Improving mechanical properties of AZ91D magnesium/A356 aluminum bimetal prepared by compound casting via a high velocity oxygen fuel sprayed Ni coating

[1]  R. Dojka,et al.  The Impact of Process Factors on Creating Defects, Mainly Lustrous Carbon, during the Production of Ductile Iron Using the Lost-Foam Casting (LFC) Method , 2020, Metals.

[2]  A. Luo,et al.  Predicting and controlling interfacial microstructure of magnesium/aluminum bimetallic structures for improved interfacial bonding , 2020 .

[3]  Jiangfeng Song,et al.  Latest research advances on magnesium and magnesium alloys worldwide , 2020, Journal of Magnesium and Alloys.

[4]  R. Raiszadeh,et al.  Formation Mechanisms and Microstructure Characterization of Al/Al3Ni In-situ Composite by Compound Casting , 2019, Metallurgical and Materials Transactions B.

[5]  Xue-song Liu,et al.  Effects of Zn on intermetallic compounds and strength of Al/Mg joints ultrasonically soldered in air , 2019, Journal of Materials Processing Technology.

[6]  A. Luo,et al.  Inhibiting Brittle Intermetallic Layer in Magnesium/Aluminum Bimetallic Castings via In Situ Formation of Mg2Si Phase , 2019, Metallurgical and Materials Transactions B.

[7]  Sudhir Kumar,et al.  Experimental Investigation and Parametric Optimization of AA6063/AA6351 Alloys Bimetallic Prepared by Vacuum-Assisted Lost Foam Compound Casting Process , 2019, International Journal of Metalcasting.

[8]  A. K. Birru,et al.  Mechanical and metallurgical properties of friction stir welded dissimilar joints of AZ91 magnesium alloy and AA 6082-T6 aluminium alloy , 2019, Journal of Magnesium and Alloys.

[9]  A. Gerlich,et al.  Dissimilar laser welding of an AA6022-AZ31 lap-joint by using Ni-interlayer: Novel beam-wobbling technique, processing parameters, and metallurgical characterization , 2019, Optics & Laser Technology.

[10]  Fei Wang,et al.  A coupled EBSD/TEM study on the interfacial structure of Al/Mg/Al laminates , 2019, Journal of Alloys and Compounds.

[11]  D. Min.  Ultrasonic semi-solid soldering 6061 aluminum alloys joint with Sn-9Zn solder reinforced with nano/nano+micron Al2O3 particles. , 2019, Ultrasonics sonochemistry.

[12]  Yong Chen,et al.  Microstructure and Corrosion Behavior of Friction Stir-Welded 6061 Al/AZ31 Mg Joints with a Zr Interlayer , 2019, Materials.

[13]  Z. Fan,et al.  The role of vacuum degree in the bonding of Al/Mg bimetal prepared by a compound casting process , 2019, Journal of Materials Processing Technology.

[14]  M. Gwoździk,et al.  The Effect of a Zinc Interlayer on the Microstructure and Mechanical Properties of a Magnesium Alloy (AZ31)–Aluminum Alloy (6060) Joint Produced by Liquid–Solid Compound Casting , 2019, JOM.

[15]  H. Omidvar,et al.  In-situ nanocomposite in friction stir welding of 6061-T6 aluminum alloy to AZ31 magnesium alloy , 2019, Journal of Materials Processing Technology.

[16]  F. Karimzadeh,et al.  Comparative study on microstructure and corrosion behavior of nanostructured hydroxyapatite coatings deposited by high velocity oxygen fuel and flame spraying on AZ61 magnesium based substrates , 2019, Applied Surface Science.

[17]  Z. Fan,et al.  New Insights into the Characterization and Formation of the Interface of A356/AZ91D Bimetallic Composites Fabricated by Compound Casting , 2018, Metallurgical and Materials Transactions A.

[18]  Z. Fan,et al.  Interfacial microstructures and mechanical properties of Mg/Al bimetal produced by a novel liquid-liquid compound casting process , 2018, Journal of Materials Processing Technology.

[19]  Zhipeng Ma,et al.  Control Al/Mg intermetallic compound formation during ultrasonic-assisted soldering Mg to Al. , 2018, Ultrasonics sonochemistry.

[20]  Pooria Moozarm Nia,et al.  Comparative study on the corrosion and wear behavior of plasma-sprayed vs. high velocity oxygen fuel-sprayed Al8Si20BN ceramic coatings , 2018, Ceramics International.

