the writer is that the answer is in a certain range. This report explains how we have implemented these rules for dimensional calibrations of nine different types of gages: gage blocks, gage wires, ring gages, gage balls, roundness standards, optical flats indexing tables, angle blocks, and sieves.

Ted Doiron | John Stoup | J. Stoup | T. Doiron

[1] John S. Beers. A Gage Block Measurement Process Using Single Wavelength Interferometry , 1975 .

[2] J M Cameron,et al. The use of the method of least squares in calibration , 1974 .

[3] Ted Doiron,et al. The Gage block handbook , 1995 .

[4] E. Iso,et al. Measurement Uncertainty and Probability: Guide to the Expression of Uncertainty in Measurement , 1995 .

[5] B Nelson Norden,et al. On the compression of a cylinder in contact with a plane surface , 1973 .

[6] Massimo Piattelli-Palmarini,et al. Inevitable Illusions: How Mistakes of Reason Rule Our Minds , 1994 .

[7] T. Modis,et al. Experts in uncertainty , 1993 .

[8] John S Beers,et al. Length scale measurement procedures at the National Bureau of Standards , 1987 .

[9] Barry N. Taylor,et al. Guidelines for Evaluating and Expressing the Uncertainty of Nist Measurement Results , 2017 .

[10] J S Beers,et al. Intercomparison Procedures for Gage Blocks Using Electromechanical Comparators. , 1976 .

[11] Charles P Reeve. The calibration of a roundness standard , 1979 .

[12] Charles P Reeve,et al. The calibration of indexing tables by subdivision , 1975 .

[13] C. P. Reeve,et al. The calibration of angle blocks by intercomparison , 1980 .

[14] K P Birch,et al. The effect of variations in the refractive index of industrial air upon the uncertainty of precision length measurement. , 1993 .

[15] J. Schwider,et al. IV Interferometric Testing of Smooth Surfaces , 1976 .