[21]  H. Omidvar,et al.  The effect of changing chemical composition on dissimilar Mg/Al friction stir welded butt joints using zinc interlayer , 2018, Journal of Manufacturing Processes.

[22]  Yongguang Zhang,et al.  Influence of Ni Interlayer on Microstructure and Mechanical Properties of Mg/Al Bimetallic Castings , 2018, Metallurgical and Materials Transactions A.

[23]  F. Yin,et al.  Effect of Ni interlayer on characteristics of diffusion bonded Mg/Al joints , 2018 .

[24]  Z. Fan,et al.  Fabrication and microstructure evolution of Al/Mg bimetal using a near-net forming process , 2017 .

[25]  Yujuan Wu,et al.  Effects of process parameters on microstructure and mechanical properties of friction stir lap linear welded 6061 aluminum alloy to NZ30K magnesium alloy , 2017 .

[26]  Qiang Miao,et al.  Slurry Erosion Behavior of F6NM Stainless Steel and High-Velocity Oxygen Fuel-Sprayed WC-10Co-4Cr Coating , 2017, Journal of Thermal Spray Technology.

[27]  Huihui Yu,et al.  Compressive mechanical behavior of Al/Mg composite rods with different types of Al sleeve , 2016 .

[28]  Li Yang,et al.  Effects of Melt-to-Solid Insert Volume Ratio on the Microstructures and Mechanical Properties of Al/Mg Bimetallic Castings Produced by Lost Foam Casting , 2016, Metallurgical and Materials Transactions A.

[29]  A. Luo,et al.  Interface formation in magnesium/aluminium bimetallic castings with a nickel interlayer , 2016 .

[30]  Z. Fan,et al.  Investigation on the Interface Characteristics of Al/Mg Bimetallic Castings Processed by Lost Foam Casting , 2016, Metallurgical and Materials Transactions A.

[31]  Q. Shen,et al.  Accelerated Bonding of Magnesium and Aluminum with a CuNi/Ag/CuNi Sandwich Interlayer by Plasma-Activated Sintering , 2016, Metallurgical and Materials Transactions A.

[32]  Q. Shen,et al.  Formation of intermetallic compounds in Mg–Ag–Al joints during diffusion bonding , 2014, Journal of Materials Science.

[33]  A. Luo,et al.  Interfacial phenomena in magnesium/aluminum bi-metallic castings , 2014 .

[34]  Q. Shen,et al.  Effect of Al thin film and Ni foil interlayer on diffusion bonded Mg–Al dissimilar joints , 2013 .

[35]  Fei Liu,et al.  Effect of Al foils interlayer on microstructures and mechanical properties of Mg–Al butt joints welded by gas tungsten arc welding filling with Zn filler metal , 2013 .

[36]  E. Hajjari,et al.  Comparison between conventional and lost foam compound casting of Al/Mg light metals , 2013 .

[37]  Q. Shen,et al.  Effect of silver interlayer on microstructure and mechanical properties of diffusion-bonded Mg–Al joints , 2012 .

[38]  Q. Shen,et al.  An investigation on diffusion bonding of aluminum and magnesium using a Ni interlayer , 2012 .

[39]  S. Mei,et al.  Characterization and formation mechanism of laser-welded Mg and Al alloys using Ti interlayer , 2012 .

[40]  Qi Zhou,et al.  Microstructure characteristics and mechanical properties of cold metal transfer welding Mg/Al dissimilar metals , 2012 .

[41]  L. M. Zhao,et al.  Effect of interlayer composition on the microstructure and strength of diffusion bonded Mg/Al joint , 2009 .

[42]  V. Raghavan.  Al-Mg-Ni (Aluminum-Magnesium-Nickel) , 2009 .

[43]  Fencheng Liu,et al.  Bonding of Mg and Al with Mg–Al eutectic alloy and its application in aluminum coating on magnesium , 2009 .

[44]  Liming Liu,et al.  Microstructure of laser-TIG hybrid welds of dissimilar Mg alloy and Al alloy with Ce as interlayer , 2006 .

[45]  C. Davidson,et al.  Solidification and precipitation behaviour of Al-Si-Mg casting alloys , 2001 .

[46]  Q. Shen,et al.  Microstructure and mechanical properties of diffusion-bonded Mg–Al joints using silver film as interlayer , 2013 .

[47]  Liming Liu,et al.  Fusion welding of Fe-added lap joints between AZ31B magnesium alloy and 6061 aluminum alloy by hybrid laser–tungsten inert gas welding technique , 2012 .